ページ1に含まれる内容の要旨
OWNER'S
MANUAL
ECD-T1137S
PLL Synthesized Stereo Radio with
Digital Compact Disc Player
1pair of RCA output
CD-R/CD-R W Compatibility
4 preset Equalization
Auxiliary Input
ページ2に含まれる内容の要旨
INSTALLATION Notes: • Choose the mounting location where the unit will not interfere with the normal driving function of the driver . • Before finally installing the unit, connect the wiring temporarily and make sur e it is all connected up properly and the unit and the system works properly. • Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions. • Consult with your nearest dealer if installation requires the drilling
ページ3に含まれる内容の要旨
1. Dashboard 1 6 2. Nut (5mm) 3. Spring washer 4 4. Screw (5 x 14mm) 5 2 3 5. Screw 6. Strap Be sure to use the strap to secure the back of the unit in place. The strap can (Fig. 2) be bent by hand to the desired angle. Removing the unit 1. Frame 1 2. Insert fingers into the groove in the front of frame and pull out to remove the frame. (When reattaching the frame, point the side with a groove downwards 2 and attach it.) 3 3. Lever Insert the levers supplied with the unit into the grooves
ページ4に含まれる内容の要旨
HOW TO REMOVE AND INSTALL THE FRONT PANEL (OPTIONAL) 1. Press the release button and pull-of f the front panel. Store front panel in the case. 2. To install the front panel, insert the panel into the housing and make sure the panel is properly installed, otherwise, abnormalities may occur on the display or some keys may not function properly. REMOVING THE FRONT PANEL Front Panel Release Button INSTALLING THE FRONT PANEL 4
ページ5に含まれる内容の要旨
WIRING CONNECTION MAIN UNIT ANTENNA CONNECTOR IGNITION RED SWITCH (B+) YELLOW MEMORY (GREY) BACK-UP Rch RED RCA CABLE BLACK GROUND (B-) Lch WHITE BLUE POWER ANTENNA WHITE GREY FRONT Lch FRONT Rch SPEAKER SPEAKER WHITE/BLACK GREY/BLACK GREEN VIOLET REAR Lch REAR Rch SPEAKER SPEAKER GREEN/BLACK VIOLET/BLACK 5
ページ6に含まれる内容の要旨
OPERATION 11 7 1 2 3 5 8 18 19 13 4 9 12 10 24 20 21 22 14 23 6 16 15 17 26 25 GENERAL OPERATION ON/OFF Switch on the unit by pressing any button [except button (7) and eject button (4)]. When system is on, press PWR button (9) to turn off the unit. FACEPLATE RELEASE Press button (7) to detach the removable faceplate. 6
ページ7に含まれる内容の要旨
The adjustment mode will change in the following order: Volume Bass Treble Balance Fader By pressing VOL button + (11) or VOL button - (12), it is possible to adjust the desired sound level. LOUDNESS Press BND/LOU button (13) for several seconds to reinforce the bass output and display will show "LOUD". Press it for several seconds again to release this function. SET THE CLOCK Press the DSP button (15), the clock is shown on the LCD display. Then hold down the button until the clock flashes.
ページ8に含まれる内容の要旨
RADIO OPERATION BAND SELECTION At tuner mode, press BND/LOU button (13) to select the desired band. The reception band will change in the following order: FM1 FM2 FM3 AM STATION SELECTION Press MANU/SKIP button (16) or MANU/SKIP button (17) to activate automatic seek function. To select manual tuning mode, press for several seconds until "MANUAL" appears on the display. If both buttons are not pressed for several seconds, the tuner will return to seek tuning mode and "AUTO" will appear on t
ページ9に含まれる内容の要旨
CD OPERATION SELECT TRACKS Press MANU/SKIP button (16) or MANU/SKIP button (17) to move to the previous track or the following track. Track number shows on display. Hold MANU/SKIP button (16) or MANU/SKIP button (17) to fast reverse or fast forward. CD play starts from when you release the button. PAUSE PLAYING Press PAU button (20) to pause CD player. Press it again to resume play. REPEAT THE SAME TRACK Press RPT button (22) to continuously repeat the same track. Press again to stop rep
ページ10に含まれる内容の要旨
Note: A. Notes on discs: 1. Attempting to use non-standar d shape discs (e.g. square, start, heart) may damage the unit. Be sure to use round shape CD discs only for this unit. 2. Do not stick paper or tape etc., onto the label side or the recording side of any discs, as it may cause a malfunction. 3. Dirt, dust, scratches and warping discs will cause misoperation. B. Notes on CD-Rs (recordable CDs)/ CD-RWs (rewritable CDs): 1. Be sure to use discs with following marks only for the unit to
ページ11に含まれる内容の要旨
SPECIFICATION GENERAL Power Supply Requirements : DC 12 Volts, Negative Ground Chassis Dimensions : 178 (W) x 165 (D) x 50 (H) Tone Controls - Bass (at 100 Hz) : + 10 dB / - 10 dB - Treble (at 10 KHz) : + 10 dB / - 10 dB Maximum Output P ower : 40W x 4 (ch) Current Drain : 15 Ampere (max.) CD PLAYER Signal to Noise Ratio : More than 55 dB Channel Separation : More than 50 dB Frequency Response : 40 Hz - 18 KHz RADIO FM Frequency Coverage : 87.5 to 107.9 MHz IF : 10.7 MHz Sensitivity (S/N = 30 d
ページ12に含まれる内容の要旨
TROUBLE SHOOTING Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your near est service dealer. Symptom Cause Solution No power. The car ignition switch is If the power supply is properly not on. connected to the car accessory circuits, but the engine is not running, switch the ignition key to "ACC" The fuse is blown. Replace the fuse. Disc cannot be Presence of CD disc inside Remove the disc in the player, loa
ページ13に含まれる内容の要旨
SANYO MOBILE AUDIO MODEL ECD-T1137S LIMITED WARRANTY OBLIGATIONS In order to obtain warranty service, the product must be delivered to and picked up from an Authorized Sanyo Factory Service Center at the user's expense, unless specifically stated otherwise in this warranty. The names and addresses of Authorized Sanyo Service Centers may be obtained by calling the toll-free number listed below. For product operation, authorized service center referral, service assistance or problem resolution, c
ページ14に含まれる内容の要旨
ページ15に含まれる内容の要旨
ページ16に含まれる内容の要旨
21605 Plummer Street Chatsworth, CA91311 ECD-T1137S. Issue Number 1. Printed in Hong Kong 88-C1007-11
