Roland DR-55の取扱説明書

ページ1に含まれる内容の要旨

ページ2に含まれる内容の要旨

ページ3に含まれる内容の要旨

ページ4に含まれる内容の要旨

FEB. 21,1980 1 RS FLIP FLOP (2/4 IC3) (a) PLAY Mode When the START switch S5 is turned ON, the Q cutput goes to H and trig- gers the Clock Generator (2). Mhen the STOP switch S6 is turned ON, the Q output goes to L and the Clock Generator stops oscillation. At this time, the Q output goes to H and resets the Binary Counter (5) (b) WRITE Mode The Q output goes to H when S5 is turned ON, and goes to L when S6 is turned ON. This condition is written in the Memory IC1 as a data. 2 CLOCK GENERATO

ページ5に含まれる内容の要旨

DR-5 5 6 256 x 4 BIT CMOS MEMORY (IC1) Reading/writing from/to this memory is as described below. The upper 3 bits designate rhythms 1-8, the next one bit designates VARIATION A and B, and. the lower 4 bits 16 steps in one rhythm. In PLAY mode, the terminal CE2 is connected. to the Clock generator output. The memory functions only when the clock is H, and outputs H's or L’s from DO 1-4. (When the clock is L, DO 1-4 becomes high impedance.) In WRITE mode, when the terminal R/~W becomes L,

ページ6に含まれる内容の要旨

however,the ACCENT function of the DR-55 proper becomes invalid.

ページ7に含まれる内容の要旨

ページ8に含まれる内容の要旨

ページ9に含まれる内容の要旨