ページ1に含まれる内容の要旨
TCSNAC01,TCSNHP01
Non--ProgrammableThermostat
InstallationInstructions
Models
There are 2 different models. The 5th and 6th letters of the part
number indicate the model. These 2 letters also appear on the
package and on the circuit board. Be sure to have the proper
thermostatfortheintended application.Modelsare:
AC -- 1--stagecool,1--stageheatforAC systemsonly.
HP -- 1--stage cool, 2--stage heat for either HP, or AC with 2--stage
heat.
Use each only for its intended purpose. See Table 1.
INSTAL
ページ2に含まれる内容の要旨
Table1–ModelSelectionandWiringDiagramChart AIRCONDITIONER HEATPUMP OUTDOORUNIT 1Speed 1Speed 1---StageFurnace ModelAC See Fig. --- 2---StageFurnace ModelAC See Fig. ModelHP See Fig. --- Typical Fan Coil ModelAC See Fig. ModelHP See Fig. ModelHP See Fig. Variable---Speed Fan Coil (FK4D, ModelAC See Fig. ModelHP See Fig. ModelHP See Fig. FV4, 40FK) InstallThermostat ! CAUTION ! WARNING ELECTRICALOPERATIONHAZARD Failure to follow this caution may result in equipment damage ELECTRICALOPERATIONHAZARD
ページ3に含まれる内容の要旨
OPTION03 -- FAHRENHEIT/CELSIUSSELECTION Toentertheconfigurationmode: This option selects Fahrenheit or Celsius operation. To enter Configuration Mode, hold the FAN button down for approximately 15 seconds. After the 15 second period, Option ToSelect: “01” will appear in the display and the SERVICE icon will be 1. Enterconfiguration mode(ifnotalready there). turned on. 2. Use up and down buttons to display Option 03. The SET NOTE: If the FAN button is pressed again or if no button is icon should
ページ4に含まれる内容の要旨
3. PressMODE button once.TheSET icon willcomeon.The 3. PressMODE button once.TheSET icon willcomeon.The display now showsOption 07 setting. display now showsOption 15 setting. 4. Use up and down buttons to move between available 4. Use up and down buttons to move between available Option 07 choices of ON or OF. Factory default is OF. Option 15 choices of ON or OF. Factory default is ON. 5. Press MODE button again to return to Option 07. The SET 5. Press MODE button again to return to Option 15.
ページ5に含まれる内容の要旨
ToSelect: 2. Pressing the FAN button while the heating or cooling equipment is not running will turn on the FAN relay and 1. Enterconfiguration mode(ifnotalready there). display theFAN icon. 2. Use up and down buttons to display Option 21. The SET 3. If the mode is set to COOL, the first stage of cooling turns icon should beoff. on for three, then first and second stages (if a second stage 3. PressMODE button once.TheSET icon willcomeon.The exists) will turn on for three minutes. display now sho
ページ6に含まれる内容の要旨
Thermostat Fan Coil Heat Pump Thermostat Fan Coil Air Conditioner O/B O Heat WW W Heat WW W Cool YY Y Fan GG Cool YY Y RR R Fan GG 24VAC 24VAC RR R * Common CC C * Common CC C A08163 A08164 *Common connection notrequired ifbatteriesareused. *Common connection notrequired ifbatteriesareused. Fig.3 -- HPThermostatwithFanCoil Fig.4 -- ACThermostatwithFanCoil WIRINGDIAGRAMNOTES: 1. Furnace must control its own second--stage heat operation via furnace control algorithm. Refer to indoor equipment Inst
ページ7に含まれる内容の要旨
OPERATIONALINFORMATION Five--minuteCompressorTimeguard Thecycletimerlimitsthenumberoftimestheheating orcooling equipmentcan beenergized in onehour.Ifoption 1 issettoavalueof1or 2, the equipment will be allowed to energize up to six times per hour. If option 1 s setto 3 or greater,then theequipment willbe allowed to energize up to four times per hour. This timer is defeated for 1 cycle when the desired temperature is manually changed. It can also be defeated for1 cycleby simultaneously pressing t
ページ8に含まれる内容の要旨
Copyright 2008 CarrierCorp. S 7310 W. MorrisSt. S Indianapolis, IN 46231 Printed inChina EditionDate: 03/08 Catalog No: TCSNAC---01SI Manufacturer reserves therighttochange,atanytime,specifications anddesigns withoutnoticeandwithoutobligations. Replaces:NEW 8 TCSN
ページ9に含まれる内容の要旨
TCSNAC01,TCSNHP01 Non--ProgrammableThermostat Homeowner’sGuide RoomTemperatureDisplay showscurrentroom temperature. COOLONIndicator isdisplayed when thecooling equipmentisoperating. HEATONIndicator isdisplayed when theheating equipmentisoperating. RESETFILTERButton restarts the timer that calculates the next air filter change or cleaning. AUXILIARYHEATIndicator is displayed when a heat pump system is operating with auxiliary heat air filter. SETTING&OPERATINGTHETHERMOSTAT Settingyourindoortemper
ページ10に含まれる内容の要旨
NOTE: If 2 dashes (----) appear, your thermostat does not include NOTE: This indicator does not reflect a problem with your the outdoor temperature function or the function is not working system. properly.Check with yourdealerifyou areunsure. Youhaveasystemerrormessage... Servicefilterfeature Thetemperaturesensorfailureindicatorsendsa“----”reading tothe LCD display. This means your thermostat’s temperature sensor is Your thermostat reminds you when it’s time to change or clean yourfilter by disp
