ページ1に含まれる内容の要旨
CEC6P10501630
Z
-
GF 450K7
CD recorder with turntable/cassette player
OWNER'S MANUAL
ページ2に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO 5) Do not use this apparatus near water. NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE 6) Clean only with dry cloth. PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE 7) Do not block any ventilation openings. Install in accordance with PERSONNEL. the manufacturer’s instructions. 8) Do not install n
ページ3に含まれる内容の要旨
This product has been designed and manufactured according to WARNING: TO PREVENT FIRE OR SHOCK HAZARD, FDA regulations “title 21, CFR, chapter 1, subchapter J, based on the DO NOT EXPOSE THIS APPLIANCE TO RAIN OR Radiation Control for Health and Safety Act of 1968“, and is classified as class 1 laser product. There is not hazardous invisible laser MOISTURE. radiation during operation because invisible laser radiation emitted inside of this product is completely confined in the protective
ページ4に含まれる内容の要旨
Contents Before using the unit Thank you for choosing TEAC. Read this manual carefully to Read this before attempting any operations get the best performance from this unit. < The nominal temperature should be between 5°C and 35°C (41°F Before using the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 and 95°F). The CD-RW recorder is more sensitive to extremes of Handling Records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ5に含まれる内容の要旨
Handling Records How to Replace the Stylus < Do not touch the record’s grooves. Only handle records, by The stylus should last about 50 hours under normal use. However, it the edges or the label, with clean hands. Skin oils from even is recommended that the stylus be replaced as soon as you notice a clean hands can leave a residue on the record surface that will change in sound quality. gradually deteriorate the quality of your record. Prolonged use of a worn-out stylus may damage the record.
ページ6に含まれる内容の要旨
Discs Please use CD, CD-R and CD-RW discs bearing the “DIGITAL < Should the disc become dirty, wipe the surface radially (from AUDIO” mark. the center hole outward towards the outer edge) with a soft, dry CD cloth: CD-R CD-RW < Never use such chemicals as record sprays, antistatic sprays or fluid, benzine or thinner to clean the discs. Such chemicals will do irreparable damage to the disc’s plastic surface. < Discs should be returned to their cases after use to avoid dust and scratches tha
ページ7に含まれる内容の要旨
How to open/close the turntable cover About CD-R and CD-RW discs CD-R discs can be recorded once only. Once they have been used for recording, they cannot be erased or re-recorded. However, if space is available on the disc (and the disc has not been finalized), additional material can be recorded. By contrast, a CD-RW disc can be used in much the same way as a CD-R disc, but the last track or tracks recorded can be erased, and the space on the disc can be re- used for other recordings. Howe
ページ8に含まれる内容の要旨
Remote Control Unit The provided Remote Control Unit allows the unit to be operated Precautions concerning batteries from a distance. < Be sure to insert the batteries with correct positive “ +” and When operating the remote control unit, point it towards the negative “ _” polarities. REMOTE SENSOR on the front panel of the unit. < Use batteries of the same type. Never use different types of batteries together. < Even if the remote control unit is operated within the effective range, remote
ページ9に含まれる内容の要旨
( ) Normal Type I ( ) CrO2 Type II ( ) Metal Type IV Automatic tape type detection holes Handling Cassette Tape Instructions for use Tape types < Do not open a cassette or pull out the tape. There are several types of cassette tapes < Do not touch the tape. < Do not leave cassette tapes in a place with a lot of rubbish or dust. < Do not use or store cassette tapes in an area with high temperatures or humidity. < Keep cassette tapes away from magnets or magnetized items because they may cause
ページ10に含まれる内容の要旨
Connection A B C R L AUDIO OUT CD Player, Cassette Tape Deck, etc. CAUTION: < Switch off the power to all equipment before making connections. < Read the instructions of each component you intend to use with this unit. < Be sure to insert each plug securely. To prevent hum and noise, avoid bundling the signal interconnection cables together with the AC power cord. A FM antenna While in FM mode, tune in an FM station and extend the lead to find the best position for the reception. This antenna
ページ11に含まれる内容の要旨
Parts of the Turntable A B K C D J E I F Before use, detach the H stylus guard (white plastic cover) by pulling it straight off the front of the G cartridge in the direction of the arrow. A turntable G Cassette tape operation button Play ( y) B screw fixing the turntable for transportation Use this button to play a tape. Before use, completely loosen the screw by turning it clockwise Fast-forward ( ,) with a coin or screwdriver. Use this button to fast-forward a tape. Side view of the
ページ12に含まれる内容の要旨
Unit Functions and Remote Control A B C D E F G H I S R Q P O N M L K J I E Y T U Q V W P X F N J B O L 12
ページ13に含まれる内容の要旨
A O REC LEVEL POWER Press this button to turn the unit on or off. In record pause mode, use this knob to adjust the recording level. B PHONO/TAPE/AUX, FM/AM, CD P FINALIZE Press the PHONO/TAPE/AUX button and select PHONO to play a Use this button to finalize a CD-R/CD-RW disc. record. Press the PHONO/TAPE/AUX button and select AUX to listen to the external source connected to the AUX IN jacks. Q ERASE Press the FM/AM button to listen to the radio. Use this button to erase or unfinalize a CD
ページ14に含まれる内容の要旨
Basic Operation Listening to the Radio 1 2 2 1 3 1 Press the POWER switch to turn the unit on. 1 Select FM or AM using the FM/AM button. 2 Select a source by pressing the corresponding button. 2 Turn the TUNING knob to tune in a station. < To listen to an external source connected to AUX jacks, select < The TUNED indicator lights when a station is correctly tuned in. AUX by pressing the PHONO/AUX button once or twice. < The STEREO indicator lights when an FM stereo broadcast is When PHONO/TAPE
ページ15に含まれる内容の要旨
Listening to a Record 1 1 2 adaptor 4 transportation screw 7 6 3 5 < Before use, completely loosen the transportation screw by 4 Put the record on the turntable. turning them clockwise with a coin and remove the stylus guard. When playing a 45 RPM large hole single record, use the included adaptor. Select the speed. 5 1 Press the PHONO/TAPE/AUX button once or twice to select PHONO/TAPE. 2 Gently open the dust cover. 6 Gently push the clamper to the right to release the tone Be careful not
ページ16に含まれる内容の要旨
Listening to a Record 2 When the playback has been finished, the tone arm automatically returns to the tone arm holder and the rotation stops. 9 To stop playback manually, slightly lift the tone arm using the cue lever and return it to the tone arm holder. 8 tone arm 8 Move the tone arm gently to the edge of the record (or the starting point of a track). The turntable will begin to turn. cue lever 9 Gently lower the tone arm by slowly releasing the cue lever. You can lower the tone arm manua
ページ17に含まれる内容の要旨
Listening to a CD 1 1 5 3 2 4 1 Press the CD button. 4 Press the OPEN/CLOSE button ( L) to close the tray. “--” blinks for a few seconds. < It takes a few seconds for the unit to load the disc. No buttons When no disc is set, “nOdISC” appears on the display. will work during loading. Wait until the total number of the tracks and the total play time of the disc are displayed. disc type indicator 2 Press the OPEN/CLOSE button ( L). total number of the tracks total play time of the disc < The dis
ページ18に含まれる内容の要旨
Listening to a CD 2 Time Display A B C D Each time the DISPLAY button is pressed, the display changes as A To suspend playback temporarily follows: (pause mode) CD/CD-R/CD-RW playback Press the PAUSE button ( J) during playback. Playback stops at elapsed time of current track the current position. To resume playback, press the PLAY button ( y) or the PAUSE button ( J). time remaining for current track B To stop playback total elapsed time of the disc Press the STOP button ( H) to stop playb
ページ19に含まれる内容の要旨
Repeat Playback Shuffle Playback Each time the REPEAT button is pressed, the repeat mode is The tracks can be played randomly. Press the SHUFFLE button changed as follows: during playback. (In the stop mode, press the SHUFFLE button and the PLAY button.) REPEAT ALL REPEAT 1 When the shuffle playback of all the tracks has been finished, the (off ) unit stops and the shuffle playback mode is cancelled. < If you press the / button during shuffle playback, next track will be randomly selected an
ページ20に含まれる内容の要旨
Programmed Playback Up to 32 tracks can be programmed in the desired order. 4 When the selection of track numbers has been finished, press the PLAY button ( y) to start program playback. < Insert a disc and select “CD” before beginning programming. < Shuffle playback does not work during programmed playback. < Programmed playback works with finalized discs only. 1 Press the PROGRAM button in the stop mode. To check the programmed order In the stop mode, press the MUSIC SKIP button repeatedly t
