ページ1に含まれる内容の要旨
OWNER’S MANUAL
Model GTT354
Mfg. ID No. 96072001000
Product No. 960 72 00-10
54 Inch Mower
Grass Catcher
Assembly
Operation
Customer Responsibilities
Repair Parts
532402349 11.17.05 rad
Printed in U.S.A.
03021
ページ2に含まれる内容の要旨
SAFETY RULES Safe Operation Practices for Ride-On Mowers IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROW ING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. Data indicates that operators, age 60 years and above, are involved in a large percentage of riding mower-re- WARNING: In order to prevent ac- lated injuries. These operators should evaluate their ci den tal starting when setting up, abilit
ページ3に含まれる内容の要旨
SAFETY RULES Safe Operation Practices for Ride-On Mowers IV. TOWING If you strike a foreign object, stop and inspect the machine. Repair, if necessary, before restarting. Tow only with a machine that has a hitch designed for Never make any adjustments or repairs with the engine towing. Do not attach towed equipment except at the running. hitch point. Check grass catcher components and the discharge Follow the manufacturer's recommendation for weight guard frequent
ページ4に含まれる内容の要旨
KNOW YOUR GRASS CATCHER READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE ASSEMBLING OR OPERATING YOUR GRASS CATCH ER. Compare the illustrations with the carton contents to familiarize yourself with the parts before starting the assembly. Study the operating instructions and safety precautions thoroughly to insure proper functioning of your Grass Catcher and to prevent injury to yourself and others. Save this manual for future reference. The operation of any tractor can result in foreign obje
ページ5に含まれる内容の要旨
02051 02544 02543 ASSEMBLY 1. Slide fl anges of support assembly into drawbar slots INSTALL HIGH LIFT BAGGING BLADES fi rst, then, pivot backwards inserting pin into drawbar 1 (See Fig. 1) pin hole. 2. Be sure support assembly is seated properly, then CAUTION: Blades are sharp. Protect secure with retainer spring. your hands with gloves and/or wrap blade with heavy cloth. SUPPORT ASSEMBLY NOTE: If you already have high lift bagging blades on your mower, store the supplied blades in a sa
ページ6に含まれる内容の要旨
03022 CONTAINER MOUNTING (See Fig. 5) CONTAINER ASSEMBLY (See Fig. 4) 5 4 1. Install one container to left side fi rst with warning to 1. Place bottom half inside of top half, as shown. outside of unit. Install another container to center 2. Place one foot inside bottom half and lift top half to position and one in right position. meet bottom half. NOTE: Right con tain er should always over lap left con tain er 3. Press halves tightly together while lifting top to lock at center s
ページ7に含まれる内容の要旨
02783 UPPER CHUTE (See Figs. 7A & 7B) LOWER CHUTE (See Fig. 6) 6 7 1. Raise and hold defl ector shield in upright position. 1. Lower mower to its lowest cutting position. 2. Place slot in lower chute over tab on mower and position 2. Assemble upper chute by inserting curved end into lower chute over mower opening as shown. hole in back of cover. 3. Hook rear latch into fl ange hole on back of mower. NOTE: Handle carefully so as not to damage full bagger indicator. 4. Hook front
ページ8に含まれる内容の要旨
OPERATION Avoid cutting wet grass or in the morning while the dew TIPS FOR IMPROVED BAGGING is still heavy. Grass clippings collected under these OPE RATION: conditions tend to be sticky and adhere to the walls of Follow the mower operation instructions in your tractor the fl ow path causing clogging. owner's manual. Your bagger is equipped with a full bagger indicator. Movement of the wheel increases as the bags fi ll. The When operating your grass catcher on a lawn where grass
ページ9に含まれる内容の要旨
CUSTOMER RESPONSIBILITIES STORAGE GENERAL RECOMMENDATIONS When grass catcher is to be stored for a period of time, Always observe safety rules when performing any main- clean it thoroughly, remove all dirt, grass, leaves, etc. Store te nance. in a clean, dry place. Before each use check for loose fasteners. Clean unit thoroughly after each use. CAUTION: Do not leave grass in bagger containers. Empty containers after each BLADE CARE use and before storing. Failure to do so may
ページ10に含まれる内容の要旨
cracked or damaged. Use only a recommended replacement container. subject to wear and detierioration. Check bag frequently. Replace when Do not operate mower unless container is properlyis nstalled.Container is WARNING 10 REPAIR PARTS GRASS CATCHER - MODEL GTT354 (MFG. ID 96072001000) / RAMASSE-HERBE - MODÈLE GTT354 (MFG ID 96072001000) PRODUCT NUMBER 960 72 00-10 / NO. DE PRODUIT 960 72 00-10 4 5 6 7 8 10 12 9 2 13 9 11 14 2 18 20 38 15 16 38 20 34 15 9 20 12 37 14 3 16 20 33 26 32 35 31 33 27
ページ11に含まれる内容の要旨
11 REPAIR PARTS GRASS CATCHER - MODEL GTT354 (MFG. ID 96072001000) / RAMASSE-HERBE - MODÈLE GTT354 (MFG ID 96072001000) PRODUCT NUMBER 960 72 00-10 / NO. DE PRODUIT 960 72 00-10 KEY PART DESCRIPTION KEY PART DESCRIPTION NO. NO. NO. NO. 18 532187300 Chute, Lower Glissière inférieure 2 532069180 Nut, Crownlock #10-24 Écrou auto-serrant #10-24 20 871161010 Screw #10-2
