ページ1に含まれる内容の要旨
READ AND SAVE THESE INSTRUCTIONS
Model No.
CF705SAB02 CF704SAB02
CF705SPB02 CF704SPB02
CF705SWW02 CF704SWW02
DATE CODE:
The date code of this fan
CF705SW02 CF704SW02
may be found on the box,
stamped in ink on a white
label. CF705SAW02 CF704SAW02
You should record this
data above and keep it in
Net Weight: 14.0 Lbs. Net Weight: 11.0 Lbs.
a safe place for future use.
by
®
TRADITIONAL SNUGGER
Ceiling Fan Owner's Manual
Part No. F40BP70800006 Form No. BP7080-6
ページ2に含まれる内容の要旨
! WARNING WARNING: To avoid fire, shock, and serious personal injury, follow these instructions. Safety Instructions 1. Read your owner’s manual carefully and keep it for future reference. 2. Before servicing or cleaning unit, switch power off at service panel and lock service panel disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a warning device, such as a tag, to the service panel. 3. Be careful of
ページ3に含まれる内容の要旨
Unpacking Instructions For your convenience, check-off boxes are provide next to each step. As each step is completed, place a check mark in the box. This will insure that all steps have been completed and will be helpful in finding your place should you be interrupted. NOTE: Place the parts from the loose parts bag in ! WARNING a small container to keep them from being lost. If any parts are missing, contact your local retailer Do not install or use fan if any part is damaged or or catalog outl
ページ4に含まれる内容の要旨
How to Hang Your Ceiling Fan 3. Carefully lift the fan motor assembly and engage ! WARNING the slot in the motor bracket with the hook on the mounting plate so that it is securely suspended The fan must be hung with at least 7' of clearance (Figure 3). Then connect wiring to your fan from floor to blades (Figure 1). according to section "HOW TO WIRE YOUR CEILING FAN". CEILING MOUNTING PLATE RUBBER AT LEAST WASHER 7' THREADED MOTOR STUDS SUPPLY WIRE FLOOR LEADS Figure 1 MOTOR BRACKET ! WARNING Th
ページ5に含まれる内容の要旨
How To Wire Your Ceiling Fan If you feel that you do not have enough electrical NOTE: If you are using an Emerson Light Fixture wiring knowledge or experience, have your fan with your fan, see the Light Fixture Owner’s installed by a licensed electrician. Manual for wiring. 2. Connect the fan motor white wire to the supply ! WARNING white (neutral) wire using a listed wire connector (Figure 5). To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiri
ページ6に含まれる内容の要旨
NOTE: Take care not to scratch the fan housing Maintenance when installing the blade assemblies. IMPORTANT CARE INSTRUCTIONS For Your Ceiling Fan Periodic cleaning of your new ceiling fan is the only BLADE maintenance that is needed. When cleaning, use only a soft brush or lint free cloth to avoid scratching the finish. Abrasive cleaning agents are not required and should be avoided to prevent damage to finish. ! WARNING BLADE FLANGE 1/4-20 x 1/2" SCREW Do not use water when cleaning your ceilin
ページ7に含まれる内容の要旨
! WARNING: FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER BEFORE TROUBLE SHOOTING YOUR FAN. Trouble Shooting TROUBLE PROBABLE CAUSE SUGGESTED REMEDY 1. Fan will not 1. Reversing switch in neutral position. 1. Make sure reversing switch position is all the way to start. one side. 2. Fuse or circuit breaker blown. 2. Check main and branch circuit fuses or circuit breakers. 3. Loose power line connections to the fan, or 3. Check line wire connections to fan and switch loose swit
ページ8に含まれる内容の要旨
Repair Parts List Part Numbers Key Model No. Model No. Model No. Model No. Model No. Model No. Model No. Model No. Model No. Model No. No. Description CF705SWW02 CF705SPB02 CF705SAB02 CF705SW02 CF705SAW02 CF704SWW02 CF704SPB02 CF704SAB02 CF704SW02 CF704SAW02 1 Switch Housing Assembly 761533-2 761533-1 761533 761533-4 761533-7 760384 760384-1 760384-2 760384-3 760384-4 2 Flange Assembly (set of 5) 761554 761554-1 761554-2 761554-3 761554-6 761535 761535-1 761535-2 761535-3 761535-4 3 Blade Assemb
