ページ1に含まれる内容の要旨
ATD-30336
36” DIRECT DRIVE DRUM FAN
INSTRUCTIONS
Blade
Item No. Voltage / Hz Current (A)
Diameter
ATD-30336 36”/914.4mm 120V /60Hz 2.1
READ AND SAVE THESE INSTRUCTIONS
Failure to properly follow these instructio ns may lead to injury or bodily harm.
ページ2に含まれる内容の要旨
California Prop 65 WARNING: This product contains chemicals including lead, known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash hands after handling. General Safety Warnings: WARNING: The instructions and warnings contained in this manual should be read and understood before using or operating this fan. Do not allow anyone to use or operate this fan until they have read this manual and have developed a thorough understanding of how this f
ページ3に含まれる内容の要旨
WARNING: Never use the cord for carrying, pulling or unplugging the fan. Grasp plug and pull to disconnect from outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. WARNING: Ensure the switch is in the off position before plugging the fan into the power outlet. In the event of a power failure while the fan is being used, turn the switch off to prevent surprise starting when the power is restored. WARNING: Always remove the power cord
ページ4に含まれる内容の要旨
Wheels Assembly Instructions: 1. Slide the two wheels (1) with wheel shaft (2) into the wheel shaft on the support (3). 2. Tighten the screws (4) to firm the wheel shaft (2). Operating Instructions: 1. Place the fan on a safe, flat surface where it cannot fall or be pulled by the cord. 2. Plug unit into electrical outlet. 3. Switch to Low or High speed for respective air velocity. 4. Always turn off and unplug fan after using.
ページ5に含まれる内容の要旨
ATD-30336 ITEM# ORDERING PART# PART DESCRIPTION PRT30336-01 FRONT GUARD 1 PRT30336-02 BLADE 2 PRT30336-03 SUPPORT POLE 3 PRT30336-04 MOTOR 4 PRT30336-05 DRUM BODY 5 PRT30336-06 REAR GUARD 6 PRT30336-07 BRACKET 7 PRT30336-08 WHEEL 8 Please contact jay@supertestusa.com for parts and service issues Made in China to ATD Tools, Visit us at www.atdtools.com
