ページ1に含まれる内容の要旨
REFRIGERATOR - FREEZER
ZCFF7/5W
INSTRUCTION BOOKLET
214.3675.70
ページ2に含まれる内容の要旨
Contents Instructions for the User Instructions for the Installer Safety Instructions 2 Technical Specifications 11 Description of the Appliance 3 Installation 12 Control Panel 4 Unpacking 12 Using the Appliance 5 Positioning 12 Before Use 5 Ventilation 12 Starting the Appliance 5 Levelling 12 Freezer Compartment 5 Electrical Connection 13 Freezing Fresh Food 5 Electrical Requirements 13 Frozen Food Storage 5 Door Reversal 14 Refrigerator Compartment 5 Chill Compartment 5 Food Storage 6 Energy S
ページ3に含まれる内容の要旨
Safety Instructions These warnings are provided in the interests of your safety. Ensure that you unders- tand them all before installing or using this appliance. If you are unsure of the mea- nings of these warnings contact the Customer Care Department. Bottles and cans must not be placed in the fre- Installation ezer compartment as they can burst as the con- This appliance is heavy. Care should be taken tents freeze. when moving it. Manufacturers recommended food storage It is dangerous
ページ4に含まれる内容の要旨
y B d Description of Appliance 0 7 3 7 3 5 5 COLLECTION Control Panel 1 Freezer Temperature Control 4 Door Alarm 2 Fridge Temperature Control 5 Temperature Alarm 3 ON/OFF Button 6 Fast Freezer Button 3 n a t S
ページ5に含まれる内容の要旨
3. ON/OFF Button Control Panel To switch the appliance on or off, press the The appliance controls are located in the top panel insi- ON/OFF button continuously for 3 seconds. When de the refrigerator compartment. the appliance is switched on, the ON/OFF button will illuminate. Thermostat Control The freezer and fridge thermostats control the tempe- 4. The Door Alarm rature inside the freezer and refrigerator respectively. If either of the doors are left open, the door alarm will sound and the a
ページ6に含まれる内容の要旨
ページ7に含まれる内容の要旨
Food Storage Energy Saving Advice Ensure that food placed in the freezer is dated Do not install the cabinet close to sources of heat, and labeled and used in date order to ensure such as a cooker, dishwasher or radiator. that food is consumed at its best. Locate the appliance in a cool well-ventilated room Remove suspect food from your fridge freezer and make sure that the air openings of the cabinet and clean, refer to Maintenance and Cleaning. are not obstructed. Do not put any ne
ページ8に含まれる内容の要旨
Defrosting Maintenance and Your appliance is frost free, which means there is no need to manually defrost your appliance, as this Cleaning will be carried out automatically. Before any maintenance or cleaning work Changing the light bulb is carried out DISCONNECT the applian- 1. Switch off the appliance by pressing the ce from the ELECTRICITY supply. ON/OFF button, and then unplug the appliance. 3. Open the plastic light cover, by pushing External Cleaning upwards on the centre clip. The cover w
ページ9に含まれる内容の要旨
Something Not Working If your appliance is not operating correctly, carry out the following checks before contacting your local Service Force Centre. Important: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or ins- tallation a charge will be made, even if the appliance is under guarantee. Symptom Cause Solution Interior Light (refrigerator) Appliance is not plugged in Plug in the appliance does not work The appliance is not switched on
ページ10に含まれる内容の要旨
Normal Operating Sounds 1. Temperature control May cause clicking sounds when the system is connected or disconnected. 2. Cooling system The injected cooling gas may produce a gurgling sound while passing through the tubes. 3. Motor May cause a humming noise and or slight knocking sound. 4. Fans You may occasionally hear the fans working. This is normal; the fans help to ensure the air circulates more effectively. Service and Spare Parts In the event of your appliance requiring service, or if yo
ページ11に含まれる内容の要旨
GUARANTEE CONDITIONS Standard guarantee conditions We, Zanussi, undertake that if within 12 months of the date of purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: The appliance has been correctly installed and used only on the electricity supply stated on the rating plate. The appliance has been
ページ12に含まれる内容の要旨
Technical Specifications A distance of 56mm must exist between the appliance and the wall, to allow the door to be fully opened. The refrigeration system and the insulation of this appliance do not contain CFCs or HCFCs. ZCFF7/5W Height (mm) 1850 Width (mm) 595 Depth (mm) 670 Power Supply 220-240V / 50Hz Total Power Absorbed 150W Energy Consumption kWh/year 372.3 kWh/day 1.02 Freezing Capacity (Kg/24hrs) 10 Gross Capacity (ltrs/cu.ft) Fridge 205/7.3 Freezer 130/4.6 Net Capacity (ltrs
ページ13に含まれる内容の要旨
Installation Unpacking Remove all transit packaging, including the door transit retainers located under the plinth. (Fig 1) and shelf retainers (Fig 2). Fig. 1 Positioning The appliance should be located in a well-ventilated, dry room. To ensure correct operation the appliance should: Not be exposed to direct sunlight. Not be installed next to radiators, cookers or other sources of heat. Fig. 2 Only be installed in a location where the ambient temperature corresponds to the climate classif
ページ14に含まれる内容の要旨
Electrical Connection Any electrical work required to install this appliance must be carried out by a quali- fied electrician or competent person. This appliance must be earthed. The manufacturer declines any liability should these safety measures not be observed. Electrical Requirements Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance rating plate. The appliance is supplied with a 13 amp plug fitted. In the event of having to change th
ページ15に含まれる内容の要旨
Door reversal If you wish to change the opening direction of the doors, proceed as follows: B 1. Open the freezer door. Remove the plinth (A) at the bottom of the appliance, by pushing downwards and pulling outwards. (See fig 5) 2. Remove the hinge cover (B) in the plinth and repo- sition on the opposite side of the plinth. 3. Whilst supporting the lower door, use a 8mm nut driver to remove the 3 hinge retaining bolts and remove the lower hinge. 4. Carefully lower the door off the central hinge.
ページ16に含まれる内容の要旨
