ページ1に含まれる内容の要旨
Model H8095
1500 LB
Steel ATV Jack
Operation
Pump Handle (Figure 1): To raise the jack, rotate
Failure to follow these instructions could
the pump handle clockwise completely, then move
result in serious personal injury or death:
the pump handle up and down. To lower the jack,
slowly rotate the pump handle counterclockwise.
1. DO NOT overload this jack beyond its
rated capacity. Overloading can cause
Lock Release Pedal (Figure 1): This jack fea-
the jack to collapse and drop the load.
tur
ページ2に含まれる内容の要旨
Maintenance Bleeding the Air Keep the hydraulic rams clean and free of any If the jack becomes spongy or will not rise when dust, dirt, or foreign debris. Abrasive material pumped, then air bubbles may be in the hydraulic stuck to the ram can damage the hydraulic seal system. when the ram is retracted back into the jack. Regularly wipe the hydraulic rams clean with a To remove the air bubbles: lightly oiled rag. 1. Remove the fill plug. The Model H8095 will require hydraulic fluid after long
ページ3に含まれる内容の要旨
H8095 Parts Breakdown and List �� �� �� �� �� �� �� �� �� �� �� �� � �� �� �� �� � �� �� �� �� �� �� �� �� �� �� �� � � �� �� � �� �� �� �� � �� � � �� �� � �� � �� �� � �� �� � �� �� � � � � � REF PART # DESCRIPTION REF PART # DESCRIPTION 1 PR06M EXT RETAINING RING 16MM 21 PH8095021 REAR CASTER 2 PW08M FLAT WASHER 16MM 22 PH8095022 FLANGE BOLT M10-1.5 X 20 3 PH8095003 FRONT WHEEL 23 PR01M EXT RETAINING RING 10MM 4 PH8095004 BASE ASSEMBLY 24 PR09M EXT RETAINING RING 20MM 5 PH8095005 PLASTIC END
ページ4に含まれる内容の要旨
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � ������ ���� �������� ������ ���� ��������� � ���� ������� � ��� ���� ��������� ������� � � ������� �������� � � ������� �������� ������� ��� ����� � � ����������������������� �������� � � � � ����� ������ � ���� � ���� ����� ������ �������
