ページ8に含まれる内容の要旨
Connection B C A D RL AUDIO OUT CD Player, Cassette Tape Deck, etc. CAUTION: B FM antenna < Switch off the power to all equipment before making While in FM mode, tune in an FM station and extend the connections. lead to find the best position for the reception. This antenna < Read the instructions of each component you intend to use may need to be repositioned if you move your unit to a new with this unit. location. < Be sure to insert each plug securely. To prevent hum and noise, avoid bundling
ページ9に含まれる内容の要旨
ENGLISH Parts of the Turntable B A C D E F Before use, detach the stylus G guard (white plastic cover) by pulling it straight off the front of the cartridge in the direction of the arrow. A turntable B screw fixing the turntable for transportation Before use, completely loosen the screw by turning it clockwise with a coin or screwdriver. When you transport the unit, turn the screw counterclockwise to secure the turntable. C cue-lever Use this lever to lift the tone arm. D tone arm holder E speed
ページ10に含まれる内容の要旨
Unit Functions and Remote Control A B C D E F G H I J Q K P O N M L K F E R S D T X U V H W J I B N P 10
ページ11に含まれる内容の要旨
ENGLISH A O POWER Disc Tray Press this button to turn the unit on or off. P REC LEVEL B PHONO/AUX, CD, FM/AM In record pause mode, use this knob to adjust the recording Press the PHONO/AUX button and select PHONO to play a level. record. Press the PHONO/AUX button and select AUX to listen to the Q PHONES external source connected to the AUX IN jacks. For private listening, first reduce the volume level to Press the CD button to play a CD. minimum. Then insert the plug from your headphones into P
ページ12に含まれる内容の要旨
Remote Control Unit Basic Operation The provided Remote Control Unit allows the unit to be 2 operated from a distance. When operating the remote control unit, point it towards the REMOTE SENSOR on the front panel of the unit. < Even if the remote control unit is operated within the effective range, remote control operation may be impossible if there are any obstacles between the unit and the remote control. < If the remote control unit is operated near other appliances which generate infrared ra
ページ13に含まれる内容の要旨
ENGLISH Listening to the Radio 1 FM MODE button Pressing this button alternates between STEREO mode and MONO mode. STEREO FM stereo broadcasts are received in stereo and the 2 FM MODE “STEREO” indicator lights in the display. 1 Select FM or AM using the FM/AM button. < If the sound is distorted and the “STEREO” indicator flashes, the signal is not strong enough for good stereo reception. In this case, change to MONO mode. MONO To compensate for weak FM stereo reception, select this mode. Recepti
ページ14に含まれる内容の要旨
Preset Tuning 4 Press the ENTER/MEMORY button. 1 2 4 The station is stored and the MEMORY indicator goes off. To store more stations, repeat steps 1 to 4 . 3 2 You can store FM and AM stations into preset channels 1 to 9 How to select preset stations respectively. 1 Press the FM/AM button to select a band. 1 1 Tune in a station you want to listen to (see steps to 2 of page 13). 2 Press the ENTER/MEMORY button. 2 Press the PRESET button repeatedly until the desired preset station is found. < You
ページ15に含まれる内容の要旨
ENGLISH Listening to a Record 1 transportation screw 2 3 1 6 5 4 adaptor 3 < Before use, completely loosen the transportation screw by Put the record on the turntable. turning them clockwise with a coin and remove the stylus When playing a 45 RPM record, use the included adaptor. guard. 1 Press the PHONO/AUX button once or twice to select 4 Select the speed. PHONO. 2 Gently open the dust cover. 5 Gently push the clamper to the right to release the tone Be careful not to pinch your finger. arm.
ページ16に含まれる内容の要旨
Listening to a Record 2 When the playback has been finished, the tone arm automatically returns to the tone arm holder and the rotation stops. To stop playback manually, slightly lift the tone arm using the cue lever and return it to the tone arm holder. 8 tone arm 7 cue lever 7 Move the tone arm gently to the edge of the record (or the starting point of a track). The turntable will begin to turn. 8 Gently lower the tone arm by slowly releasing the cue lever. You can lower the tone arm manually
ページ17に含まれる内容の要旨
ENGLISH Listening to a CD 1 1 5 3 2 4 1 Press the CD button. 4 Press the OPEN/CLOSE button (L) to close the tray. < It takes a few seconds for the unit to load the disc. No “--” blinks for a few seconds. buttons will work during loading. Wait until the total number When no disc is set, “no dISC” appears on the display. of the tracks and the total play time of the disc are displayed. disc type indicator 2 Press the OPEN/CLOSE button (L) to open the tray. total number of the tracks total play time
ページ18に含まれる内容の要旨
Listening to a CD 2 Time Display C D A B To suspend playback temporarily (pause mode) Each time the DISPLAY button is pressed, the display changes as A follows: CD/CD-R/CD-RW playback Press the PLAY/PAUSE button (y/J) during playback. elapsed time of current track Playback stops at the current position. To resume playback, press the PLAY/PAUSE button (y/J) again. B To stop playback time remaining for current track Press the STOP button (H) to stop playback. total elapsed time of the disc C To sk
ページ19に含まれる内容の要旨
ENGLISH Repeat Playback Shuffle Playback Each time the REPEAT button is pressed, the repeat mode is The tracks can be played randomly. Press the SHUFFLE button changed as follows: during playback. (In the stop mode, press the SHUFFLE button and the PLAY/PAUSE button.) REPEAT ALL REPEAT 1 When the shuffle playback of all the tracks has been finished, (off) the unit stops but the shuffle playback mode is not cancelled. < If you press the / button during shuffle playback, next track will be randoml
ページ20に含まれる内容の要旨
Programmed Playback 3 Up to 32 tracks can be programmed in the desired order. Press the PROGRAM button. < Insert a disc and select “CD” before beginning programming. < Shuffle playback does not work during programmed playback. < Programmed playback works with finalized discs only. 1 Press the PROGRAM button in the stop mode. The track is programmed, and “P-02” is displayed. 2 3 Repeat steps and to program more tracks. < You can program up to 32 tracks. < To cancel the program mode, press the STO
ページ1に含まれる内容の要旨
ENGLISH FRANÇAIS ESPAÑOL
CEC6P10501230
Z
-
LP R400
Multi music player/CD recorder
OWNER’S MANUAL
MANUEL DU PROPRIÉTAIRE
MANUAL DEL USUARIO
ページ2に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, 4) Follow all instructions. DO NOT REMOVE COVER (OR BACK). NO USER- 5) Do not use this apparatus near water. SERVICEABLE PARTS INSIDE. REFER SERVICING TO 6) Clean only with dry cloth. QUALIFIED SERVICE PERSONNEL. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. The lightning flash with arrow
ページ3に含まれる内容の要旨
ENGLISH This product has been designed and manufactured according to WARNING: TO PREVENT FIRE OR SHOCK FDA regulations “title 21, CFR, chapter 1, subchapter J, based on HAZARD, DO NOT EXPOSE THIS APPLIANCE the Radiation Control for Health and Safety Act of 1968“, and is TO RAIN OR MOISTURE. classified as class 1 laser product. There is not hazardous invisible laser radiation during operation because invisible laser radiation emitted inside of this product is completely confined in the CAUTION pr
ページ4に含まれる内容の要旨
Contents Before using the unit Thank you for choosing TEAC. Read this manual carefully Read this before attempting any operations to get the best performance from this unit. < The nominal temperature should be between 5°C and 35°C Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 (41°F and 95°F). The CD-RW recorder is more sensitive to Before using the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 extremes of temperature than o
ページ5に含まれる内容の要旨
ENGLISH Handling Records How to Replace the Stylus The stylus should last about 50 hours under normal use. < Do not touch the record’s grooves. Only handle records, by However, it is recommended that the stylus be replaced as soon the edges or the label, with clean hands. Skin oils from even as you notice a change in sound quality. clean hands can leave a residue on the record surface that will Prolonged use of a worn-out stylus may damage the record. gradually deteriorate the quality of your re
ページ6に含まれる内容の要旨
Discs Please use CD, CD-R and CD-RW discs bearing the < Should the disc become dirty, wipe the surface radially (from “DIGITAL AUDIO” mark. the center hole outward towards the outer edge) with a soft, dry cloth: CD CD-R CD-RW < Never use such chemicals as record sprays, antistatic sprays or fluid, benzine or thinner to clean the discs. Such chemicals will do irreparable damage to the disc’s plastic surface. < Discs should be returned to their cases after use to avoid dust and scratches that coul
ページ7に含まれる内容の要旨
ENGLISH Turntable Cover About CD-R and CD-RW discs To attach the turntable cover CD-R discs can be recorded once only. Once they have been 1. Slide the hinges on both sides of the rear of the turntable into used for recording, they cannot be erased or re-recorded. the hinge fittings as far as they will go. However, if space is available on the disc (and the disc has not 2. Place the turntable cover hinge fittings over the top portion of been finalized), additional material can be recorded. the h
