ページ1に含まれる内容の要旨
EU-Declaration of Conformity.........................................7
Temperature and Humidity Station
with Atomic Time
Model: RMR203HG
USER MANUAL
CONTENTS
Overview...........................................................................2
Front View...........................................................................2
Back View............................................................................2
Remote Sensor...................................................................3
ページ2に含まれる内容の要旨
OVERVIEW 8. Clock with weekday 9. MEM: View current, maximum, minimum temperature / FRONT VIEW (FIG 1) humidity 10. Ice alert LED indicator BACK VIEW (FIG 2) O U T 1. Remote sensor reception indicator 2. Clock signal reception indicator 3. MODE: Change settings / display 4. LIGHT: Activate backlight for 5 seconds 1. °C / °F: Select temperature unit 5. / : Increase / decrease settings; activate / 2. RESET: Reset unit to default settings deactivate clock reception signal 3. EU / UK: Select
ページ3に含まれる内容の要旨
REMOTE SENSOR (FIG 3) MEANING LOCATION Clock / alarm Main unit batteries low 2 Sensor batteries low Outdoor temperature and humidity area 1 REMOTE SENSOR 4 The main unit can collect data from up to 3 sensors. 3 5 To set up the sensor: 1. Open the battery compartment (see FIG 3). 2. Select a channel then press RESET. 3. Close the battery door. 4. Place the sensor within 30 m (98 ft) of the main unit using the table stand or wall mount. TIP Ideal placements for the sensor would be in any 1.
ページ4に含まれる内容の要旨
ICON DESCRIPTION Main unit is searching for sensor(s). A channel has been found. The sensor cannot be found. 1.5 m (5 ft) TIP The transmission range may vary depending on many factors. You may need to experiment with various locations to get the best results. CLOCK CLOCK RECEPTION Use alkaline batteries for longer usage and consumer grade lithium batteries in temperatures below This product is designed to synchronize its clock freezing. automatically with a clock signal. Slide EU /
ページ5に含まれる内容の要旨
reception is unsuccessful, place your unit next to a window, To auto-scan between sensors: press and hold to force another signal search. Press and hold + MEM to display each sensor’s data for Clock signal reception indicator: 3 seconds. To end press . To toggle between current, minimum and maximum STRONG WEAK NO SIGNAL records for the selected sensor: SIGNAL SIGNAL Press MEM repeatedly. To clear the records: Press and hold MEM. ICE WARNING MANUALLY SET CLOCK If the channel 1 sensor fa
ページ6に含まれる内容の要旨
• Do not tamper with the unit’s internal components. This Weight 241 g (8.5 oz) without battery invalidates the warranty. • Only use fresh batteries. Do not mix new and old Temperature range -5°C to 50°C (23°F to 122°F) batteries. Resolution 0.1°C (0.2°F) • Images shown in this manual may differ from the actual display. Signal frequency 433 MHz • When disposing of this product, ensure it is collected Humidity range 25% - 95% separately for special treatment. • Placement of this product on cer
ページ7に含まれる内容の要旨
www2.oregonscientific.com/about/international.asp. EU-DECLARATION OF CONFORMITY Hereby, Oregon Scientific, declares that this Temperature and Humidity Station with Atomic Time (Model: RMR203HG) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the signed and dated Declaration of Conformity is available on request via our Oregon Scientific Customer Service. COUNTRIES RTTE APPROVED COMPLIED All EU countries, Switzerland CH
