ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
Distributors and Head Offices / Vertriebs- und Hauptgeschäftsstelle Distributeurs et sièges sociaux / Distribuidores y Casas matrices FCC INFORMATION If you have any questions, please contact your dealer or one of the following companies. Pour plus de détails sur les produits, veuillez vous adresser à Yamaha ou au distributeur le plus COMPLIANCE INFORMATION STATEMENT proche figurant dans la liste suivante : (DECLARATION OF CONFORMITY PROCEDURE) Bei weiteren Fragen wenden Sie sich Sitte an Ihre
ページ3に含まれる内容の要旨
LASER INFORMATION Laser Diode Properties CAUTION Material: GaAlAs Use of controls or adjustments or performance of Wavelength: 780-787 nm procedures other than those specified herein may result Emission Duration: Continuous in hazardous radiation exposure. Laser Output Power: Less than 44.6 μW* * This output is value measured at a distance 200 ACHTUNG mm from the objective lens surface on the optical Halten Sie sich beim Bedienen und Einstellen der pick-up block. Bedienungselemente sowie be
ページ4に含まれる内容の要旨
OWNER’S MANUAL i English
ページ5に含まれる内容の要旨
SAFETY PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING These precautions explain how to use the device correctly and safely, thereby preventing injury to yourself or to others. This section has been sub-divided into a WARNING section and a CAUTION section, according to the likelihood and nature of any potential injuries or damage inflicted. They relate to your personal safety, and also help you minimize the risk of damaging the device. Please read these sections carefully before proceedin
ページ6に含まれる内容の要旨
CAUTION Always follow the basic precautions listed below to avoid the possibility of physical injury to yourself or others, or damage to the instrument or other property. These precautions include, but are not limited to, the following: Always unplug the computer from the electrical outlet if it will not be used for a prolonged period of time or if there is a risk of lightning. Otherwise, there is an increased risk of electrical shock, short-circuiting or fire. Do not expose the device to excess
ページ7に含まれる内容の要旨
About CD-R/RW discs Please read the following regarding the handling of CD-R/RW discs. 1. Do not expose discs to excessive heat or vibrations or extreme cold or heat (such as in direct sunlight or near a heater). 2. Do not touch disc surfaces. When handling a disc, hold it by its edges. 3. Remove dust and dirt from disc surfaces. Use air-based dust removers. The surfaces may be scratched if wiped with a dry cloth. 4. Do not write or stick labels on disc surfaces except where indicated. 5. Do no
ページ8に含まれる内容の要旨
Table of Contents Setup Flowchart ............................................................................................. 1 Introduction ..................................................................................................... 2 Features of the CRW8824E Drive ...................................................... 2 System Configuration ................................................................................. 3 Computer ...................................................
ページ9に含まれる内容の要旨
Setup Flowchart This flowchart shows the procedure for setting up the CRW8824E drive. For easy cross-referencing, the relevant pages in this manual are also given. Set up the CRW8824E drive STEP 1. Remove the outer casing of computer. (P.10) 2. Set the jumper switches (P.14) 1 3. Fit the drive into the computer (P.15) Check that the CRW8824E STEP drive is recognized correctly 2 Go to Control Panel | System | Device Manager tab. Double-click on CDROM to check that the drive is recognized
ページ10に含まれる内容の要旨
Introduction Features of the CRW8824E Drive High speed CD-R/RW discs can be written/rewritten at up to 8X speed. For example, an audio CD (74 minutes/650 MB) can be created in approximately 10 minutes. Data reading at up to 24X speed is supported. CD TEXT support CD TEXT is a capability that adds text data to an audio CD. Information such as the song name or artist name can be recorded using writing software. The text data on the disc you create can be displayed by a CD player that is compatible
ページ11に含まれる内容の要旨
System Configuration In order to use the CRW8824E drive, your computer system will need to meet the following set of requirements. Computer The minimum system requirements for using the CRW8824E drive are as follows: Any fully PC/AT-compatible computer. A Pentium-class or higher CPU running at 200MHz or faster. OS: Windows 95 (OSR2 or later), Windows 98, Windows 98 SE (Second Edition), Windows NT4.0 with Service Pack 3 or later, or Windows 2000. RAM: 32MB memory, 64MB or more recommended. A 5.25
ページ12に含まれる内容の要旨
System Configuration Discs The CRW8824E can record discs that carry the following logos. CD-R discs • The CRW8824E can write these discs at 8X*, 6X*, 4X, and 1X speeds. • These discs can be played back in a CD-ROM drive or a CD player. * Compatible with “Orange Book Part 2.” * When writing at 8X or 6X speeds, please use “high-speed writing capable” discs. CD-RW discs • There are two types of CD-RW discs: those that support write/rewrite speeds of 4X, 2X and 1X, and those that support only 2X. •
ページ13に含まれる内容の要旨
System Configuration About CD-ROM A CD-ROM disc is a compact disc containing high-density read-only data. It has many applications, including the playback of music and video, the archiving of data, as well as on-line documentation. The following are descriptions of each CD-ROM format: CD-DA: Up to 74 minutes of stereo audio is written in 16-bit resolution at a sampling rate of 44.1kHz (for a 74 minutes disc). Data CD: Up to 650 megabytes of computer data is stored in standard ISO9660 format. V
ページ14に含まれる内容の要旨
Front and Rear of Unit Front Panel The CRW8824E drive’s front panel features the following: Manual Eject hole Only use this if no other method is available for unloading a disc. Disc tray Eject button The tray is used to hold the disc. Press this button when you need It slides out from the drive unit when to unload a disc. Remove the a disc needs to be loaded or unloaded. disc after the tray has opened. Headphone Headphone ON/DISC LED READ/WRITE LED jack volume control This LED is This LED
ページ15に含まれる内容の要旨
Front and Rear of Unit Rear Panel The CRW8824E drive’s rear panel features the following: IDE connector Insert the connector of the IDE cable here. Make sure you align the red line of the ribbon cable with pin 1 of the drive’s connector, marked “IDE INTERFACE CONNECTOR 1.” IDE INTERFACE CONNECTOR CSEL AUDIO OUT SLAVE DC INPUT MASTER + + RL G 1 5V G 12V CSEL AUDIO OUT DC INPUT connector IO OUT SLAVE connector Connect one end Insert the power MASTER G L of the 4-pin audio connector from ca
ページ16に含まれる内容の要旨
Installation This section provides a step-by-step guide for installing the CRW8824E drive. Make sure you have all the necessary tools. First Steps Once you have taken the CRW8824E drive out of its packaging, you should immediately note down the serial number shown on the top of the drive together with a barcode. You may need to refer to this number when requesting User Support services. In the box below the following diagram, write down the 10- character serial number (consisting of 3 letters
ページ17に含まれる内容の要旨
Installation Installing the CRW8824E Drive You can install the CRW8824E drive in one of two ways: As an additional drive If the casing of your computer has a spare 5.25-inch drive bay available, such as with many tower-type designs, you can install the CRW8824E drive in addition to the computer’s existing CD-ROM drive. CRW8824E As a replacement drive If the casing of your computer does not have a spare 5.25-inch drive bay available, such as with many desktop-type designs, you can replace the com
ページ18に含まれる内容の要旨
Installation Connecting the CRW8824E Drive The following steps explain how to install the CRW8824E as a secondary master on the tower computer for expansion or replacement. 1 Power down your computer and unplug it from the AC outlet. If you proceed without doing this, you run the risk of receiving an electric shock and/ or short-circuiting and damaging compo- nents, including the CRW8824E drive. 2 Remove the outer casing of the computer. If you need to remove screws in the process, make sure yo
ページ19に含まれる内容の要旨
Installation 4 Remove the front cover of a vacant 5.25-inch drive bay slot in the computer. When you finish this step, proceed to Step 7 on page 14. Front panel 5.25-inch drive bay slot Front cover 4 Remove the front panel of the computer. Front panel 5.25-inch drive bay slot 11 Replacing Drive Additional Drive
ページ20に含まれる内容の要旨
HOST INTERFACE CABLE SELECT SLAVE ANALOG MASTER AUDIO POWER R GG L 39 1 +5V G +12 40 2 G V Installation 1 About IDE IDE (Enhanced IDE/E-IDE) is one of the standards applied to the connection between personal computers and their peripherals. A computer motherboard provides two IDE connectors (primary and second- ary). (Although, some motherboards provide only a primary connector.) You may connect up to two IDE devices (hard disk, CD-ROM, or CD-R drives) to the connectors using an IDE cable. One
