ページ1に含まれる内容の要旨
CD RECEIVER KD-AR370/KD-G320
RECEPTOR CON CD KD-AR370/KD-G320
RECEPTEUR CD KD-AR370/KD-G320
For canceling the display demonstration, see page 7.
Para cancelar la demostración en pantalla, consulte la página 7.
Pour annuler la démonstration des affichages, référez-vous à la page 7.
For installation and connections, refer to the separate manual.
For customer Use:
Para la instalación y las conexiones, refiérase al manual separado.
Enter below the Model
Pour l’installation et les raccordements,
ページ2に含まれる内容の要旨
Thank you for purchasing a JVC product. INFORMATION (For U.S.A.) Please read all instructions carefully This equipment has been tested and found before operation, to ensure your complete to comply with the limits for a Class B digital understanding and to obtain the best possible device, pursuant to Part 15 of the FCC performance from the unit. Rules. These limits are designed to provide reasonable protection against harmful How to reset your unit interference in a residential installat
ページ3に含まれる内容の要旨
How to read this manual CONTENTS • Button operations are mainly explained with the illustrations in the table below. • Some related tips and notes are explained in Control panel — KD-AR370 and KD-G320 ....... 4 “More about this unit” (see pages 20 – 22). Remote controller — RM-RK50 .............. 5 Getting started ................................. 6 Press briefly. Basic operations .................................................... 6 Radio operations .............................. 7 Press re
ページ4に含まれる内容の要旨
Control panel — KD-G612/KD-G611/KD-G511 Control panel — KD-AR370 and KD-G320 Parts identification Display window 1 4 /¢ buttons Display window 2 (standby/on attenuator) button a Disc information indicators—TAG (ID3 3 5 (up) / ∞ (down) buttons Tag), (folder), (track/file) 4 Loading slot s Disc type indicators—WMA, MP3 5 Display window d Playback source indicators— 6 0 (eject) button CH: Lights up only when CD-CH is 7 EQ (equalizer) button selected as the playback source. 8 Remote sensor D
ページ5に含まれる内容の要旨
Main elements and features Remote controller — RM-RK50 Installing the lithium coin battery (CR2025) 1 (standby/on/attenuator) button Aim the remote controller directly at the • Turns the power on if pressed briefly or remote sensor on the unit. Make sure there is attenuates the sound when the power is no obstacle in between. on. • Turns the power off if pressed and held. 2 5 U (up) / D (down) ∞ buttons Warning: • Changes the FM/AM bands with 5 U. • Do not install any battery other tha
ページ6に含まれる内容の要旨
4 SOUND button ! • Selects the sound mode (C-EQ: custom equalizer). 5 SOURCE button • Selects the source. • For FM/AM tuner 6 2 R (reverse) / F (forward) 3 buttons • Searches for stations if pressed briefly. • Fast-forwards or reverses the track if • For SIRIUS radio pressed and held. • Changes the tracks if pressed briefly. • While listening to the satellite radio: – Changes the channels if pressed briefly. • For XM radio – Changes the channels rapidly if pressed and held. • While
ページ7に含まれる内容の要旨
! Start searching for a station. Basic settings • See also “General settings — PSM” on pages 12 – 14. 1 When a station is received, searching stops. To stop searching, press the same button 2 again. To tune in to a station manually In step ! above... 1 Canceling the display 1 demonstrations Select “DEMO,” then “DEMO OFF.” 2 Setting the clock Select “CLOCK H” (hour), then adjust the hour. Select “CLOCK M” (minute), then adjust the minute. 2 Select a desired station frequency. 3 Fi
ページ8に含まれる内容の要旨
Storing stations in memory Listening to a preset station You can preset six stations for each band. 1 FM station automatic presetting — 2 Select the preset station (1 – 6) you SSM (Strong-station Sequential want. Memory) 1 Select the FM band (FM1 – FM3) you want to store into. or 2 3 To check the other information while “SSM” flashes, then disappears when listening to an FM or AM station automatic presetting is over. Clock Ô Frequency Local FM stations with the strongest signals are
ページ9に含まれる内容の要旨
To fast-forward or reverse the track Playing discs in the CD changer All discs in the magazine will be played repeatedly until you change the source. • Ejecting the magazine will also stop playing. To go to the next or previous tracks ~ * If you have changed the external input setting to “EXT IN” (see page 14), you cannot select the CD changer. To go to the next or previous folders (only for MP3 or WMA discs) Ÿ Select a disc. For disc number from 01 – 06: For MP3 discs: For WMA discs:
ページ10に含まれる内容の要旨
Other main functions Changing the display information Skipping tracks quickly during play While playing an audio CD or a CD Text Only possible on JVC MP3-compatible CD changer • For MP3 or WMA discs, you can skip tracks within the same folder. 2 * While playing an MP3 or a WMA disc Ex.: To select track 32 while playing a track whose number is a single digit (1 to 9) • When “TAG DISP” is set to “TAG ON” (see page 14) 1 2 • When “TAG DISP” is set to “TAG OFF” Each time you press the butt
ページ11に含まれる内容の要旨
Selecting the playback modes Sound adjustments You can use only one of the following playback You can select a preset sound mode suitable to modes at a time. the music genre (C-EQ: custom equalizer). 1 2 Select your desired playback mode. 7 Repeat play Ex.: When “ROCK” is selected Mode Plays repeatedly Preset values BAS TRE LOUD TRK RPT : The current track. (bass) (treble) (loudness) Indication (For) 1 FLDR RPT* : All tracks of the current USER folder. 00 00 OFF 2 (Flat sound) DISC RPT* :
ページ12に含まれる内容の要旨
2 General settings — PSM You can change PSM (Preferred Setting Mode) items (except “SID”) listed in the table that follows. Indication [Range] 1 1 BAS* (bass) Adjust the bass. [–06 to +06] 1 TRE* (treble) 2 Select a PSM item. Adjust the treble. [–06 to +06] 2 FAD* (fader) Adjust the front and rear speaker balance. [R06 to F06] 3 BAL* (balance) Adjust the left and right speaker balance. [L06 to R06] Ex.: When “DIMMER” is selected 1 LOUD* (loudness) Boost low and high frequencies to produce
ページ13に含まれる内容の要旨
Indications Selectable settings, [reference page] DEMO DEMO ON : [Initial]; Display demonstration will be activated Display automatically if no operation is done for about 20 seconds, demonstration [7]. DEMO OFF : Cancels. CLOCK H 1 – 12, [7] Hour adjustment [Initial: 1 (1:00)] CLOCK M 00 – 59, [7] Minute adjustment [Initial: 00 (1:00)] 1 CLK ADJ* AUTO : [Initial]; The built-in clock is automatically adjusted using Clock adjustment the clock data provided via the satellite radio channel.
ページ14に含まれる内容の要旨
Indications Selectable settings, [reference page] 1 WOOFER* LOW : Frequencies lower than 90 Hz are sent to the subwoofer. Subwoofer cutoff MID : [Initial]; Frequencies lower than 135 Hz are sent to the frequency subwoofer. HIGH : Frequencies lower than 180 Hz are sent to the subwoofer. 2 EXT IN* CHANGER : [Initial]; To use a JVC CD changer, [9], a JVC compatible External input satellite (SIRIUS/XM) tuner, [15], an Apple iPod or a JVC D. player, [18]. EXT IN : To use any other external
ページ15に含まれる内容の要旨
Activate your SIRIUS subscription after Satellite radio operations connection: 1 This unit is satellite (SAT) Radio Ready— compatible with both SIRIUS Satellite radio and XM Satellite radio. 2 Before operating your satellite radio: • For connection, see Installation/Connection JVC DLP starts updating all the SIRIUS Manual (separate volume). channels. • Refer also to the Instructions supplied with your SIRIUS Satellite radio or XM Satellite Once completed, JVC DLP tunes in to the radi
ページ16に含まれる内容の要旨
4 Contact XM Satellite radio on Listening to the XM Satellite radio the internet at to activate your 1 subscription, or you can call 1-800- XM-RADIO (1-800-967-2346). Once completed, the unit tunes in to one 2 of the available channels (Channel 4 or higher). 3 Select a channel for listening. Listening to the SIRIUS Satellite radio 1 Holding the button changes the channels rapidly. 2 Searching for category/channel 3 Select a category. You can search fo
ページ17に含まれる内容の要旨
2 Select a channel for listening. Storing channels in memory You can preset six channels for each band. Ex.: Storing a channel into preset number 4. Current channel number 1 Tune in to a channel you want. 2 Ex.: When you select “COUNTRY” for Category Search If no operation is done for about Preset number flashes for a while. 15 seconds, Category Search is canceled. In Channel Search, channel name and channel number appear on the display Listening to a preset channel during search. 1 Select e
ページ18に含まれる内容の要旨
⁄ Adjust the sound as you want. (See iPod®/D. player operations pages 11 and 12.) • Make sure the equalizer on the iPod or This unit is ready for operating an Apple iPod D. player is deactivated. or a JVC D. player from the control panel. Before operating your iPod or D. player: 1 Connect either one of the following (separately To pause* or 2 purchased) to the CD changer jack on the rear stop* playback of this unit. To resume • Interface adapter for iPod —KS-PD100 for ® playback, press
ページ19に含まれる内容の要旨
3 Confirm the selection. 7 Random play To move back to the previous menu, press 5. 4 ALBM RND* Functions the same as “Shuffle Albums” of • If a track is selected, playback starts the iPod. automatically. SONG RND/RND ON • If the selected item has another layer, you Functions the same as “Shuffle Songs” of the will enter the layer. Repeat steps 2 and 3 iPod or “Random Play On” of the D. player. until the desired track is played. • Holding 4 /¢ can skip 10 RND OFF items at a time. Cancels
ページ20に含まれる内容の要旨
Other external component More about this unit operations Basic operations You can connect an external component to Turning on the power the CD changer jack on the rear using the Line • By pressing SRC on the unit, you can also Input Adapter—KS-U57 (not supplied) or AUX turn on the power. If the source is ready, Input Adapter—KS-U58 (not supplied). playback also starts. • For connection, see Installation/Connection Manual (separate volume). Turning off the power • If you turn off the power
