ページ1に含まれる内容の要旨
Instruction Manual
Thermometer
models 00416 / 00417 / 00418 / 00420
CONTENTS
Unpacking Instructions ........... 2 Placement Guidelines ............. 6
Package Contents .................. 2 Using the Thermometer ........... 7
Product Registration ............... 2 Troubleshooting ..................... 8
Features & Benefits ................. 3 Care & Maintenance .............. 9
Setup .................................... 4 Specifications ......................... 9
Install or Replace Batteries....
ページ2に含まれる内容の要旨
Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference. Unpacking Instructions Remove the protective film that is applied to the LCD screen prior to using this product. Locate the tab and peel off to remove. Package Contents 1. Display unit 2. Outdoor sensor 3. Instruction Manual PRODUCT MUST BE REGISTERED IMPORTANT TO RECEIVE WARRANTY SERVICE PRODUCT REGISTRATION Register o
ページ3に含まれる内容の要旨
Features & Benefits 11 12 1 2 7 3 8 4 13 5 9 10 6 9. MAX/MIN Button DISPLAY UNIT Press to view high/low temperature records. 1. Sensor Low Battery Indicator 10. + Button 2. Current Outdoor Temperature For setup preferences. 3. Clock Displays time in either 12 hour or 24 hour formats. OUTDOOR SENSOR 4. Current Indoor Temperature 11. Integrated Hanger For easy placement. O O 5. F/ C Button Press to select degrees Fahrenheit or 12. Wireless Signal Indicator degrees Celsius. Fl
ページ4に含まれる内容の要旨
SETUP Install or Replace Batteries AcuRite recommends high quality alkaline batteries for the best product performance. Heavy duty or rechargeable batteries are not recommended. The outdoor sensor requires lithium batteries in low temperature conditions. Cold temperatures can cause alkaline batteries to function improperly. Use lithium batteries in the outdoor sensor for temperatures below -4ºF / -20ºC. Outdoor Sensor 1. Slide of f the battery compartment cover. 2. Inser t 2 x AA batteries
ページ5に含まれる内容の要旨
Clock Setup Press and hold the “SET” button for 3 seconds to enter SET MODE. Once in set mode, the preference you are currently setting will blink on the display. To adjust the currently selected (flashing) preference item, press the “+” button (press and HOLD to fast adjust). To save your adjustments, press and release the “SET” button again to adjust the next preference. The preference set order is as follows: CLOCK HOUR MODE (12 hour or 24 hour) CLOCK HOUR CLOCK MINUTE You will automat
ページ6に含まれる内容の要旨
Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display unit and outdoor sensor are critical to the accuracy and performance of this product. Display Unit Placement Place the display unit in a dry area free of dirt and dust. Display unit stands upright for tabletop use or is wall-mountable. Outdoor Sensor Placement Sensor must be placed outside to observe outdoor conditions. Sensor is water resistant and is de
ページ7に含まれる内容の要旨
OPERATION Using the Thermometer High/Low Records Press the “MAX/MIN” button to view minimum and maximum outdoor and in- door temperature records. The temperature records are automatically cleared daily at midnight. To view the MAXIMUM recorded outdoor and indoor temperature readings, press and release the “MAX/MIN” button. The “MAX” icon appears on the display. To manually clear the MAXIMUM recorded values, press and hold the “MAX/ MIN” button while in the MAX view mode. Dashes display to c
ページ8に含まれる内容の要旨
Troubleshooting If the wireless signal indicator shows no bars: • R elocate the display unit and/or the outdoor sensor. The units must be within 165 ft (50 m) of each other. • Mak e sure both units are placed at least 3 feet (.9 m) away from electronics that may interfere with the No outdoor sensor wireless communication (such as TVs, microwaves, reception computers, etc). no bars • Use st andard alkaline batteries (or lithium batteries in sensor when temperature is below -4ºF/-20ºC). Do
ページ9に含まれる内容の要旨
Care & Maintenance Display Unit Care Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air. Outdoor Sensor Care Clean with a soft damp cloth. Do not use caustic cleaners or abrasives. Specifications TEMPERATURE RANGE Outdoor: -40ºF to 158ºF; -40ºC to 70ºC Indoor: 32ºF to 122ºF; 0ºC to 50ºC 165 ft / 50 m depending on home construction materials WIRELESS RANGE WIRELESS FREQUENCY
ページ10に含まれる内容の要旨
Customer Support AcuRite customer support is committed to providing you with best-in- class service. For assistance, please have the model number of this product available and contact us in any of the following ways: (877) 221-1252 info@chaney-inst.com 24/7 support at www.AcuRite.com ► Installation Videos ► Register your Product ► Instruction Manuals ► Support User Forum ► Replacement Parts ► Submit Feedback & Ideas PRODUCT MUST BE REGISTERED IMPORTANT TO RECEIVE WARRANTY SERVICE PRODUCT REGI
ページ11に含まれる内容の要旨
11
ページ12に含まれる内容の要旨
Weather Temperature Weather Kitchen Clocks Stations & Humidity Alert Radio Thermometers & Timers It’s more than accurate, it’s AcuRite offers an extensive assortment of precision instruments, designed to provide you with information you can depend on to Plan your day with confidence . ™ www.AcuRite.com ©2012 Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and copyrights are the property
