Trane 18-HD64D1-1の取扱説明書

デバイスTrane 18-HD64D1-1の取扱説明書

デバイス: Trane 18-HD64D1-1
カテゴリ: サーモスタット
メーカー: Trane
サイズ: 3.04 MB
追加した日付: 2/25/2014
ページ数: 20
説明書を印刷

ダウンロード

使い方は?

私たちの目的は、皆様方にデバイスTrane 18-HD64D1-1の取扱説明書に含まれたコンテンツを可能な限り早く提供することです。オンラインプレビューを使用すると、Trane 18-HD64D1-1に関してあなたが抱えている問題に対する解決策の内容が素早く表示されます。

便宜上

説明書Trane 18-HD64D1-1をこちらのサイトで閲覧するのに不都合がある場合は、2つの解決策があります:

  • フルスクリーン表示 – 説明書を(お使いのコンピュータにダウンロードすることなく)便利に表示させるには、フルスクリーン表示モードをご使用ください。説明書Trane 18-HD64D1-1のフルスクリーン表示を起動するには、全画面表示ボタンを押してください。
  • コンピュータにダウンロード - Trane 18-HD64D1-1の説明書をお使いのコンピュータにダウンロードし、ご自身のコレクションに加えることもできます。デバイス上のスペースを無駄にしたくない場合は、いつでもManualsBaseサイトでダウンロードすることもできます。
Trane 18-HD64D1-1 取扱説明書 - Online PDF
Advertisement
« Page 1 of 20 »
Advertisement
印刷版

多くの人々は画面表示ではなく印刷された説明書を読むほうを好みます。説明書を印刷するオプションも提供されており、上記のリンクをクリックすることによりそれを利用できます - 説明書を印刷。説明書Trane 18-HD64D1-1を全部印刷する必要はなく、選択したページだけを印刷できます。紙を節約しましょう。

要旨

次のページにある説明書Trane 18-HD64D1-1の内容のプレビューは、以下にあります。次のページにある説明書の内容をすぐに表示したい場合は、こちらをご利用ください。

内容要旨
ページ1に含まれる内容の要旨

18-HD64D1-1

ComfortLink II Installation Guide
Other Installation Guides may be necessary, based on system configuration.
A complete list of other optional components is shown below.
1 Thermostat
Relay Panel
2
For use with 24V indoor systems (optional)
Zone Panel (optional)
3
Zone Sensor with Display (optional)
4
Zone Sensor (optional)
5
6 Zone Dampers (optional)
TZONE950AC52ZA
ALL phases of this installation must comply with NATIONAL, STATE AND LOCAL CODES
IMPORTANT — This Document is custome

ページ2に含まれる内容の要旨

Section 2. General Information 2.1 Overview The ComfortLink II Thermostat is a Communicating 7-inch color touch screen that provides an easy-to- use interface to the end user. The thermostat is a communicating wall mounted control that allows a user to control an HVAC and zoning system. With the addition of the 24VAC Relay Panel, con- ventional HVAC systems can also be controlled and zoned. 2.2 Contents in Box The following parts are included in product model TZONE950AC52ZA: 1 - Thermostat

ページ3に含まれる内容の要旨

2.4 ComfortLink II System Connections Communicating System Thermostat Indoor Unit Outdoor Unit TZONE950AC52ZA Wired Remote Sensor* ZZSENSAL0400AA Wired Remote Outdoor Sensor* BAYSEN01ATEMPA *Optional 24V System Relay Panel Thermostat Relay Panel Indoor Unit BAY24VRPAC52DA TZONE950AC52ZA Wired Remote Sensor* ZZSENSAL0400AA Outdoor Unit Wired Remote Outdoor Sensor BAYSEN01ATEMPA 18-HD64D1-1 3

ページ4に含まれる内容の要旨

Communicating System Thermostat Indoor Unit Outdoor Unit TZONE950AC52ZA Wired Remote Sensor* ZZSENSAL0400AA Wired Remote Outdoor Sensor* BAYSEN01ATEMPA 2.4 ComfortLink II System Connections (Continued) 24V System Relay Panel Thermostat Relay Panel Indoor Unit BAY24VRPAC52DA TZONE950AC52ZA Wired Remote Sensor* ZZSENSAL0400AA Outdoor Unit Wired Remote Outdoor Sensor BAYSEN01ATEMPA *Optional 4 18-HD64D1-1

ページ5に含まれる内容の要旨

Section 3. Physical Installation Temperature Sensing Considerations 1A The thermostat sensor is designed for installation in climate controlled living spaces. It is recom- YES NO mended to place the sensor in central locations with good circulation. Avoid exterior walls and ar- NO eas near windows, doors, vents or concealed pipes 5 FEET or chimneys. [1.5 METERS] Wireless Reception Considerations 1B If enabling wireless, choose a mounting location that ensures adequate signal strength.

ページ6に含まれる内容の要旨

Mounting Sub-Base to Wall 3 Be sure wires are routed through the center of the base plate and are long enough to connect to ter- minals. Select and mark three holes. NOTE: The three hole locations indicated at right are recommended. The top location is an optional mounting screw location. Optional Hole A level may be used to ensure professional appear- ance. Three (3) Recommended Screw Locations 4A Mounting to Studs Attach base to wall using 3 screws provided. The locations indicated p

ページ7に含まれる内容の要旨

B Section 4. Wiring ! WARNING ▲ ▲ ! CAUTION LIVE ELECTRICAL COMPONENTS! CAUTION: EQUIPMENT DAMAGE HAZARD - Improper wiring can lead During installation, testing, servicing, and troubleshooting of this prod- to equipment damage. Follow the terminal connection information care- uct, it may be necessary to work with live electrical components. Failure fully to ensure the control is wired properly. After wires are secure, bare to follow all electrical safety precautions when exposed to live elect

ページ8に含まれる内容の要旨

Field Wiring 8 Communicating System Communicating Outdoor Unit Thermostat Communicating Indoor Unit Brown D R Brown D Brown BK Red R Y1 B Blue Y2 G Blue W1 W2 W3 Blue B O Communicating Indoor with Non-Communicating Outdoor 24V Single Stage Cooling Thermostat Communicating Indoor Unit D R D Brown BK Yellow R Red Y1 Yellow B Y2 Blue G W1 W2 Blue W3 Blue B O 24V System D R B *See Relay Panel Indoor Unit Thermostat Installer’s Guide for specific wiring instructions. Relay Panel D Brown Relay Panel

ページ9に含まれる内容の要旨

Section 5. Installer Setup 9 Power-Up Communicating Equipment Discovery mode begins when the thermostat is first installed and power is connected. For communicating equip- ment, the thermostat automatically configures standard equipment parameters. 24V Equipment (Using a Relay Panel) Equipment will need to be configured manually through the Installer’s Setup menu in the thermostat. See the following section for more details. 10 Basic Navigation The home screen displays default temperature s

ページ10に含まれる内容の要旨

11 Installer Setup Menu Enter the Installer’s Setup screen by navigating to: Home screen --> Menu --> Service --> Technician Access --> Proceed* --> Installer Setup *NOTE: Press and hold the “Technician Access” button for 5 seconds to enter the Installer Setup screen. NOTE: See Section 8 for a complete list of menus and parameters that can be set in the Installer Setup menus. 10 18-HD64D1-1

ページ11に含まれる内容の要旨

11A Installer Setup Menu - Standard Standard Pressing the “Standard” button allows manual selec- tion and configuration of basic equipment compo- nents. NOTE: In communicating system, components will be discovered automatically so this manual setup is not required. Example: The “Standard” screens allows selection of non- communicating equipment. 11B Installer Setup Menu - Advanced Advanced Equipment settings may be adjusted to alter the default settings to fine-tune a system’s operation. Ins

ページ12に含まれる内容の要旨

11C Installer Setup Menu - Restore Equipment Defaults CAUTION: “Restore Equipment Defaults” returns the thermostat to factory settings. ALL settings and data will be lost. 11D Installer Setup Menu - Reset Advanced Settings “Reset Advanced Settings” resets the Advanced Settings which were configured in the Installer Menu (settings such as system lockouts, accessories, air flow and comfort options). 12 Wireless Networking NOTE: See the thermostat’s User’s Guide for wire- less setup infor

ページ13に含まれる内容の要旨

Section 6. Advanced Features Feature Description The 1-Touch Presets allows for an immediate change to the setpoint status. Set the desired temper- 1-Touch Presets ature for the three status modes (Home, Away & Sleep). The thermostat will remain in the selected mode until another mode is selected or the program reaches a new schedule period. Aggressive Recovery: This option disables the 10 minute inhibit anytime the thermostat sees more than a 2° change (such as moving from one program

ページ14に含まれる内容の要旨

Feature Description The cycle rate affects the cycle time of the system. With a 50% load value, a cycle rate of 3 will allow the system to run for 10 minutes and be off for 10 minutes; completing 3 cycles in one hour. A cycle rate of 5 would allow the system to cycle on and off at 6 minute intervals. The higher the cycle rate, the more often the system turns on and off. Cycle Rate The actual amount of time the system will be “on” or “off” will be reflective in the load value of the ho

ページ15に含まれる内容の要旨

Feature Description The History Screen provides system cycle information. Cycle counts and run time can be viewed History Screen for first stage and second stage compressor operation, W1 & W2 heating and defrost cycles. This information can be viewed in a 24 hour, 1 week or 2 week period. There are two options available for humidification: • Indoor RH setpoint—this controls the humidifier based on the desired indoor humidity setpoint (options from 10%–45%). • Frost Control setpoint-

ページ16に含まれる内容の要旨

Feature Description The History Runtime screen provides information on system run time in comparison to the indoor Runtime History and outdoor temperatures (average indoor along with the high & low outdoor temps). This history can be viewed on a weekly or monthly basis. Allows for 7 day programming with one to six scheduled time periods per day. There are two options available for setting a schedule: • Guided Setup – a step by step interactive process for setting up a schedule. Sche

ページ17に含まれる内容の要旨

Section 7. Troubleshooting Symptom Possible Causes Action Thermostat displays an alert Alert Code is present. Refer to the Alert Code Addendum. Check the code on the screen. Alert icons in the diagnostic screen. Display will not come on Loss of 24VAC between R & B at the thermo- 1) Check wiring between R & B to see if R & D, or stat. B & D have been reversed. 2) Check transformer for 24VAC output. 3) Check for broken or shorted thermostat wire. Indoor temperature display is Indoor temperature

ページ18に含まれる内容の要旨

Section 8. Installer Setup Parameters* *Each Bold heading below corresponds to a menu in the Installer Setup. All possible options are shown for the menu and each submenu. Selections shown in any particular system will be dependent on system type and configuration. Standard Outdoor Unit Type None Cooling Only Heat Pump Outdoor Unit Stages 1 2 Single Compressor Two Compressor Compressor Type Two Stage Two Stage Indoor Unit Type Electric Gas/Oil Hydronic Indoor Unit Heat Stages None 1 2 3

ページ19に含まれる内容の要旨

Warm Air Discharge Disable Enable Airflow VS Blower On Delay - Cooling No Delay 1 Minute @ 50%, 7.5 Minutes @ 80% 1 Minute @ 50%, 4 Minutes @ 80% 7.5 Minutes @ 80% 4 Minutes @ 80% 1 Minute @ 50% 30 Seconds @ 35% VS Blower Off Delay - Cooling No Delay 1.5 Minutes @ 100% 45 Seconds @ 100% 30 Seconds @ 50% 1.5 Minutes @ 50% 3 Minutes @ 50% 30 seconds @ 35% VS Blower On Delay - Compressor Heating No Delay 1 Minute @ 50%, 7.5 Minutes @ 80% 1 Minute @ 50%, 4 Minutes @ 80% 7.5

ページ20に含まれる内容の要旨

6200 Troup Highway The manufacturer has a policy of continuous product and product data improve- ment and it reserves the right to change design and specifications without notice. Tyler, TX 75707 © 2011 Trane Representative-only illustrations included in this document.


類似の説明書
# 取扱説明書 カテゴリ ダウンロード
1 Trane 340 取扱説明書 サーモスタット 111
2 Trane 350 取扱説明書 サーモスタット 28
3 Trane TAYSTAT 540 取扱説明書 サーモスタット 27
4 Trane CT30 取扱説明書 サーモスタット 23
5 Trane LS-90 取扱説明書 サーモスタット 14
6 Trane DELUXE programable XT302C 取扱説明書 サーモスタット 64
7 Trane RT-SVX19A-E4 取扱説明書 サーモスタット 27
8 Trane CA8900 取扱説明書 サーモスタット 2
9 Trane 18-HD64D1-1 取扱説明書 サーモスタット 23
10 Trane TCONT900AC43UA 取扱説明書 サーモスタット 64
11 Trane taystat 570 取扱説明書 サーモスタット 30
12 Trane BAS-SVP10A-EN 取扱説明書 サーモスタット 10
13 Trane Building Automation System 取扱説明書 サーモスタット 14
14 Trane BMTK-SVN01D-EN 取扱説明書 サーモスタット 3
15 Trane CT30 取扱説明書 サーモスタット 8
16 Edelbrock 2116 取扱説明書 サーモスタット 0
17 A&D MF-50 取扱説明書 サーモスタット 8
18 A&D ML-50 取扱説明書 サーモスタット 8
19 A&D MS-70 取扱説明書 サーモスタット 15
20 Acu-Rite D1523 取扱説明書 サーモスタット 2