ページ1に含まれる内容の要旨
A
CDX-993
Natural Sound Compact Disc Player
Thank you for selecting this YAMAHA Compact Disc Player.
OWNER’S MANUAL
FEATURES
CONTENTS
• Random Access Programmable Play Safety Instructions................................................ 2
• Random-Sequence Play Connections ......................................................... 4
• Single Track/Entire Disc Repeat Play Identification of Components................................ 6
• Automatic Spacing Capability Basic Operation...................
ページ2に含まれる内容の要旨
SAFETY INSTRUCTIONS 10 Power Sources – The unit should be connected to a power supply only of the type described in the operating CAUTION instructions or as marked on the unit. RISK OF ELECTRIC SHOCK DO NOT OPEN 11 Power-Cord Protection – Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying CAUTION: TO REDUCE THE RISK OF particular attention to cords at plugs, convenience ELECTRIC SHOCK, DO NOT REMOVE receptacl
ページ3に含まれる内容の要旨
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT 1 To ensure the finest performance, please read this manual 7 Be sure to read the “TROUBLESHOOTING” section on carefully. Keep it in a safe place for future reference. common operating errors before concluding that your unit is faulty. 2 Install your unit in a cool, dry, clean place – away from windows, heat sources, vibration, dust, moisture, or cold. 8 Do not place another component on top of this unit, as To avoid humming sounds, locate the unit a
ページ4に含まれる内容の要旨
CONNECTIONS • Before making any connections, switch OFF the power to the • If the placement of this unit creates interference (noise) in other equipment, such as a tuner, relocate this unit away unit and the amplifier or other components. from the affected equipment. • Connections should be made to the correct input terminals of the amplifier or other components. CDX-993 LINE OUT DIGITAL AUDIO OUT VARIABLE FIXED 1 1 OPTICAL COAXIAL To AC outlet DIGITAL OUT 3 2 Optical fiber cable Connection cord
ページ5に含まれる内容の要旨
To connect this unit to your amplifier, choose one of the following procedures: 1 When the LINE OUT (analog) terminals of 2 When the DIGITAL OUT (OPTICAL) this unit are used terminal(s) of this unit is used • Connect to either the VARIABLE terminals or the FIXED This unit has two DIGITAL OUT (OPTICAL) terminals on terminals. (As a general rule, connect to the FIXED the front panel and the rear panel. terminals.) • Before using the terminal on the rear panel, remove the VARIABLE:The output level
ページ6に含まれる内容の要旨
IDENTIFICATION OF COMPONENTS ( ) indicates the page number on which the control part is best described. FRONT PANEL • The control functions on the front panel and on the remote • (PLAY/PAUSE) button on the front panel has both the control transmitter are virtually identical, with the exceptions functions of the PLAY button and the PAUSE button on the below. remote control transmitter. AUTO DISPLAY OFF indicator (p. 11) Remote control sensor (p. 20) POWER switch (p. 8) Display panel Disc Tray
ページ7に含まれる内容の要旨
REMOTE CONTROL TRANSMITTER DIMMER button (p. 11) TAPE button (p. 15) TIME button (p. 10) SYNCHRO button (p. 19) OPEN/CLOSE button (p. 8) CLEAR button (p. 14) PEAK button (p. 18) OPEN/ SYNCHRO DIMMER TIME CLOSE SPACE PEAK TAPE CLEAR PROG SPACE button (p. 10) PROG (program) button (p. 13) 1 2 3 INDEX INDEX button (p. 14) 4 5 6 +I0 Number buttons (p. 9) 7 8 9 0 REPEAT RANDOM RANDOM button (p. 12) REPEAT button (p. 12) SEARCH SEARCH button (p. 10) –+ OUTPUT LEVEL SKIP OUTPUT LEVEL button (p. 11) SKI
ページ8に含まれる内容の要旨
BASIC OPERATION OPEN/ SYNCHRO DIMMER TIME CLOSE 2, 3 SPACE PEAK TAPE CLEAR PROG 1 1 2 3 INDEX POWER 4 5 6 +I0 7 8 9 0 REPEAT RANDOM SEARCH –+ OUTPUT LEVEL SKIP STOP PAUSE PLAY 4 1 Turn the power on. 3 Close the disc tray. OPEN/ CLOSE POWER 2 Load a disc. Label side up 4 OPEN/ DISPLAY OFF AUTO PLAY POWER CLOSE Play will begin from the first track of the disc. Disc tray Notes Display information during disc play • After closing the disc tray by pressing the OPEN/CLOSE button, the display shows the
ページ9に含まれる内容の要旨
English To stop play temporarily To stop play completely PAUSE STOP To resume play, press the PAUSE button again (or press the PLAY button). * button on the front panel can also be used to stop play temporarily or to resume play. To play a desired track on the disc DIRECT PLAY SKIP PLAY Select a desired track using the number buttons. To skip to a succeeding track, press the SKIP button once or repeatedly until the desired track number appears. 5 SKIP To skip to the beginning of the current trac
ページ10に含まれる内容の要旨
To advance or reverse play rapidly (MANUAL SEARCH) • The sound can be heard (although slightly garbled) during To advance rapidly manual search in either direction. This is convenient for locating a precise position within a track, or for reviewing the contents quickly. SEARCH • Manual search can also be performed while disc play is paused, though no sound will be heard. (Press and hold.) To reverse rapidly SEARCH (Press and hold.) Selecting time displays You can select any of the four time disp
ページ11に含まれる内容の要旨
English Changing the brightness of the display You can change the brightness of the display (or turn off the illumination) by pressing the DIMMER button. During play During stopped or paused Normal illumination Normal illumination DIMMER Dim Dim (Off) Dim (The AUTO DISPLAY OFF indicator lights up. * While the display illumination is off, the AUTO DISPLAY OFF indicator In this state, if a disc is played, the display illumination AUTO DISPLAY OFF on the front panel is illuminated. will be turned o
ページ12に含まれる内容の要旨
RANDOM-SEQUENCE PLAY The unit can play the tracks on a disc in a random sequence selected by the unit’s microcomputer. To perform random-sequence play Notes • This feature will not function during programming, or during programmed play. RANDOM • If the SKIP button is pressed during random-sequence play, the next randomly programmed track will be played. If the SKIP button is pressed, play will return to the beginning of the current track. • This indication appears during random track selection.
ページ13に含まれる内容の要旨
English PROGRAM PLAY By programming tracks, you can enjoy listening to your favorite tracks in any desired order. As many as 40 tracks can be programmed in sequence. OPEN/ SYNCHRO DIMMER TIME CLOSE SPACE PEAK TAPE CLEAR PROG 1 2 3 2 INDEX 4 5 6 +I0 3 7 8 9 0 REPEAT RANDOM SEARCH –+ OUTPUT LEVEL SKIP STOP PAUSE PLAY 1 4 1 Stop the unit. 3 Program a desired track by pressing the corresponding number button. STOP 6 * Repeat this operation to program more tracks. You can select the same track again.
ページ14に含まれる内容の要旨
To stop Program Play To correct program data Press the STOP button. The first programmed track number will 1. Follow the procedure described in “To check program be displayed. data.” To resume play, press the PLAY button. Play will begin from the 2. Display the track number to be corrected by pressing the beginning of the program. SKIP button. 3. Press a number button to select a track to replace the one displayed. The previously programmed track will be cleared To check program data from the me
ページ15に含まれる内容の要旨
English TRACK PROGRAMMING FOR RECORDING TO TAPE The unit can automatically program tracks considering the tape’s total time. This convenient feature can help you to program tracks so that they fit onto the tape with the least amount of unrecorded space remaining at the end of each side (A and B) of the tape. L Automatic tape-programming The unit can automatically program tracks on a disc in their original order. 4 Otherwise, you can enter the tape’s total possible recording time manually. Exampl
ページ16に含まれる内容の要旨
L Manual tape-programming For recording tracks in any desired order onto a tape. 5 Select the track numbers to be recorded on side B in any desired order. 4 1 2 3 OPEN/ SYNCHRO DIMMER TIME CLOSE SPACE PEAK TAPE CLEAR PROG 4 5 6 +I0 1 2 3 INDEX 2 4 5 6 +I0 7 8 9 0 7 8 9 0 3, 5 REPEAT RANDOM SEARCH 7 –+ OUTPUT LEVEL SKIP STOP PAUSE PLAY 6 Begin recording on the tape deck and press the PLAY 6, 7 button on this unit at the same time. 7 The unit will pause at the end of side A of the tape. Turn the t
ページ17に含まれる内容の要旨
English L Automatic Random Program tape recording The unit can automatically program tracks in random order for recording to tape. Notes • Because the programmed data changes every time the OPEN/ SYNCHRO DIMMER TIME CLOSE RANDOM button is pressed, the amount of time remaining at SPACE PEAK TAPE CLEAR PROG the end of the tape also changes accordingly. 1 2 3 INDEX • If the tape’s length is not enough, not all tracks can be 4 5 6 +I0 programmed. In this case, exchange the tape for a longer 7 8 9 0
ページ18に含まれる内容の要旨
Automatic searching for the peak level on a disc This convenient feature automatically finds level peak in the source. It then plays the peak repeatedly for a few moments in order for you to adjust the recording level on the tape deck, before you begin recording. OPEN/ SYNCHRO DIMMER TIME CLOSE 2 SPACE PEAK TAPE CLEAR PROG 1 2 3 INDEX 4 5 6 +I0 7 8 9 0 REPEAT RANDOM SEARCH –+ OUTPUT LEVEL SKIP STOP PAUSE PLAY 1 To cancel this function Press the STOP button. (Some other buttons can also be used 1
ページ19に含まれる内容の要旨
English CD SYNCHRONIZED RECORDING This unit can perform automatic synchronized CD to tape recording. With this function, you can record a CD on tape very easily and more precisely. This recording method requires a YAMAHA tape deck compatible with this function. (Refer to the tape deck’s operation manual to know whether it is compatible or not.) * This unit and the tape deck must be placed near each other so that both can receive the signals from this unit’s remote control transmitter. OPEN/ SYNC
ページ20に含まれる内容の要旨
30° NOTES ABOUT THE REMOTE CONTROL TRANSMITTER Battery installation Remote control transmitter operation range 2 Remote control sensor 1 3 Within approximately 6 m (19.7 feet) Battery replacement If you find that the remote control transmitter must be used closer to the main unit than usual, the batteries are weak. Replace both batteries with new ones. Notes Notes • Use only AA, R6, UM-3 batteries for replacement. • There should be no large obstacles between the remote • Be sure the polarities a
