ページ1に含まれる内容の要旨
UseAhdCare
A Note To You 2
kizE2Ed~ 3
Parts And Features 4
Before Using Your
5
Refrigerator
Using Your
Refrigerator 7
pa$royr
21
Food Storage Guide 24
If You Need
.
26
PEz
Warranty 28
1-800-253-1301
Cell us with questions or comments.
NO-FROST REFRIGERATOR-FREEZER
MODELS ED25PW ED22PW ED22HP
ED25PB ED22PB
ページ2に含まれる内容の要旨
A Note To You Thank you for buying a Whirlpool’ appliance. You have purchased a quality, worM&~ss home appliance. Years of engineering experience went into its manufacturing. To ensure that you enjoy many years of trouble-free operation, we developed this Use and Care Guide. It is full of valuable information on how to operate and maintain your appliance properly and safely. Please read it carefully. Also, please com- plete and mail the Ownership Registration Card provided with your applia
ページ3に含まれる内容の要旨
. .--- 7--- Important Safety Instructions To reduce the risk of fire, electrical shock, or injury when using your refrigerator, follow these basic precautions: *Read all instructions before using the l Never clean refrigerator parts with refrigerator. flammable fluids. The fumes can create a fire hazard or explosion. @Child entrapment and suffocation are not problems of the past. Junked or l FOR YOUR SAFETY l abandoned refrigerators are still danger- DO NOT STORE OR USE GASOLINE OR
ページ4に含まれる内容の要旨
Parts And Features This section contains captioned illustrations. Use them to become familiar with where all parts and features are located and what they look like. The model you have purchased may have all or some of the parts and features shown and they may not match the illustration exactly. This manual covers several models. Control panel Light Automatic ice Model and maker - serial number - label (on side wail) Ice bin \ Light Dtiiity (below ice bin)’ compartment Freezer she
ページ5に含まれる内容の要旨
- I-- Before Using Your Refrigerator In This Section Page Page 5 Installing it properly . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Cleaning it . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .,.......................................... 6 Plugging it in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Leveling it It is important to prepare your refrigerator for use. This section tells you how to clean it,
ページ6に含まれる内容の要旨
Installing it properly 1. Allow % inch (1.25 cm) space on each side and at the top of the refrigerator for ease of installation. 2. If the refrigerator is to be against a wall, you might want to leave extra space on the hinge side closest to the wall so the door can be opened wider. 3. The refrigerator can be flush against the wall. 4. Make sure ice maker water supply has been connected. Refer to Installation Instructions. Leveling it Your refrigerator has 2 front leveling screws-
ページ7に含まれる内容の要旨
- Using Your Refrigerator In This Section Page Page Setting the controls ............................ 7 Removing the freezer shelves ........ .13 Removing the freezer basket.. ........ .13 Changing the control settings ........... 8 Removing the freezer door .... . Removing the snapoff door trim.. shelves .............................................. 13 Adjusting the door bins .................... .9 Using the ice and water Adjusting the door bin glides ........... .9 14 dispens
ページ8に含まれる内容の要旨
NOTE: The Automatic Exteriir Moisture 3. Give the refrigerator time to cool down completely before adding food. This may control continuousty guards against moisture take several hours. build-up on the outside of your refrigerator The settings indicated above should be cabinet. This control does not have to be set correct for normal, household refrigerator or adjusted. usage. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm. lf you need
ページ9に含まれる内容の要旨
Removing the snap-off door trim (on some models) To remove the trim piece: 1. Remove all items from the shelf. 2. Pull out on the inside tab at each end of the trim piece. 3. Pull trim piece straight out. To replace the trim piece: 1. Line up ends of the trim piece with the button on the door liner wall. 2. Push trim piece straight back until it snaps securely into place. 3. Replace items on the shelf. Adjusting the door bins To remove door bins: 1. Lift bin up. 2. Pull bin strai
ページ10に含まれる内容の要旨
- .- Removing the tall-bottle retainer The tall-bottle retainer fits onto any door bin in your refrigerator. The retainer helps to hold tall-bottles in place when opening and closing the refrigerator door. To remove tall-bottle retainer: 1. Grasp center of retainer. 2. Pull up and off of bin. To replace tall-bottle retainer: 1. Position retainer above desired door bin. 2. Gently push retainer down onto bin. Notch 3. Make sure both side notches sit firmly against bin. Adjusting the
ページ11に含まれる内容の要旨
Removing the crisper and crisper cover To remove the crisper: I Pull out to the 1. Slide the crisper straight out to the stop. stop, lift the front 2. Lift the front slightly. and pull again. 3. Slide out the rest of the way. 4. Replace in reverse order. To remove the cover: 1. Hold cover firmly with both hands and lift front of cover off supports. 2. Lift cover out by pulling up and out. Lift the cover To replace the cover: front, then 1. Fit back of cover into notch supports on
ページ12に含まれる内容の要旨
Adjusting the crisper humidity control You can control the amount of humidity in the moisture-sealed crisper. l Adjust the control to any setting between LOW and HIGH. l LOW (open) lets moist air out of the crisper for best storage of fruits and vegetables with skins. l HIGH (closed) keeps moist air in the crisper for best storage of fresh, leafy vegetables. Adjusting the meat drawer temperature Cold air flows against the meat drawer through an opening between the freezer and Use co
ページ13に含まれる内容の要旨
Removing the freezer shelves To remove the shelf: 1. Lii right side of shelf off supports. 2. Slide shelf out of shelf support holes. 3. Replace in reverse order. Removing the freezer basket To remove the basket: Pull out to the stop, lift the 1. Slide basket out to the stop. front and pull 2. Lift the front to clear the stop. again. 3. Slide basket out the rest of the way. To replace the basket: 1. Place basket on the slides. 2. Make sure the wire stops clear the front of the sl
ページ14に含まれる内容の要旨
Using the ice and water dispensers Personal injury Hazard Tumbling ice and pressure can break a fragile glass. Use a sturdy glass when dispensing ice or water. Failure to do so could result in personal injury or breakage. The ice dispenser Ice dispenses from the ice maker storage bin in the freezer. When you press the dispenser bar, a trapdoor opens in a chute between the dispenser and the ice bin. Ice moves from the bin and falls through the chute. When you release the dispenser ba
ページ15に含まれる内容の要旨
To dispense water: 1. Press a sturdy glass against the water dispenser bar. 2. Remove the glass to stop dispensing. NOTE: Dispense enough water every week to maintain a fresh supply. Using the automatic ice maker UP to Here are a few things you will want to know stop ice about your automatic ice maker: maker. l The ON/OFF lever is a wire signal arm. DOWN to make ice automatically. DOWN to t UP to shut off the ice maker. start ice maker. NOTE: Do not turn ice maker on until it i
ページ16に含まれる内容の要旨
Removing the ice maker storage bin Remove, empty and clean the storage bin if: l the ice dispenser has not, or will not, be used for a week or more. l a power failure causes ice in the bin to melt and freeze together. l the ice dispenser is not used regularly. To remove ice bin: 1. Pull the coveting panel out from the bottom and slide it to the rear. 2. Lift the signal arm so it clicks into the OFF (up) position. Ice can still be dispensed, but no more can be made. 3. Lift the front
ページ17に含まれる内容の要旨
Solving common ice maker/dispenser problems CAUSE SOLUTIONS PROBLEM ice dispenser l Close the freezer door. l Freezer door open won’t work l Ice bin not properly l Make sure bin is pushed in all the way. installed l Wrong ice in bin l Use only crescents from ice maker. Shake the bin occasionally to keep cubes separated and to increase storage room. l Dispenser not used for l Dump old ice and make a new supply. extended periids, causing ice cubes to melt together ice dispenser l
ページ18に含まれる内容の要旨
Removing the base grille Condenser coils To remove the grille: I 1. Open both doors. 2. Pull base grille forward to release the support tabs from the metal clips. 3. Do not remove Tech Sheet fastened behind the grille. To replace the grille: 1. Line up grille support tabs with metal clips. 2. Push firmly to snap into place. 3. Close the doors. See cleaning instructions for defrost pan and condenser coils on page 22. Changing the light bulbs I Electrical Shock Hazard Before rem
ページ19に含まれる内容の要旨
To change crisper light: 1. Disconnect refrigerator from power supply. 2. Pull top of light shield forward until it snaps free. 3. Lower light shield to clear bottom supports. 4. Pull light shield straight out to remove. 6. Replace bulb with a 40-watt appliance bulb. risper light 6. Replace light shield in reverse order. 7. Reconnect refrigerator to power supply. To change light below ice bin: 1. Disconnect refrigerator from power supply. 2. Push in sides of light shield until it s
ページ20に含まれる内容の要旨
- Understanding the sounds you may hear Your new refrigerator may make sounds that Water sounds your old one didn’t. Because the sounds are When the refrigerator stops running, you new to you, you might be concerned about may hear gurgling in the tubing for a few them. Don’t be. Most of the new sounds are minutes after it stops. You may also hear normal. Hard surfaces like the floor, walls defrost water running into the defrost water and cabinets can make the sounds seem pan. loude
