ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
Introduction UNPACKING AND Congratulations on Your Purchase! Your new high fidelity Compact Disc Player is designed to deliver maximum enjoyment and years of trouble free service. CLASS1 Please take a few moments to read this manual thoroughly. It will LASER PRODUCT explain the features and operation of your unit and help ensure a trouble free installation. Please unpack your unit carefully. We recommend that you save the carton and packing material. They will be helpful if you ever need to mov
ページ3に含まれる内容の要旨
READ THIS BEFORE OPERATING FOR U.S.A. AND CANADA ......................................120 V FOR OTHER COUNTRIES........................... 115 V/230 V FOR YOUR SAFETY FOR YOUR SAFETY Units shipped to the U.S.A. and Canada are designed Units shipped to countries other than the above for operation on 120 V AC only. countries are equipped with an AC voltage selector switch on the rear panel. Refer to the following Safety precaution with use of a polarized AC plug. paragraph for the proper setting
ページ4に含まれる内容の要旨
CONTENTS Introduction UNPACKING AND INSTALLATION....................................................................................................... 2 READ THIS BEFORE OPERATING YOUR UNIT.................................................................................. 3 Rear Panel Connections ................................................................................................................................5 Front Panel & Remote Controls..........................................
ページ5に含まれる内容の要旨
Rear Panel Connections • Do not plug the AC input cord into the AC outlet when plugging and unplugging connection cords. • Be sure to connect the white plugs to the L(Left) and the red plugs to the R(Right) jacks when making connections with the supplied cords. • Refer to the connecting diagram in the operating instructions of AMPLIFIER/RECEIVER. OUTPUT JACKS Connect these jacks to the CD(or AUX) input jacks of your amplifier or receiver. DIGI LINK JACKS Connect this jack to the DIGI LINK jack o
ページ6に含まれる内容の要旨
Front Panel & Remote Controls FRONT PANEL CONTROLS - REMOTE CONTROLS (ONLY FOR CDC 5090R) 6 ENGLISH
ページ7に含まれる内容の要旨
POWER SWITCH DISC SKIP BUTTON Press this switch to turn the power on and press again For loading or unloading discs, press this button to to turn the power off. rotate clockwise to the next disc position. For system operation, plug the AC input cord into the switched AC outlet on amplifier or receiver, keep the DISC SELECTOR BUTTONS POWER switch ON and control power ON/OFF with Use these buttons to select the disc to be played. the power operation on the amplifier or receiver. TIME BUTTON DISC
ページ8に含まれる内容の要旨
FLUORESCENT DISPLAY TRACK No. and TIME DISPLAY INTROSCAN INDICATOR DISC No. DISPLAY RANDOM PLAY INDICATOR MUSIC CALENDAR DISPLAY PROGRAM INDICATOR PLAY INDICATOR DELETE INDICATOR PAUSE INDICATOR EDIT DISPLAY REPEAT INDICATOR INDICATORS FOR REPEAT, INTRO REPEAT A< >B INDICATOR SCAN AND RANDOM PLAY MODE DIGI LINK SYSTEM REMOTE CONTROL This unit can be remotely controlled with Sherwood DIGI LINK III amplifier or receiver. • For available functions, refer to the operating instructions of the Sher
ページ9に含まれる内容の要旨
REMOTE CONTROL OPERATION RANGE (ONLY FOR CDC-5090R) • Use the remote control unit within a range of about 7 meters (23 feet) and angles of up to 30 degrees aiming at the remote sensor. LOADING BATTERIES (ONLY FOR CDC-5090R) Remove the cover. Load two batteries(“AAA” size) matching the polarity. 1 2 • Remove the batteries when they are not used for a long time. • Do not use the rechargeable batteries(Ni-Cd type). 9 ENGLISH
ページ10に含まれる内容の要旨
Before Operation • Only compact discs bearing this mark can be reproduced. Notes • Do not expose discs to direct sunlight, high humidity or high temperature for a long time. • When loading or unloading a disc in the disc tray, always place it with the printed side up. • In handling a disc, hold it carefully with the edges. • Do not stick paper or write anything on the printed surface. • The DTS logo on the front means that the CD encoded with the DTS signal can be heard in DTS mode when this dig
ページ11に含まれる内容の要旨
Operations PLAYING CDs Turn the power on. Load the disc(s) and close the disc tray. 1 2 " " indicator lights up when the number of tracks is more than 14. For loading discs on other trays each, press the DISC SKIP button. 8cm(3 inches) CDs can be loaded on the inside circle of the tray, too. Each time the POWER switch is pressed, this unit is Note turned on or off. Do not open or close the tray by force. Doing so may damage it. Start play. To interrupt play temporarily. 3 4 “ ” indicator lights
ページ12に含まれる内容の要旨
CHANGING DISCS DURING Change the desired discs. Open the disc tray. 1 2 During playing the disc , the discs and can be changed. After changing the discs, press the OPEN/CLOSE button to close the disc tray. When changing the disc or , press the “DISC SKIP” button and rotate the disc tray. SKIP AND SEARCH PLAY Selecting a disc Searching for a passage during play Press the corresponding button to start play from the Press and hold down these buttons until the desired desired disc. passage is reache
ページ13に含まれる内容の要旨
PLAYING TRACKS IN RANDOM SEQUENCE 1 disc random play All discs random play In the 1 disc random play mode, press “RANDOM” button again. The unit automatically selects a disc among five discs and a track on that disc in random sequence and plays it. After that track has been played, the unit continues to select another disc and a track on that disc in random sequence and plays it. Press again to cancel the random play. “RANDOM” indicator lights up. The unit automatically selects and plays tracks
ページ14に含まれる内容の要旨
REPEAT PLAY Repeating a single track during play Press this button after selecting the desired track. Each time this button is pressed, the repeat mode changes as follows: REPEAT 1 REPEAT 1 DISC REPEAT ALL DISCS OFF Repeating a disc during play Repeating all discs during play After selecting the desired disc, press again in the 1 Press again in the 1disc repeat mode. track repeat mode. Press again to cancel the repeat play. At the end of the desired passage, press Repeating a specific passage du
ページ15に含まれる内容の要旨
PLAYING TRACKS IN ANY SEQUENCE Up to 32 selections can be programmed to play in any desired sequence. The track number greater than 99 can not be memorized. Select the desired disc. Programming the tracks on the CDs Example) When selecting the disc 1. 2 In the stop mode, enter the program mode. 1 If the PROGRAM/REVIEW button is pressed without selecting a track, the selected disc is programmed as a selection. Select the desired track. Store the selected track in the memory. Example) When selecti
ページ16に含まれる内容の要旨
Repeat the above steps 2, 3 and 4 until the desired program is completed. 5 Start the programmed play. During the programmed play, when you want normal 6 play without clearing your programmed selections, select the desired disc with the DISC SELECTOR or DISC SKIP button or the desired track on the current disc with the NUMERIC buttons, then normal play will start from that disc or that track. To return to the program mode(meaning “PROG” lights up in the stop mode), press the PROGRAM/REVIEW butto
ページ17に含まれる内容の要旨
Select the track 7. 3 Store the selected track in the memory. 4 When selecting a track with the NUMERIC buttons, the selected track is stored automatically without the PROGRAM/REVIEW button. Clearing the programmed selections To clear one by one To clear all programmed selections Each time this button is pressed in the program Press this button for more than 4 seconds in the mode, the programmed selections are cleared one by program mode. one in the opposite sequence. Opening the disc tray clear
ページ18に含まれる内容の要旨
EDITING FOR RECORDING Up to 30 tracks for auto edit or 32 tracks for manual edit can be edited according to the tape length. It is possible only on the current disc. Making auto edit In the stop mode, select the auto edit Each time this button is pressed, the edit mode changes mode. as follows: 1 AUTO EDIT (MANUAL) EDIT OFF In the edit mode, the auto space function, leaving a 4 second blank space between the tracks, is automatically activated for the automatic music search function on the Sherw
ページ19に含まれる内容の要旨
Select the tape length as you do in Making manual edit “Making auto edit” procedure. 2 In the stop mode, select the manual edit mode. 1 Press the PROGRAM/REVIEW button to Edit the tracks for the side A repeating manually edit the tracks to be recorded. steps 3 and 4 in “PLAYING TRACKS IN 3 4 ANY SEQUENCE (PROGRAMMED PLAY)” procedure on page 15. Notes During manual edit, if the "-" indicator in the time display disappears and “ ” flickers, it means that the total time of the edited tracks exceed
ページ20に含まれる内容の要旨
Checking the edited tracks In the edit mode, check as you do the programmed tracks. (refer to “Checking the programmed selections” on page 16) Clearing all edited tracks In the edit mode, press the STOP/CLEAR button for more than 4 seconds or open the tray. In the manual edit mode only, you can clear or rectify the edited tracks as you do in “Rectifying any wrong programmed selection” or “Cleaning the programmed selections” on page 16 and 17. SELECTING A BRIGHTNESS OF THE DISPLAY (ONLY Each tim
