ページ1に含まれる内容の要旨
Operating Instructions
DCD-PRO310 MKII
Professional Dual CD Player
6122 S. Eastern Ave.
Los Angeles, Ca. 90040
www.americandj.com
6/09
ページ2に含まれる内容の要旨
CONTENTS CAUTIONS REGARDING HANDLING.................................................................................................3 PRODUCT INFORMATION......................................................................................................................5 CUSTOMER SUPPORT .........................................................................................................................6 SET-UP......................................................................
ページ3に含まれる内容の要旨
ELECTRICAL SAFETY PRECAUTIONS CAUTION: TO PREVENT ELECTRIC SHOCK NOTE: This CD player uses a semiconductor DO NOT USE THIS (POLARIZED) PLUG wITH laser. It is recommended for use in a room at AN EXTENSION CORD, RECEPTACLE, OR the following temperature: 41˚F - 95˚F / 5˚C - OTHER OUTLET UNLESS THE BLADES CAN 35˚C BE CAREFULLy INSERTED TO PREVENT BLADE EXPOSURE CAUTION: 1. Handle the power supply cord carefully. Do ATTENTION: POUR PREVENIR LES CHOCS not damage or deform; it may cause e
ページ4に含まれる内容の要旨
ELECTRICAL SAFETY PRECAUTIONS ELECTRICAL PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an The exclamation point within an equilateral triangle is CAUTION: TO REDUCE THE RISK OF ELECTRIC equilateral triangle, is intended to alert the user to the SHOCK, DO NOT REMOVE THE COVER (OR BACK). intended to alert the user to the presence of important presence of uninsulated "dangerous voltage" within the THERE ARE NO USER SERVICEABLE PARTS opera
ページ5に含まれる内容の要旨
PRODUCT INFORMATION I. Heat - The CD player should be situated This unit has been thoroughly tested and has away from heat sources such as radia- been shipped in perfect operating condition. tors, heat registers, stoves, or other appli- Carefully check the shipping carton for damage ances (including amplifiers) that produce that may have occurred during shipping. If heat. the carton appears to be damaged, carefully inspect your unit for any damage. Be sure all 2
ページ6に含まれる内容の要旨
CUSTOMER SUPPORT Customer Support: American Audio® provides a toll free customer support line, to provide set up help and to answer any question should you encounter problems during your set up or initial operation. you may also visit us on the web at www.americanaudio.us for any comments or suggestions. For service related issue please contact American Audio®. Service Hours are Monday through Friday 9:00 a.m. to 5:00 p.m. Pacific Standard Time. Voice: (800) 322-6337 Fax: (323) 582-2
ページ7に含まれる内容の要旨
MAIN FEATURES • 8 Times Over Sampling 1 Bit D/A Converter • Jog Wheel Pitch Bend (b) • 60 Second Transport Protection (a) • Single or Continuous Play • 10+ Track Skipping • Selectable Time Display • Pitch Display • Auto Cue • Reads CD and CD-R Media • Flip Flop™ (Relay Playback) (c) • Repeat in Single Mode • Pitch Control and Bend • 4 Speed Search (+/-4%, +/-8%, or +/-16%) (a) 60 SECOND TRANSPORT PROTECTION: The CD transport tray will automatically close if left open for more
ページ8に含まれる内容の要旨
GENERAL FUNCTIONS AND CONTROLS - REMOTE UNIT 1 2 3 4 5 6 7 8 Figure 3 19 18 17 16 15 14 13 12 11 10 9 Figure 4 20 REmOTE CONTROL - f ACE (fIgURE 3) 1. JOG WHEEL - The jog wheel serves two functions depending on the current operating mode: A. The jog wheel will act as a slow frame search control when the unit is in pause or cue mode allowing you to set a specific cue point or find a particular starting point. B. The inner wheel also works as a momentary pitch bend during playback. Turn
ページ9に含まれる内容の要旨
GENERAL FUNCTIONS AND CONTROLS - REMOTE UNIT (CONT) the other in this way, the beats can be matched. 4. LOOP IN BUTTON - “CUE ON THE FLy” - This function allows you to set a CUE POINT (see CUE POINT page 17) without music interruption (“on the fly”). This button also sets the starting point of a loop (see LOOP). 5. REPEAT BUTTON - when the player is in SINGLE mode and this button is pushed the song will repeat until the button is pressed again. The Red LED above the button will glow when
ページ10に含まれる内容の要旨
GENERAL FUNCTIONS AND CONTROLS - REMOTE UNIT CONT. speed (Beats per minute - BPM) when the PITCH (13) function is activated. This functions allows the beats between two CD’s or any other music source to match. This is a momentary function. when the button is depressed the pitch speed will automatically return to PITCH SLIDER'S (3) selected pitch. Holding down this button will give a maximum of +16% pitch. Be sure to remember that this func- tion is a momentary pitch adjustment, for a more pr
ページ11に含まれる内容の要旨
GENERAL FUNCTIONS AND CONTROLS - PLAYER UNIT Figure 5 21 22 23 24 25 Figure 6 30 29 28 27 26 PLAYER UNIT - FACE (FIGURE 5) 21. DRIVE 1 TRANSPORT TRAy - This tray is used to load and unload a compact disc into the drive 1 mechanism. The tray is opened and closed by pressing the DRIVE 1 OPEN/CLOSE BUTTON (22). Never attempt to force the transport tray open or closed when the power is turned off. 22. DRIVE 1 OPEN/CLOSE (Transport Tray Open/Close) - This button is used to open and close the dr
ページ12に含まれる内容の要旨
GENERAL FUNCTIONS AND CONTROLS - PLAYER UNIT power cord. Use of any other power may result in sever damage to the unit. Be sure the local power matches the unit’s required power. 29. VOLTAgE SELECTOR - Because power supplies vary from location to location a voltage selec- tor switch has been incorporated in the unit's design. This switch can select a voltage input of 115v or 230v to accommodate the two major power source. Always be sure to disconnect the power plug before changing the volta
ページ13に含まれる内容の要旨
LIqUID CRYSTAL DISPLAY (LCD) 31 32 33 Figure 7 39 38 37 36 35 34 LCD DISPLAY (FIGURE 7) 31. TImE bAR INDICATOR - This bar visually details the time defined in the TIME METER (36, 37, & 38). As with the TIME METER (36, 37, & 38), this bar is also dependent on the selected time function REMAIN (35) ELAPSED, OR TOTAL REMAIN (34). This bar will begin to flash when 15 seconds of a track remain and will begin to rapidly flash when three seconds of a track remain. The flashing bar is a great visu
ページ14に含まれる内容の要旨
BASIC OPERATIONS 5 in. / 12cm disc 1. OPENINg AND CLOSINg THE DISC TRAy/LOADINg DISCS This is an electronic operation and can only work when the power is on. Press the OPEN/CLOSE BUTTON (19) to open or close the disc tray. Pressing the PLAy/PAUSE BUTTON (3), will also automatically close the tray if it is open and immediately cue any CD that is in it. If the transport tray is left open for more than 60 seconds it will close automatically to prevent accidental damage to the transport. Again
ページ15に含まれる内容の要旨
BASIC OPERATIONS (CONT) 8. CHANgINg THE TImE DISPLAy (36, 37, & 38)/TImE bAR (39): The time may be displayed in three different modes; Elapsed, Remain, and Total Remain. During normal play- back, pressing the TIME BUTTON (9), will change the time display information (36, 37, & 38) in the LCD (2). The following is a break down of the time settings and their definitions: 1) TOTAL REMAIN (34) - This details the time in the LCD (30, 29, & 28) as the current cds’ total remaining time.
ページ16に含まれる内容の要旨
BASIC OPERATIONS (CONT) 10. PITCH END: b This function will momentarily increase or decrease a tracks playback speed. There are two ways to operate this function with the (-) & (+) PITCH BUTTONS (14) or with the JOG wHEEL (1) . The maximum pitch bend percentage allowed is +/- 16%. The pitch bend function will work in conjunction with the PITCH SLIDER (3) pitch setting. PITCH END b UTTONS b (14): The (+) PITCH BEND BUTTON (14) will provide a speed bump and the (-) PITCH BEND BUTTON (14) will
ページ17に含まれる内容の要旨
BASIC OPERATIONS (CONT) 13. CREATING AND PLAYING A LOOP A loop is a sound loop that plays continuously. you can use this loop to create dramatic effect in your mixing. This loop has no time limit and you could actually loop the entire length of disc. 1) Press PLAy/PAUSE BUTTON (17) to activate playback mode. Figure 16 2) Press the IN BUTTON (4). This will set the start- ing point of the SEAMLESS LOOP (figure 17). The IN BUTTON LED will blink. Figure 17 3) Press the OUT BUTTON (11) to set t
ページ18に含まれる内容の要旨
"FLIP-FLOP' (RELAY) CONNECTION AND SET UP 12. RELAY (FLIP-FLOP™) This feature is a kind of “auto pilot." “Flip-Flop™” mode can only function with the both drives of the DCD-PRO310 MKII. with “Flip-Flop™” you can have one disc drive begin playback when the other ends. you can “Flip Flop™” single tracks, or entire discs. 1) Load disc drives with audio discs. 2) Press the RELAy BUTTON (12), the LED above the RELAy BUTTON will light up letting you know that Flip-Flop™ mode has been activate
ページ19に含まれる内容の要旨
BEFORE SWITCHING OFF THE POWER • when you have finished using the CD unit, and before switching off the power, be sure that the disc holder has been closed with the OPEN/CLOSE button. • TRAy PROTECTION: If tray is not closed after 60 seconds, it will close automatically and pause. CAUTION: DO NOT forcibly close the disc holder when the power is off. Do not switch off the power when Switch off the power after the the disc holder is open. disc holder has been closed with the OPEN/CLOSE but
ページ20に含まれる内容の要旨
WARRANTY 1-YEAR LIMITED WARRANTY A. American Audio® hereby warrants, to the original purchaser, American Audio® products to be free of manufacturing defects in material and workmanship for a period of 1 Year (365 days) from the date of purchase. This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable evidence, at the t
