ページ1に含まれる内容の要旨
PLCD67
OWNER’S MANUAL
Mobile Audio System
• PLL Synthesizer Stereo Radio
• Digital Compact Disc Player
• Automatically Memory Storing
• Preset Equalization
• Remote Control
• Electronic Detachable Panel
ページ2に含まれる内容の要旨
CONTENTS Installation .....................................................................................................3 DIN Front-Mount (Method A) ..................................................................................3 Installing the unit...............................................................................................3 Removing the unit .............................................................................................4 DIN Rear-Mount (Method B) .........
ページ3に含まれる内容の要旨
INSTALLATION Notes: DIN FRONT-MOUNT (Method A) • Choose the mounting location where Installing the unit the unit will not interfere with the normal driving function of the driver. 1 2 • Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up 53 properly and the unit and the system 3 work properly. • Use only the parts included with the unit to ensure proper installation. (Fig. 1) The use of unauthorized parts can cause malfunctions. 1. Dash
ページ4に含まれる内容の要旨
INSTALLATION Removing the unit DIN REAR-MOUNT (Method B) Installation using the screw holes on the sides of the unit. 1 1 2 Open/Close 4 2 2 3 3 4 Fastening the unit to the factory radio mounting bracket. 1. Before removing the frame, press the 1. Select a position where the screw OPEN/CLOSE button to slide down holes of the bracket and the screw the front panel. holes of the main unit become aligned 2. Frame (are fitted), and tighten the screws at 3. Insert fingers into the groove in the 2
ページ5に含まれる内容の要旨
USING THE DETACHABLE FRONT PANEL To Detach the Front Panel To Reinstall the Front Panel 1. Press the OPEN/CLOSE button, the 1. When the panel bracket is in slide front panel will slide down. down position, insert the front panel into panel bracket and press OPEN/CLOSE button to slide up. Open/Close 2. Press the OPEN/CLOSE button again, Bottom Button the front panel will slide up. 2. When the panel bracket is in slide up position, insert a side of the front panel to its proper position and pu
ページ6に含まれる内容の要旨
WIRING CONNECTION MAIN UNIT ANTENNA CONNECTOR (BLACK) Rch RED CD IN IGNITION RED Lch WHITE SWITCH (B+) YELLOW MEMORY (GREY) BACK-UP CHOKE Rch RED RCA CABLE BLACK BOX GROUND (B–) Lch WHITE BLUE POWER ANTENNA WHITE GREY FRONT Lch FRONT Rch SPEAKER SPEAKER WHITE/BLACK GREY/BLACK GREEN VIOLET REAR Lch REAR Rch SPEAKER SPEAKER GREEN/BLACK VIOLET/BLACK 6
ページ7に含まれる内容の要旨
OPERATION 10 11 24 8 2 23 15 1 7 4 13 16 12 17 19 20 21 14 22 18 6 9 3 5 press it again to slide up the front panel GENERAL OPERATION into the main body or detach the removable faceplate. • ON/OFF Switch on the unit by pressing any • SOUND ADJUSTMENT button (except OPEN/CLOSE button Press SEL button (10) shortly to select (7) and EJECT button (4)). the desired adjustment mode. When system is on, press POWER The adjustment mode will change in button (9) to turn off the unit. the following or
ページ8に含まれる内容の要旨
OPERATION For Electrical Volume: • REMOTE SENSOR By pressing AUDIO CONTROL Point the remote control handset to button (11) or AUDIO CONTROL the remote sensor RX (23). Press the button (12), it is possible to adjust the function keys on the handset to control desired sound quality. the system. For Digital Rotating Volume: • RESET By rotating the knob (11 & 12) Reset button (24) is placed on the front clockwise or counter-clockwise, it is panel and must be activated with either possible
ページ9に含まれる内容の要旨
OPERATION retune to seek tuning mode and CD OPERATION “AUTO” appeared on the display. • SELECT TRACKS • LOCAL/DISTANCE Press TUNE/SKIP/TRACK button Press LOC button (3) shortly to select between (16) or TUNE/SKIP/TRACK button local and distant stations. Local setting for (17) to move to the previous track or the reception of strong station, and a distant following track. Track number shows on setting for reception of weaker stations. display. • AUTOMATICALLY MEMORY Hold TUNE
ページ10に含まれる内容の要旨
REMOTE CONTROL HANDSET 1 7 4 3 8 9 6 5 13 2 12 10 11 14 15 FUNCTION KEYS & CONTROL 1. PWR = Power ON/OFF Button 2. DSP = Display Button 3. SEL = Select Button 4. VOL = Volume Up Button 5. VOL = Volume Down Button 6. BND = Band Select Button 7. MOD = Mode Button 8. TUNE/SEEK = Tune/Seek Down Button 9. TUNE/SEEK = Tune/Seek Up Button 10. AMS = Automatic Storing & Program Scanning Button 11. M1 - M6 = Preset Buttons 12. PAU = Pause Button 13. SCN = Scanning Button 14. RPT = Repeat Button 15. SHF =
ページ11に含まれる内容の要旨
SPECIFICATION GENERAL Power Supply Requirements : DC 12 Volts, Negative Ground Chassis Dimensions : 178 (W) x 180 (D) x 50 (H) Tone Controls - Bass (at 100 Hz) : ± 10 dB - Treble (at 10 KHz) : ± 10 dB Maximum Output Power : 4 x 50 Watts Current Drain : 5 Ampere (max.) CD PLAYER Signal to Noise Ratio : More than 55 dB Channel Separation : More than 50 dB Frequency Response : 20 Hz - 20 KHz RADIO FM Frequency Coverage : 87.5 to 107.9 MHz IF : 10.71 MHz Sensitivity (S/N = 30 dB) : 3 µ V Stereo Sepa
ページ12に含まれる内容の要旨
TROUBLE SHOOTING Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer. Symptom Cause Solution No power. The car ignition switch is If the power supply is properly not on. connected to the car accessory circuits, but the engine is not moving, switch the ignition key to “ACC”. The fuse is blown. Replace the fuse. Disc cannot Presence of CD disc inside Remove the disc in the player, then be
