ページ1に含まれる内容の要旨
e
d
i
m
u
h
s
n
i
o
M
•
d
i
m
u
H
s
s
e
L
t
r
INSTALLATION
P707
AND OPERATION Dehumidistat
INSTRUCTIONS
Part Number P707-MDEH1
cause of structure damage and IAQ problems such as mold
SAFETY CONSIDERATIONS
and mildew.
Installing, starting up, and servicing equipment can be haz-
ardous due to system pressures, electrical components and
INSTALLATION
equipment location (roofs, elevated structures, etc.). Only
trained, qualified installers and service mechanics should
NOTE: For technical assistance,
ページ2に含まれる内容の要旨
5. The dehumidistat consists of two pieces, a mounting OPERATION plate and the cover. Remove cover from the mounting When the dehumidistat is installed, the humidity dial should plate. Pull wiring through the hole in the mounting be set to the desired level. When the indoor humidity level at plate. the dehumidistat is exceeded, the ventilator will go into Over- 6. Connect wiring to the terminals on the mounting plate ride mode. Override mode will continue until relative humidity of the dehumidis
ページ3に含まれる内容の要旨
LIMITED TWO-YEAR WARRANTY TWO-YEAR WARRANTY — This CARRIER CORPORATION product is warranted to be free from defects in material and workmanship under normal use and maintenance for a period of two years from the date of original installation. A new or remanufactured part to replace the defective part will be provided without charge for the part itself, through a qualified servicing CARRIER CORPORATION dealer or service, PRO- VIDED the defective part is returned to our distributor. The replacemen
ページ4に含まれる内容の要旨
Manufacturer reserves the right to REPLACEMENT COMPONENTS DIVISION LITERATURE NUMBER P707-3SI discontinue, or change at any time, © CARRIER CORPORATION 2004 2-04 REPLACES: New specifications or designs without notice PRINTED IN U.S.A. CATALOG NUMBER 570-330 and without incurring obligations.
