ページ1に含まれる内容の要旨
DUAL DIN SIZED CD RECEIVER
DPX-MP6110U
INSTRUCTION MANUAL
© B64-4231-00/00 (MW)
ページ2に含まれる内容の要旨
Contents Before use 3 TV control (Optional) 21 Basic Operation Basic Operation 4 Preset Memory General functions Preset Tuning Tuner functions Direct TV Tuning Disc & Audio file play functions Basic Operations of remote control 22 Function Control 6 Appendix 23 Display Settings 8 Accessories/ Installation Procedure 26 About Display Type Text Display Selection Connecting Wires to Terminals 27 Illumination Color Selection Illumination Color Preset Memory Installation/Removing the Unit 28 Illumina
ページ3に含まれる内容の要旨
Before use • If you experience problems during installation, 2WARNING consult your Kenwood dealer. To prevent injury or fire, take the following • When you purchase optional accessories, check with precautions: your Kenwood dealer to make sure that they work • To prevent a short circuit, never put or leave any with your model and in your area. metallic objects (such as coins or metal tools) inside • Characters that conform to GB2312 or ISO 8859-1 the unit. can be displayed. Refer to “MENU
ページ4に含まれる内容の要旨
Basic Operation [ ] Disc slot [SRC] [FNC] [AUTO] Control knob [1]—[6] USB Terminal Auxiliary input [AUD] [ATT] Muting volume upon reception of phone call General functions When there is a call, “CALL” is displayed and the audio Power/Source Select button : [SRC] system is paused. Turns on the power. When the call ends, “CALL” disappears and the audio When the power is ON, select a source. system comes back on. SRC Select mode 1: Press the [SRC] button and then The audio system comes back on
ページ5に含まれる内容の要旨
Text/Title scroll : Control knob Pause and play : Control knob Scrolls the CD and audio file text display when Switches between pause and play each time the pushing toward up for at least 2 seconds. center is pressed. USB device removing : [0] Tuner functions Press this button for 2 seconds or longer to select the Band select : Control knob remove mode, and the remove the USB device. Switches between FM1, FM2, and FM3 each time During the remove mode, the “USB REMOVE” pushing toward up. indi
ページ6に含まれる内容の要旨
Function Control Functions in the table below can be set up by using Function Control. Category Item Setting Entry Setting overview Condition Page Sets/Resets security code MENU “Security Set”/ 1 sec. 15 “Security Clear” Sets the source selection method. “SRC Select” “1”*/ “2” 24 “iPod Mode” “OFF”/ “ON”* When set to “ON”, allows you to select music in the manner 12 similar to that of the iPod. When the iPod source is used, sets whether the illumination “AT COL CHG” “OFF”/ “iPod”* 24 color i
ページ7に含まれる内容の要旨
Category Item Setting Entry Setting overview Condition Page Sets the sound quality. “S-CTRL” “EQ” 18 “POSIT” Compensates the sound environment in accordance with 18/19 the listening position. Compensates high and low pitch sound at lower volume. “LOUD” “OFF”*/ “ON” “PRESET” Presets the setting value of the audio control. The preset 19 value is retained after resetting. Sets the display pattern. DISP “TYPE” A/ B/ C/ D —8 Spectrum Analyzer 1 – 2 Sets the Type D spectrum analyzer display. Î “GRAPH
ページ8に含まれる内容の要旨
Display Settings Function Control 1 Enter Function Control mode About Display Type Press the [FNC] button. Shown below are examples of display types. Function icon is displayed. Display Display Type 2 Select your desired setup item “TYPE [A]” 3 1 Operation type Operation Movement between items Turn the Control knob. Selection of item Press the Control knob. “TYPE [B]” 2 Return to previous item Press the [FNC] button or “ ” icon. 3 1 Repeat selection and determination until your “TYPE [C]” desi
ページ9に含まれる内容の要旨
In Audio file source Illumination Color Selection Information Display Selecting the Illumination Color of the panel. Music title & Artist name “Title/Artist”/”TITLE” Album name & Artist name “Album/Artist”/”ALBUM” 1 Enter Illumination Color Selection mode Folder name “Folder Name”/”FOLDER” Select “Color” . File name “File Name”/”FILE” For how to select Function Control item, refer to Play time & Music number “P-Time”/”P-TIME” (page 6). Spectrum Analyzer & Clock “Speana/Clock”
ページ10に含まれる内容の要旨
Display Settings Illumination Color Preset Memory Auxiliary Input Display Setting Saving the combination of the Illumination Colors Selects the display below when changing to selected for each place. The memory cannot be Auxiliary input source. erased by the Reset button. 1 Select Auxiliary input display setting item 1 Set the Illumination Color for each place during Menu mode (In AUX mode) Refer to (page 9). Select the “Name Set” display. For how to select Fun
ページ11に含まれる内容の要旨
Station/Disc Naming (SNPS/DNPS) Opening message edit Attaching a title to a Station or CD. Setting the opening message to be displayed when the power is turned on. 1 Receive/play the station/disc you want to attach a title to 1 Select Opening message edit item during Menu mode 2 Select Name set mode item during Menu Select “OPENING MSGE Edit”. mode For how to select Function Control items, refer to Select the “Name Set” display. (page 6). For how to select Function Contro
ページ12に含まれる内容の要旨
Music disc/Audio file Operation Function of Audio file/ Internal CD source Function of remote control Music Select Direct Music Search Selecting the music you want to listen to from the Searchs the music by entering the track number. device or media being played now. 1 Enter the music number 1 Enter Music Select mode Press the number buttons on the remote Turn the Control knob. control. The music list is displayed. 2 Search the music 2 Search for music Press the [4] or [¢] button. Select the ca
ページ13に含まれる内容の要旨
Basic Operation of Disc Changer (Optional) Selecting CD changer source Press the [SRC] button. Select the “CD Changer” display. For how to select source item, refer to of (page 4). Music search Push the Control knob towards right or left. Disc Search Push the Control knob towards up or down. Playing the Current Song or Disc Repeatedly. (Repeat play) Press the [4] button. Pressing the button repeatedly selects Track Repeat play on (“Track Repeat
ページ14に含まれる内容の要旨
Tuner Operation Function of remote control Station Preset Memory Direct Access Tuning Putting a station in the memory. Entering the frequency and tuning. 1 Select the frequency to put in the memory Push the Control knob towards right or left. 1 Enter Direct Access Tuning mode Press the [DIRECT] button on the remote 2 Enter Preset Memory mode control. Select “P.MEM” . “– – – –” is displayed. For how to select Function Control item, refer to (page 6). 2 Enter the frequency Pre
ページ15に含まれる内容の要旨
Other Functions Activating Security Code Deactivating Security Code To deactivate the Security Code function. ⁄ • You can set the Security Code with a 4 digit number of your 1 Select Security Code item during Menu choice. mode (In Standby mode) • The Security Code cannot be displayed or referenced. Make Select the “Security Clear” display. a note of the Security Code and treasure it up. For how to select Function Control items, refer to 1 Select Security Code item during Menu
ページ16に含まれる内容の要旨
Other Functions Manual Clock Adjustment Demonstration mode setting Turning the demonstration mode ON/OFF. 1 Select Clock Adjustment item during Menu mode 1 Select Demonstration item during Menu mode Select the “Clock Adjust” display. Select the “DEMO Mode” display. For how to select Function Control items, refer to For how to select Function Control items, refer to (page 6). (page 6). 2 Enter Clock adjustment mode 2 Set the Demonstration mode Press the Co
ページ17に含まれる内容の要旨
Audio Adjustments Cabin selection 2 Select the speaker you want to set Setting speaker Display You can compensate the delay of the sound arrival Front speaker “DTA-Front” time, which is caused by the installation position of Rear speaker “DTA-Rear" the speakers, by selecting your environment from Subwoofer “DTA-Sub" the following car types; Turn the Control knob and push the center Car type (rear speaker position) Display when the desired item is displayed. Not compensating. “OFF” Compact ca
ページ18に含まれる内容の要旨
Audio Adjustments Equalizer Control ⁄ • When you set the Bass Extend to ON, low frequency You can adjust following Equalizer Control items ; response is extended by 20%. Adjustment Item Display Range 1 Select the Basic Audio item System Q “Preset EQ” “NATURAL” (Natural)/ “USER” Select the desired item to be set in detail from (User setting)/ “ROCK” (Rock)/ followings; “POPS” (Pops)/ “EASY” (Easy)/ • Bass level “TOP40” (Top 40)/ “JAZZ” (Jazz)/ ”GAME” (Game) • Middle level Bass level* “Bass”
ページ19に含まれる内容の要旨
Manual position setting 3 Put the Audio Preset in the memory Press the Control knob. Making fine adjustment of the value specified at “Memory?” is displayed. Preset position selection per speaker. 4 Turn the Control knob to select “YES”, and then 1 Enter Position setting mode press the Control knob. Select “SOUND” > “S-CTRL” > “POSIT” > “Memory Completed” is displayed. “M-POSI”. 5 Exit Audio Preset mode For how to select Function Control item, refer to Press the [FNC] button.
ページ20に含まれる内容の要旨
Audio Adjustments Audio Control Audio Setup You can adjust following Audio Control items ; You can set Sound system , such as follows; Adjustment Item Display Range Adjustment Item Display Range Rear volume “REAR VOLUME” 0 — 35 Volume offset “VOL-OFFSET” –8 — ±0 (AUX: -8— +8) Balance “BALANCE” Left 15 — Right 15 Dual Zone System “2 ZONE” OFF/ON Fader “FADER” Rear 15 — Front 15 ⁄ Exit Audio Control mode (Volume control mode) • Volume offset: Sets each source’s volume as a difference from the b
