ページ1に含まれる内容の要旨
04121501 ’05-12-3N
KD-120.e.book 1 ページ ２００５年１２月８日 木曜日 午後３時３５分
®
OWNER’S MANUAL
We’d like to take a moment to thank you for purchasing the Roland KD-120.
Before using this unit, carefully read the sections entitled: “USING THE
UNIT SAFELY” (p. 2–3) and “IMPORTANT NOTES” (p. 3). These sections
provide important information concerning the proper operation of the unit.
Additionally, in order to feel assured that you have gained a good grasp of every
feature provided by your new unit, Ow
ページ2に含まれる内容の要旨
KD-120.e.book 2 ページ ２００５年１２月８日 木曜日 午後３時３５分 The symbol alerts the user to important instructions Used for instructions intended to alert or warnings.The specific meaning of the symbol is the user to the risk of death or severe determined by the design contained within the injury should the unit be used triangle. In the case of the symbol at left, it is used for improperly. general cautions, warnings, or alerts to danger. Used for instructions intended to alert The
ページ3に含まれる内容の要旨
KD-120.e.book 3 ページ ２００５年１２月８日 木曜日 午後３時３５分 104 • Try to prevent cords and cables from becoming entangled. Also, all cords and cables should be placed so they are out of the reach of children. .......................................................................................................... 106 • Never climb on top of, nor place heavy objects on the unit. .......................................................................................................... IMPORTAN
ページ4に含まれる内容の要旨
KD-120.e.book 4 ページ ２００５年１２月８日 木曜日 午後３時３５分 Features • Kick trriger pad with net material on head for superior playing feel, and quiet response. • The four-leg stand assures outstanding stability. • You can also play using a twin (double kick) pedal. Contents of the Package ❑ KD-120 Pad ❑ Leg x 2 ❑ Beater ❑ Stand ❑ Connection Cable ■ Owner’s Manual (this manual) This package does not include a kick pedal. Use with a commercially available kick pedal installed on the KD-120. Names of the K
ページ5に含まれる内容の要旨
KD-120.e.book 5 ページ ２００５年１２月８日 木曜日 午後３時３５分 Setup Assembling the KD-120 1. Place the KD-120 pad, with the head surface facing downward, on a flat surface such as the floor. 2. Use the included drum key to loosen and remove the bolts for the brackets on the back of the KD-120 pad. 3. Mount the stand on the brackets so that the output jack for the KD-120 pad faces up. Use the bolts you removed earlier to secure the KD-120 pad to the stand, tightening the bolts with the included drum
ページ6に含まれる内容の要旨
KD-120.e.book 6 ページ ２００５年１２月８日 木曜日 午後３時３５分 5. Loosen the T-bolts for the stand and mount the legs on the stand. Install the legs as shown in the figure so that the ends of the legs protrude by about 2 cm. Extend the leg by about 2 cm. Mount the legs on the stand. T-bolt 6. Tighten the T-bolts to secure the legs to the stand. 7. Lift the KD-120 and place the stand and the four legs upright. 8. Adjust the angle of the head surface so that it’s at a right angle to the floor. Use
ページ7に含まれる内容の要旨
KD-120.e.book 7 ページ ２００５年１２月８日 木曜日 午後３時３５分 When Using a Twin (Double Kick) Pedal With the KD-120, you can also play using a twin (double kick) pedal. Set this up so that the striking points of the two beaters fall at equal distances to the left and right of the center of the head. fig.13.e * When using a twin (double kick) pedal, as with a regular pedal, use the included beater or a plastic beater as the beater for the kick pedal. Connecting to the Sound Module Connecting the KD-120 to
ページ8に含まれる内容の要旨
KD-120.e.book 8 ページ ２００５年１２月８日 木曜日 午後３時３５分 Head Adjustment The head tension of the KD-120 can be adjusted. Adjusting the Head Tension When adjusting, use the included drum key or the drum key for your acoustic drums. In general, a tension that produces a strike response approximately the same as an acoustic bass drum will be appropriate. * Head tension that is too loose may not only cause incorrect operation, but may even damage the sensor. fig.14.e ac Lock nut tight
ページ9に含まれる内容の要旨
KD-120.e.book 9 ページ ２００５年１２月８日 木曜日 午後３時３５分 Head Replacement When the head should be replaced The head is an expendable item that eventually will wear out and need to be replaced. Replace the head when the following occurs: •The head surface is torn •Slack portions remain in the head even when the head tension is properly adjusted. Replacement heads (optional): Mesh Head (MH-12) Replacing the Head When replacing the head, use the included drum key or the
ページ10に含まれる内容の要旨
KD-120.e.book 10 ページ ２００５年１２月８日 木曜日 午後３時３５分 Information When you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as shown below. PHILIPPINES COSTA RICA TRINIDAD NORWAY JORDAN AFRICA G.A. Yupangco & Co. Inc. JUAN Bansbach Instrumentos AMR Ltd Roland Scandinavia Avd. MUSIC HOUSE CO. LTD. 339 Gil J. Puyat Avenue Ground Floor Musicales Kontor Norge FREDDY FOR MUSIC EGYPT Makati, Metro Manila 1200, Maritime Plaza Ave.1. Calle 11, Apa
