Brother XL5070NTCの取扱説明書

ページ1に含まれる内容の要旨

Winding the bobbin. (Your machine may be supplied with a fully wound
Step 3 bobbin, but you may want to fill another bobbin with your own thread.)
figure 3a
GETTING STARTED:
• Set the power switch to on (I).
XL series Sewing Machines
Place a spool of thread on the spool pin (figure 3a).
tension
XL5050NTC XL5060NTC XL5070NTC
Unwind some thread and pass the thread around the
disk
tension disk.
To help you get started, please follow these simple instructions in the order shown below.
However, befo

ページ2に含まれる内容の要旨

Step 6 continued Upper threading. figure 6e figure 6f Step 5 • Hook the thread around the needle threader and across the front of the needle, just below the hook figure 5a (figure 6e). • Make sure the power switch is set to off (O). thread tension disk guide • Holding the thread loosely with your right hand, rotate Important: Raise the presser foot by pushing the the needle threader, so that the hook comes back out presser foot lever upwards. of the eye and the threader springs back upwards. tak