ページ1に含まれる内容の要旨
USER MANUAL - BEDIENUNGSANLEITUNG
CE2.0 Crosstrainer
MODELNUMBER MODELNUMMER: CE2.0
MAX USER WEIGHT - MAX. BENUTZERGEWICHT: 135kg (300 lbs.)
SERVICENUMMER: + 49 (911) 8105924
SERVICEPHONE. 0800 0972100
SERIENNUMMER- SERIALNUMBER (on the frame):
ページ2に含まれる内容の要旨
2 CE2.0 Crosstrainer INDEX – INHALTSVERZEICHNIS 1. English P. 3 2. Deutsch P.23
ページ3に含まれる内容の要旨
3 CE2.0 Crosstrainer PRECAUTIONS Warning: Before starting any exercise program, it is recommended that you consult your physician, especially for persons with pre-existing health problems. Before using the new equipment, please review this manual to learn about the features, functions, and safety operations. It is the responsibility of the owner to ensure that all users of this equipment are adequately informed of all warnings and precautions. Should you experience any irregular phy
ページ4に含まれる内容の要旨
4 CE2.0 Crosstrainer PREASSEMBLY Open the boxes: You are now ready to open the boxes of your new equipment. Make sure to inventory all of the parts that are included in the boxes. Check the Hardware Comparison Chart for a full count of the number of parts included for this product to be assembled properly. If you are missing any parts or have any assembly questions call the manufacturer. Gather your tools: Before starting the assembly of your unit, make sure that you have
ページ5に含まれる内容の要旨
5 CE2.0 Crosstrainer PARTS LIST www.smoothfitness.co.uk
ページ6に含まれる内容の要旨
6 CE2.0 Crosstrainer PARTS LIST NO. DESCRIPTION QTYNO. DESCRIPTION QTY A1 MAIN FRAME 1 B1 CENTRAL SUPPORT TUBE 1 A2 MAGNETIC FLYWHEEL 1 B3 WATER BOTTLE 1 A3 FLAT WASHER 2 B5 COMPUTERCABLE; UPPER 1 A4 NUT 2 B6 HAND PULSE SENSOR WIRE 1 A5 TENSION PULLEY 1 B7 BOLT 2 A6 PIPE 3 B8 BUSHING 2 A7 FLAT WASHER 3 B9 SHAFT 1 A8 SCREW 3 B10 BEARING 4 A9 BEARING 4 B11 BUSHING 4 A10 E CLIP 3 B12 CONNECT TUBE 2 A11 MAGNETIC HOUSING 1 B13 FLAT WASHER 6 A12 NUT 1 B14 SPRING WASHER 8 A13 SCRE
ページ7に含まれる内容の要旨
7 CE2.0 Crosstrainer PARTS LIST NO. DESCRIPTION QTYNO. DESCRIPTION QTY A45 SENSOR WIRE 1 G3 END CAP 2 A46 FIXING HOUSING 1 G4 SCREW 4 A47 RIGHT COVER 1 H1/H2 DECORATION COVER 1 A48 DECORATION COVER 1 H3/H4 PEDAL JOINT COVER 1 A49 LEFT COVER 1 H5/H6PEDAL 1 A50 DECORATION COVER 1 J1 KNOB 2 A51 SCREW COVER 8 J2 SCREW 4 A52 SCREW 8 J3 SCREW 4 A53 SCREW 3 J4 FLAT WASHER 4 A54 TAPPING SCREW 6 J5 SPRING WASHER 4 A55 POWER CORD SENSOR 1 J6 STARKNOB 4 A56 SCREW 4 A57 TENSION CABL
ページ8に含まれる内容の要旨
8 CE2.0 Crosstrainer EXPLODED DIAGRAM www.smoothfitness.co.uk
ページ9に含まれる内容の要旨
9 CE2.0 Crosstrainer ASSEMBLY INSTRUCTIONS First, remove the bolts (C4), washers (C5) and nuts (C6) from rear stabilizer (C). Insert two bolts (C4) through the rear stabilizer (C) to attach it to the bracket at the back of the main frame (A). Then secure it with washers (C5), spring washers (C6) and nuts (C7). A. First remove the bolts (D7), washers (D8) and (D9) as well as nuts (D10) from the front stabilizer (D). Insert two bolts (D7) through the front stabilizer (D)
ページ10に含まれる内容の要旨
10 CE2.0 Crosstrainer ASSEMBLY INSTRUCTIONS First remove the bolts (B21), spring washers (B14) and washers (B13) from the central support tube (B) Step 1 Connect the cable (B5) & (A15) Step 2 Assemble the central support tube (B) onto the main frame (A) with bolts (B21), spring washers (B14) and washers (B13) Attention: When pushing the tubes together make sure not to pinch cables. Remove the screws (E4) from the back of the monitor (E). Connect the sen
ページ11に含まれる内容の要旨
11 CE2.0 Crosstrainer ASSEMBLY INSTRUCTIONS Pull up right or left connect tube (A43) and adjust the suitable position which 4 holes are available when loosing the pop – pin the middle tube (B) and lower tube (A43) will be fixed securely First move the bolts (G4), from the side handlebar (G). Then slide the side handlebar (G) over central support tube (B). Secure with bolts (G4). During handlebar assembly you have to use the holes as pictured in close up view. Repeat ste
ページ12に含まれる内容の要旨
12 CE2.0 Crosstrainer ASSEMBLY INSTRUCTIONS First, remove the bolts (B7) from the central support tube (B) and remove the screw (F3) from the handlebar (F). Connect cables (F5) to sensor wires (B6). Connect the front handlebars (F). Connect cables (F5) to sensor wires (B6). Connect the front handlebars (F) to central support tube (B) and twist the bars together. Secure them with two bolts (B7) and one screw (F3) Connect right side pedal tube joint covers (H3 & H4) ont
ページ13に含まれる内容の要旨
13 CE2.0 Crosstrainer ASSEMBLY INSTRUCTIONS The machine can be operated using the electricity adaptor. The front stabilizer has built-in transport wheels. To move the machine, stand at the front and lift it up until the weight of the machine is transferred to the transport wheels. You can now easily move the machine to a new location. www.smoothfitness.co.uk
ページ14に含まれる内容の要旨
14 CE2.0 Crosstrainer COMPUTER INTSTURCTIONS Functions: TIME: Count up – No reset target, Time will count up from 00:00 to maximum 99:59 in one second increments. Count down – If training with preset time, Time will count down from preset to 00:00. Each preset increment or decrement is 1 minute between 1:00 to 99:00. SPEED: Display current training speed from 0.0 to maximum 99.9 km or ml. RPM: Display current training rotation per minute. DISTANCE: Count up-
ページ15に含まれる内容の要旨
15 CE2.0 Crosstrainer BUTTON FUNCTIONS 1. Power on, LCD will display segment for 2 seconds with long beep sound. Use UP or DOWN buttons to select U1 (user 1) to U9 (user 9) as the users identification, then input personal data: sex, age, height, weight. You may use UP or DOWN to select and adjust the data, then press MODE/ENTER. 2. Pres ENTER UP DOWN buttons to set year / month / day / clock; screen will enter standby mode. 3. Manual is blinking in the sleep mode, you
ページ16に含まれる内容の要旨
16 CE2.0 Crosstrainer www.smoothfitness.co.uk
ページ17に含まれる内容の要旨
17 CE2.0 Crosstrainer Training in MANUAL mode 1. In the MANUAL mode, you may turn UP/DOWN button to select load level from 1 to 16, the preset level is 1. 2. After load level is selected, you may preset functions values for TIME, DISTANCE, CALORIES and PULSE by turning the UP/DOWN button and press ENTER to confirm. 3. Pressing the START starts the training program. Training in USER PROGRAM After USER Program selected, you may set preferred program profile by turning UP,
ページ18に含まれる内容の要旨
18 CE2.0 Crosstrainer Training in HRC mode: Age 25 is flashing after HRC mode is entered, you may set your age by turning UP/DOWN/ENTER button. The monitor will calculate preset heart rate value automatically according to your age setting. Screen will show heart rate percentage 55%, 75%, 90% and TARGET. You may select heart rate percentage with UP/DOWN/ENTER button for training. www.smoothfitness.co.uk
ページ19に含まれる内容の要旨
19 CE2.0 Crosstrainer Training in WATT mode: The preset value 120 is flashing on screen in WATT setting mode, select UP/DOWN/ENTER to set target value from 10 to 350. Pressing Training in BODY FAT mode: You may test and have the BODY FAT advice when the computer is in STOP mode. Please follow the steps as below: Step I – Make sure the personal data has been input properly Step II – Press BODY FAT button and hold on handgrip to start body fat testing. Step III – The symbo
ページ20に含まれる内容の要旨
20 CE2.0 Crosstrainer * 1 BODY FAT This is a figure that is calculated from all the personal data you input and the signal transferred by putting your thumb on the sensor. The computer will use the signal and your personal data to figure out the fat percentage of your body. * 2 BMI Body Mass Index: This value is calculated from your weight and height and indicates if you are overweight. All the BMI & BODY FAT advice figures are supposed to be a basic guide to help you lead a hea
