ページ1に含まれる内容の要旨
INSTRUCTIONS–PARTS LIST 308–845
Rev. C
This manual contains important
warnings and information.
First choice when
READ AND KEEP FOR REFERENCE.
quality counts.
INSTRUCTIONS
ACETAL HUSKY 307, WALL-MOUNT PUMP, DRUM SUCTION
PRO/ Delta Spray Packages
Metal fluid fittings and hose couplings are stainless steel.
100 psi (0.7 MPa, 7 bar) Maximum Fluid Working Pressure
100 psi (0.7 MPa, 7 bar) Maximum Air Inlet Pressure
Packages with Fluid Pressure Regulators
Model No. 240–349
with hoses and Delta Sp
ページ2に含まれる内容の要旨
Instruction Manual – Parts List Changes This page contains a summary of changes or additions that do not appear in the contents of the manual. 308845 1A
ページ3に含まれる内容の要旨
Notes 308845 1B
ページ4に含まれる内容の要旨
Table of Contents Symbols Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warning Symbol Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 WARNING WARNING Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Parts List and Parts Drawing This symbol alerts you to the possibility of serious 240–349 to 240–353 . . . . . . . . . . . . . . . . . .
ページ5に含まれる内容の要旨
WARNING EQUIPMENT MISUSE HAZARD Equipment misuse can cause the equipment to rupture, malfunction, or start unexpectedly and result INSTRUCTIONS in a serious injury. This equipment is for professional use only. Read all the instruction manuals, tags, and labels before operating the equipment. Use the equipment only for its intended purpose. If you are uncertain about usage, call your Graco distributor. Do not alter or modify this equipment. Use only genuine Graco parts and accessories.
ページ6に含まれる内容の要旨
Setup Preparing the Operator CAUTION Anybody who operates this system should be trained This equipment is compatible with most water-based in the safe, efficient operation of all system materials. See the wetted parts in the Technical components. At a minimum, all operators should Data section and your fluid and solvent thoroughly read the safety, setup, and operation manufacturer’s compatibility information. sections of this manual. Do not use acid catalyzed materials; they are incom- Preparin
ページ7に含まれる内容の要旨
Setup Assembling the Wall-Mount Unit Grounding See Fig. 1 Install the wall bracket (G) 5 ft (1.5 m) above the floor. WARNING For proper hole dimensions, use the Wall Mounting To reduce the risk of static sparking, the entire Hole Layout on page 15. Be sure the wall is strong system must be grounded. Check your local enough to support the weight of the pump and hoses, electrical code for detailed grounding instructions any accessories, the fluid, and stress caused by pump for your area and type
ページ8に含まれる内容の要旨
Operation 3. Slowly open the gun air regulator (F), and pull the Using the Gun gun trigger just enough to open only the air valve See the gun instruction manual for gun operation, in the gun. With the gun air triggered, set the gun care, flushing, cleaning, and technical data. Read the air pressure to 60 psi (413 kPa, 4 bar). entire gun manual before operating the sprayer. NOTE: Gun air pressure higher than 60 psi (413 Pressure Relief Procedure kPa, 4 bar) will cause excessive overspray and l
ページ9に含まれる内容の要旨
Operation Priming the System See Fig. 1 1. Close the gun air regulator (F). 5. Slowly open the gun air regulator (F), and pull the gun trigger just enough to open only the air valve 2. If your system has a fluid pressure regulator (G), in the gun. With the gun air triggered, set the gun close it. air pressure to 60 psi (413 kPa, 4 bar). 6. Hold the gun against and aimed into a grounded 3. Open the bleed-type master air valve (K). metal waste pail, and fully trigger the gun. If your system ha
ページ10に含まれる内容の要旨
Operation 4. Make sure the air regulators (E and F) are closed. When to Shut Down the System NOTE: The gun air regulator (F) always stays Shut down the system at the end of the work shift and closed during flushing. before checking, adjusting, cleaning, or repairing the system. Always relieve the pressure. 5. Open the bleed-type master air valve (K). 6. Slowly open the pump air regulator (E) until the WARNING pump starts. To reduce the risk of serious injury whenever you 7. Hold the gun against
ページ11に含まれる内容の要旨
Maintenance See the separate component instruction manuals for individual component maintenance procedures. Access to some system components requires that you remove the shields. The following steps are for shield removal. Shield replacement is the reverse of these steps, so make sure you take notes on the proper hose connections. Depending on your system, see the Parts Drawings on pages 11 and 13 for number call-outs. Front Shield Assembly (1) Back Shield (25) 1. Disconnect the pump air hose
ページ12に含まれる内容の要旨
Parts List Wall-Mount Packages with Fluid Pressure Regulators Model No. 240–349, Delta Spray air spray package Model No. 240–350, Delta Spray HVLP package Model No. 240–351, no hoses (31) or gun (30) Model No. 240–352, PRO 3500sc electrostatic package Model No. 240–353, PRO 4500sc electrostatic package Ref. Ref. No. Part No. Description Qty. No. Part No. Description Qty. 1 240–210 SHIELD ASSY, front 30 239–542 GUN, Delta Spray, air spray Contains 1a to 1h, shown in Fig. 2 on Model 240–349 p
ページ13に含まれる内容の要旨
Parts Drawing Grounding Detail Wall-Mount Packages with Fluid Pressure Regulators Model No. 240–349, Delta Spray air spray package 26 Model No. 240–350, Delta Spray HVLP package 37 Model No. 240–351, no hoses (31) or gun (30) Model No. 240–352, PRO 3500sc electrostatic package Model No. 240–353, PRO 4500sc electrostatic package 19 20 32 39 50 16 28 3 2 27 8 29 7 25 1 24 21 16 34 15 40 27 10 15 9 33 13 9 17 24 5 11 6 12 30 30 222–300 shown 38 31 31
ページ14に含まれる内容の要旨
Parts List Wall-Mount Packages with Surge Tanks Model No. 240–361, Delta Spray air spray package Model No. 240–362, Delta Spray HVLP package Model No. 240–363, no hoses (31) or gun (30) Ref. Ref. No. Part No. Description Qty. No. Part No. Description Qty. 1 240–210 SHIELD ASSY, front 25 192–996 SHIELD, back 1 Contains 1a to 1h, shown in Fig. 2 on 26 104–029 LUG, grounding 1 page 9 1 27 054–139 TUBE; Nylon 11.5 in. 3 106–285 BOLT, “U” 2 29 189–220 LABEL, warning 1 5 104–123 WASHER, spring loc
ページ15に含まれる内容の要旨
Parts Drawing Grounding Detail Wall-Mount Packages with Surge Tanks Model No. 240–361, Delta Spray air spray package 26 Model No. 240–362, Delta Spray HVLP package 37 Model No. 240–363, no hoses (31) or gun (30) 19 20 3 7 50 32 16 40 27 29 8 25 16 1 24 21 34 15 40 27 10 15 9 33 13 9 17 24 5 11 6 12 30 38 31
ページ16に含まれる内容の要旨
Accessory Fluid Filter Kit Fluid Filter Kit 240–440 Ref. To avoid sharp bends in the tube, you may have to cut it to a shorter length. No. Part No. Description Qty. Apply Graco Thread Sealer, or Loctite 567, or equiv- 101 114–361 FILTER, fluid 1 alent to male threads. 102 113–322 CONNECTOR, male 1 For initial installation, make sure the dome is firmly 103 054–188 TUBE; PTFE;3/8” O.D. 8 in. hand tightened onto the filter body. Do not use a 104 113–534 ELBOW, male x female 2 tool. Durin
ページ17に含まれる内容の要旨
Technical Data Category Data Maximum fluid working pressure 100 psi (0.7 MPa, 7 bar) Maximum incoming air pressure 100 psi (0.7 MPa, 7 bar) Maximum operating temperature 120 F (49 C) Gun See separate gun instruction manual. Pump See separate pump instruction manual. Fluid pressure regulator See separate fluid pressure regulator instruction manual. Air pressure regulators See separate air pressure regulator instruction manual. Wetted parts: fluid hoses for Delta guns nylon, stainless steel Wet
ページ18に含まれる内容の要旨
Graco Standard Warranty Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale by an authorized Graco distributor to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective. This warranty applies only wh
