ページ1に含まれる内容の要旨
READ AND SAVE THESE INSTRUCTIONS
PRIMA SNUGGER
Ceiling Fan Owner's Manual
Model Numbers
CF905BS00 CF905ORB00
CF905CK00 CF905VNB00
CF905GES00
Net Weight: 18.3 Lbs.
Part No. F40BP74320000 Form No. BP7432
U.L. Model No.: CF905
ページ2に含まれる内容の要旨
! WARNING WARNING: To avoid fire, shock, and serious personal injury, follow these instructions. Safety Instructions 1. Read your owner’s manual carefully and keep it for future reference. 2. Before servicing or cleaning unit, switch power off at service panel and lock service panel disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a warning device, such as a tag, to the service panel. 3. Be careful of
ページ3に含まれる内容の要旨
EMERSON QUICK START GUIDE The Quick Start Guide covers the installation ! WARNING instructions common for ceiling fan operations. If additional assistance with wiring, alternate hanging To reduce the risk of fire, electric shock, or systems, or lighting options, proceed to the complete personal injury, mount fan to outlet box marked instructions of this Owner’s Manual. “Acceptable for Fan Support of 15.9 kg (35 lbs) or less", and use screws supplied with outlet box. The Quick Start Guide section
ページ4に含まれる内容の要旨
EMERSON QUICK START GUIDE How to Put Your Ceiling Fan Together (pages 9 & 10) 1. Remove the 10-24 x 3/8” pan head screw with lockwasher KEY HOLE SLOT nearest the hook from the ceiling mounting plate and retain for later use. Loosen the remaining two 10-24 x 3/8” pan head screws several turns. 2. While still attached to the mounting plate hook, pivot the fan motor assembly upwards and mate it up against the ceiling mounting plate. Align and engage the two keyhole slots with 10-24 x 3/8" PAN th
ページ5に含まれる内容の要旨
4 3 2 1 0 EMERSON QUICK START GUIDE How to Put Your Ceiling Fan Together (pages 10 & 11) 11. Attach one blade assembly to the motor using the two 1/4-20 x 9/16” captive flange screws with lockwashers. Make sure the screws are tightened securely. Repeat this procedure for the BLADE FLANGE ASSEMBLY other four blade assemblies. NOTE: Take care not to scratch the fan housing when installing the blade assemblies. 1/4-20 x 9/16" CAPTIVE 12. Remove the four switch housing assembly mounting screws F
ページ6に含まれる内容の要旨
This Manual Is Designed to Make it as Easy as Possible for You to Assemble, Install, Operate and Maintain Your Ceiling Fan Installed Wire Length Wire Size A.W.G. Tools Needed for Assembly Up to 50 ft. 14 One Phillips head screwdriver One stepladder 50-100 ft. 12 One 1/4” blade screwdriver One wire stripper MATERIALS ! WARNING Wiring outlet box and box connectors must be of Before assembly your ceiling fan, refer to section type required by the local code. The minimum wire on proper method of wir
ページ7に含まれる内容の要旨
Electrical Requirements Your new ceiling fan will require a grounded electrical ! WARNING supply line of 120 volts AC, 60 Hz, 15 amp circuit. The ceiling structure must be capable of reliably Turning off wall switch is not sufficient. To avoid supporting at least 50 pounds. possible electrical shock, be sure electricity is turned off at the main fuse box before wiring. All wiring must be in accordance with National and ! Local codes and the ceiling fan must be properly WARNING grounded as a prec
ページ8に含まれる内容の要旨
How to Hang Your Ceiling Fan (continued) 1. Disconnect electrical power to the branch circuit at CEILING the circuit breaker or fuse box before attempting to install the ceiling fan mounting plate on the outlet box. 2. Pull the electrical supply black white, and ground wires through the center opening of the ceiling AT LEAST mounting plate before securing the plate to the 7' outlet box as shown in Figure 2. 3. Position the ceiling mounting plate onto the outlet Figure 1 FLOOR box and secure usi
ページ9に含まれる内容の要旨
How to Put Your Ceiling Fan Together 1. Remove the 10-24 x 3/8” pan head screw with KEY HOLE SLOT lockwasher nearest the hook from the ceiling mounting plate and retain for later use. Loosen the remaining two 10-24 x 3/8” pan head screws several turns. 2. While still attached to the ceiling mounting plate hook, pivot the fan motor assembly upwards and 10-24 x 3/8" PAN mate it up against the ceiling mounting plate. Align HEAD SCREW WITH and rotate the motor assembly to engage the two LOCKWASHER
ページ10に含まれる内容の要旨
How to Put Your Ceiling Fan Together (continued) 9. Push the trim ring upwards and rotate so that it engages and locks onto the four mounting screw heads of the fan housing cover (Figure 9). MOUNTING SCREW HEADS 10. Mount the blade flanges to the fan blades using three 10-24 x 5/16” washer head blade screws CEILING TRIM RING per blade (supplied) (Figure 10). Repeat for the four remaining blades. FAN HOUSING ! WARNING COVER To reduce the risk of personal injury, do not bend the blade flange when
ページ11に含まれる内容の要旨
How to Put Your Ceiling Fan Together (continued) 14. Position the switch housing assembly on the SWITCH switch housing plate and align the holes in the HOUSING ASSEMBLY switch housing assembly with the holes in the plate. Secure the switch housing assembly by reinstalling the four screws removed previously (Figure 13). MOUNTING SCREWS (4) Figure 13 Operating Your Ceiling Fan 1. All fans are shipped from the factory with the REVERSE reversing switch positioned to circulate air downward. SWITCH I
ページ12に含まれる内容の要旨
4 3 2 1 0 4 3 2 1 0 Wall Control Installation This control is designed to operate only one ceiling fan, and not an accessory light kit. This wall control is rated for 1.2 amps at 120 volts. NOTE: The “0” position is OFF. The four fan speeds are selected by sliding the bar to the other four speed positions (“1”, “2”, “3” and “4”). ! WARNING Turning off wall switch is not sufficient. To avoid WALL possible electrical shock, be sure electricity is OUTLET SWITCH turned off at the main fuse box befo
ページ13に含まれる内容の要旨
Energy Efficient Use of Ceiling Fans Ceiling fan performance and energy savings rely Using the Ceiling Fan Year Round. In the summer, heavily on the proper installation and use of the use the ceiling fan in the counter-clockwise direction. ceiling fan. Here are a few tips to ensure quality and The airflow produced by the ceiling fan creates a product performance. wind-chill effect, making you "feel" cooler. Select a fan speed that provides a comfortable breeze, lower Choosing the Appropriate Mou
ページ14に含まれる内容の要旨
Trouble Shooting WARNING: For your own safety, turn off power at fuse box or circuit breaker before trouble shooting your fan. ! TROUBLE PROBABLE CAUSE SUGGESTED REMEDY 1. Fan will not start. 1. Fuse or circuit breaker blown. 1. Check main and branch circuit fuses or circuit breakers. 2. Loose power line connections to the fan, 2. Check line wire connections to fan and switch or loose switch wire connections in the wire connections in the switch housing. switch housing. ! WARNING: Make sure mai
ページ15に含まれる内容の要旨
Repair Parts Key Model Numbers No. Description CF905BS00 CF905CK00 CF905GES00 CF905ORB00 CF905VNB00 1 Ceiling Mounting Plate 764136 764136 764136-1 764136-1 764136-1 2 Fan Housing Trim Ring 764130-BS 764130-CK 764130-GES 764130-ORB 764130-VNB 3 Fan Housing Cover 764131-BS 764131-CK 764131-GES 764131-ORB 764131-VNB 4 Fan Blades (5 per set) 764107 764107-2 764107 764107-1 764107-1 5 Fan Blade Flanges (5 per set) 764105-BS 764105-CK 764105-GES 764105-ORB 764105-VNB 6 Wiring Harness 764132-BK 764132
ページ16に含まれる内容の要旨
LIMITED WARRANTY What The Warranty Covers: This warranty covers the motor and the other components and accessories of your Emerson ceiling fan against all defects in workmanship and materials. You must be the original purchaser or user of the product to be covered. What The Period Of Coverage Is: As it applies to the motor, this warranty will last for the lifetime of your ceiling fan. All other components and accessories are covered by this warranty for one year from the date you purchased your
