ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Woodstock Technical Support ..................2 Sander Accessories ............................. 26 Machine Overview ................................2 General .......................................... 27 Standard Machinery Safety .....................7 Cleaning ......................................... 27 Additional Safety for Wide Belt Sanders .....9 Lubrication ...................................... 27 Air Regulator/Filter ............................ 28 220
ページ4に含まれる内容の要旨
This machine has been specially designed to provide many years of trouble-free service. Close attention to detail, ruggedly built parts and a rigid quality control program assure safe and reliable operation. Woodstock International, Inc. is committed to customer satisfaction. Our intent with this manual is to include the basic information for safety, setup, operation, maintenance, and service of this product. We stand behind our machines! In the event that questions
ページ5に含まれる内容の要旨
B A C D K E J F I G H Model W1813 features. Sanding Cabinet Motor 3 HP Dust Port 4" Elevation Lock Lever Elevation Handwheel Cabinet Stand Control Panel (refer to on Conveyor for details) & Electrical Box Depth of Cut Safety Bar Air Regulator & Safety Switch Sanding Belt Access Door -3-
ページ6に含まれる内容の要旨
A I H B J C K N G D M E L F Sanding cabinet controls. Control panel identification. Upper Roller Amperage Load Chart Left Oscillation Disc Amperage Load Meter Oscillation Control Valve Power Light Sanding Belt Tension Lock Lever Sanding Motor ON Button Sanding Belt Tension Lever Emergency Stop Button Sanding Drum Conveyor Feed Rate Dial Sanding Belt 19" x 48" Conveyor ON/OFF Switch w/Disabling Key -4-
ページ7に含まれる内容の要旨
Phone #: (360) 734-3482 • Online Tech Support: tech-support@shopfox.biz • Web: www.shopfox.biz Weight .................................................................................................................. 475 lbs. 1 1 Length/Width/Height ..................................................................................42 ⁄2" x 24" x 62 ⁄2" 1 Foot Print (Length/Width) ................................................................................
ページ8に含まれる内容の要旨
Type .................................................................................... Direct Current Variable Speed 1 Horsepower ........................................................................................................ ⁄10 HP Voltage .............................................................................................................220VDC Phase ..................................................................................................
ページ9に含まれる内容の要旨
-7-
ページ10に含まれる内容の要旨
-8-
ページ11に含まれる内容の要旨
Kickback is typically defined as the high-speed expulsion of stock from the machine, which can cause serious personal injury to the operator or bystanders. Forcing or jamming the workpiece into the sander or against the sanding belt can cause it to kickback into the operator. Always use the correct depth of cut, then firmly hold the workp
ページ12に含まれる内容の要旨
The Model W1813 is wired for 220V single-phase opera- NEMA 6-20 plug and receptacle. tion. We recommend connecting this machine to a dedi- cated circuit with a verified ground, using the circuit size given below. Never replace a circuit breaker with one of higher amperage without consulting a qualified electri- cian to ensure compliance with wiring codes. This ma- chine must be connected to a grounded circuit! A plug is not supplied wi
ページ13に含まれる内容の要旨
This machine has been carefully packaged for safe trans- portation. If you notice the machine has been damaged during shipping, please contact your authorized Shop Fox dealer immediately. The following is a description of the main components shipped with the Model W1813. Lay the components out to inventory them. A Sander Assembly ...............
ページ14に含まれる内容の要旨
This machine distributes a The table and other unpainted parts of your heavy load in a small footprint. Some resi- wide belt sander are coated with a waxy grease dential floors may require additional brac- that protects them from corrosion during ship- ing to support both machine and operator. ment. Clean this grease off with a solvent clean- er or citrus-based degreaser. DO NOT use chlo- Consider existing and rine-based solvents such as brake parts cleaner a
ページ15に含まれる内容の要旨
1 Wrench ⁄2" ....................................................... 1 9 Wrench ⁄16" ...................................................... 1 Precision Level .................................................. 1 With assistance, turn the cabinet stand upside down on a protective piece of cardboard. 3 Place ⁄8" flat washers on the mounting feet, then insert them through the
ページ16に含まれる内容の要旨
Lift and move the sander assembly into position over the cabinet stand so that the mounting holes line up (see ). Secure the sander assembly to the cabinet stand with the four M8-1.25 x 25 hex bolts and 8mm flat washers. Open the sanding belt access door on the left side of the machine, and remove the red shipping brace securing the sanding drum to the conveyor assembly (see ). Sander assembly mounting points on left side. Only use a forklift rated for a
ページ17に含まれる内容の要旨
A steady supply of clean, dry air of 57–60 PSI (not to exceed 120 PSI) is required for the operation of the sanding belt oscillation system and pneumatic motor To avoid possible personal injury from brake. Without the correct supply of compressed air, the exploding compressed air components machine will not start. or damage to the sander, never exceed 120 PSI of incoming compressed air to the mill's regulator. Connect the sour
ページ18に含まれる内容の要旨
Once the assembly is complete, test run your machine to make sure it runs properly and is ready for regular opera- tion. The test run consists of verifying the following: 1) The motors power up and run correctly, 2) the emergency stop button safety feature works correctly, 3) the conveyor ON/ OFF switch disabling key works correctly, and 4) the air pressure safety switch operates properly. If, during the test run, you cannot easily locate the source of an
ページ19に含まれる内容の要旨
Reset the emergency stop button, then turn the sanding motor . Turn the conveyor and verify that it operates correctly—it should move from front-to-back. Use the conveyor feed rate dial to vary the speed. Turn the conveyor , then remove the switch dis- abling key, as shown in . Try to turn the conveyor . Removing the switch disabling — If the conveyor does not start, the switch disabling key from the conveyor ON/OFF switch. feature is wor
ページ20に含まれる内容の要旨
This machine will perform many types of operations that are beyond the scope of this manual. Many of these operations can be dangerous or deadly if performed incor- rectly. The instructions in this section are written with the understanding that the operator has the necessary knowl- edge and skills to operate this machine. If you are an inexperienced operator, we strongly recom- mend that you read books, trade art
