ページ1に含まれる内容の要旨
0712
ページ2に含まれる内容の要旨
READ ALL INSTRUCTIONS SAFETY RULES BEFORE OPERATING 1. Know your machine. Read this manual carefully. Learn the machine’s applications and SAVE THESE INSTRUCTIONS limitations, as well as specific Thank you for purchasing 7" Polisher. potential hazards peculiar to it. Before attempting to operate your new 2. Ground all machines. This machine Polisher please read these instructions is “Double Insulated,” meaning that thoroughly. You will need these all outside metal parts are insulated instructi
ページ3に含まれる内容の要旨
8. Wear proper apparel. Loose clothing, 20. Use proper accessories. Using gloves, neckties, rings, bracelets, or accessories no recommended may be other jewelry may present a potential hazardous. Be sure accessories are hazard when operating this machine. properly installed and maintained. Do Please keep all apparel clear of the not defeat a guard or othe safety machine. device when installing an accessory or 9. Don’t overreach. Keep proper footing attachment. and balance at all times when 21.
ページ4に含まれる内容の要旨
SERVICE ASSEMBLY 1. Tool service must be performed only 1. Choose the most comfortable position by qualified repair personnel. Service for your side mount handle. Screw the or maintenance performed by handle securely into one of the two unqualified personnel could result in a handle ports located at the base of the risk of injury. gear housing. 2. When servicing a tool, use only 2. Make sure tool is unplugged and lay it identical replacement parts. Follow on its back with the spindle upright. in
ページ5に含まれる内容の要旨
7. When finished release trigger switch. OPERATING YOUR Remember to let the polisher come to POLISHER a complete stop before resting tool on any surface. Speed Control Dial Lock On Switch MAINTENANCE Keep your tool in good condition by adopting a regular maintenance program. Before use, examine the general condition of your tool. Inspect guards, switches, tool cord and extension cord for damage. Check for loose screws, misalignment, binding of moving parts, improper mounting, Trigger broken par
ページ6に含まれる内容の要旨
PARTS LIST AND DIAGRAM 5
ページ7に含まれる内容の要旨
ページ8に含まれる内容の要旨
RPM's equivalents for indicator settings Please note there is 5% ‐ 10% tolerance on each setting. Setting 1.: 1062 RPM Setting 2.: 1842 RPM Setting 3.: 1922 RPM Setting 4.: 2331 RPM Setting 5.: 2573 RPM Setting 6.: 2988 RPM
