ページ1に含まれる内容の要旨
Contents
Getting Started.......................... 2
CD Receiver
CR-515DAB
Connections ............................ 16
CR-315DAB
Basic Operation ...................... 27
Instruction Manual
Playing a Disc.......................... 30
Listening to the Radio ........... 38
Clock and Timer ...................... 49
Thank you for purchasing an Onkyo CD Receiver.
Please read this manual thoroughly before making
any connections and plugging it in.
Following the instructions in this manual w
ページ2に含まれる内容の要旨
WARNING: WARNING AVIS RISK OF ELECTRIC SHOCK RISQUE DE CHOC ELECTRIQUE TO REDUCE THE RISK OF FIRE OR ELECTRIC DO NOT OPEN NE PAS OUVRIR SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within CAUTION: the product’s enclosure that may be of sufficient TO REDUCE THE RISK OF ELECTRIC SHOCK, magnitude to constitute a risk of el
ページ3に含まれる内容の要旨
Precautions 1. Recording Copyright—Unless it’s for personal use •Avoid damp and dusty places, and places subject only, recording copyrighted material is illegal with- to vibrations from loudspeakers. Never put the out the permission of the copyright holder. unit on top of, or directly above a loudspeaker. • Install this unit horizontally. Never use it on its 2. AC Fuse—The AC fuse inside the unit is not user- side or on a sloping surface, because it may cause serviceab
ページ4に含まれる内容の要旨
Supplied Accessories Precautions—Continued Make sure you have the following accessories: This unit contains a semiconductor laser system and is classified as a “CLASS 1 LASER PRODUCT”. So, to use this model properly, read this Instruction Manual carefully. In case of any trouble, please contact the store where you purchased the unit. To prevent being exposed to the laser beam, do not try to open the enclosure. Remote controller and two batteries (AA/R6) DANGER: VISIBLE
ページ5に含まれる内容の要旨
Before Using the CD Receiver Installing the Batteries Using the Remote Controller When you operate the remote controller, point it at the Detach the battery cover by pressing the CD receiver’s remote control sensor, as shown below. 1 tab and pulling up the cover. Remote control sensor CD receiver Insert two AA-size batteries into the bat- 2 tery compartment. Carefully follow the polarity diagram (positive Notes: (+) and negative (–) symbols) inside the battery • The remote co
ページ6に含まれる内容の要旨
Features Amplifier • WRAT (Wide Range Amplifier Technology) • High Current, Low Impedance Drive • Discrete Output Stage Circuitry • Optimum Gain Volume Circuitry • Subwoofer Pre Out — CR-515DAB — • VLSC (Vector Linear Shaping Circuitry)* •4 Audio Inputs and 2 Outputs (1 on front panel) — CR-315DAB — •3 Audio Inputs (1 on front panel) and 1 Output CD Player • Plays CDs, MP3 CDs, CD-Rs and CD-RWs • 25 Track Programming •2 Repeat Mode (Track/Full) •4 Play Modes (Normal/Random/Memor
ページ7に含まれる内容の要旨
Contents Basic Operations Getting Started Clock and Timer Important Safety Instructions ..............................2 Setting the Clock ..............................................49 Precautions ........................................................3 Setting AccuClock to Use a Specific Supplied Accessories .........................................4 Station ........................................................49 Before Using the CD Receiver ..........................
ページ8に含まれる内容の要旨
Getting to Know the CD Receiver Front Panel CR-515DAB 12 3 4 5 6 7 8 9 J K L M N O CR-315DAB 12 3 4 5 6 P 8 9 Q J R M N O 8
ページ9に含まれる内容の要旨
Getting to Know the CD Receiver—Continued The page numbers in parentheses show where you can find the main explanation for each item. A STANDBY indicator (25, 27) P LINE IN jack (CR-315DAB) (23) Lights up in Standby mode. This stereo minijack is for connecting an audio source, such as an MP3 music player or personal B STANDBY/ON button (27, 50, 53, 56) computer. Sets the CD receiver to On or Standby. Q DISPLAY button (CR-315DAB) (31, 34, 39)
ページ10に含まれる内容の要旨
Getting to Know the CD Receiver—Continued Display 12 3 4 5 6 7 8 9 J K L M N O P 1, 2, 3, 4: Light up when a timer has been pro- A SLEEP indicator grammed. Lights up when the Sleep function has been set. B MP3 indicator : Lights up when a timer has been programmed Lights up when an MP3 CD is loaded. for recording. C PCM indicator K Tuning indicators Lights up when the digital input signal received by AUTO: Lights up when Auto Tuning is selected, the DIGITAL IN jack is PCM. It flashes if the si
ページ11に含まれる内容の要旨
Getting to Know the CD Receiver—Continued Rear Panel CR-515DAB CR-315DAB 12 3 4 5 6 7 H M IJK L The page numbers in parentheses show where you can find the main explanation for each item. A LINE 1 IN (CR-515DAB) (25) I REMOTE CONTROL (20–24) This analog audio input is for connecting a compo- This (Remote Interactive) jack can be con- nent with an analog output, such as a TV, or a turn- nected to an jack on another Onkyo component. table with a built-in phono equalizer. The CD receiver’s remote
ページ12に含まれる内容の要旨
Getting to Know the CD Receiver—Continued Remote Controller RC-662S RC-660S (CR-515DAB) (CR-315DAB) A M A M B B N N 3 3 O O P P Q Q 4 R 4 R S S 5 5 6 6 T T 7 7 8 8 9 9 J J U U K K V V L L 12
ページ13に含まれる内容の要旨
Getting to Know the CD Receiver—Continued The page numbers in parentheses show where you can find the main explanation for each item. A STANDBY/ON button (27, 53) L Onkyo MD recorder and cassette deck This button is used to set the CD receiver to On or control buttons Standby. For twin cassette decks, only Deck B can be con- trolled. B SLEEP button (55) : Plays side B (cassette deck). Used to set the Sleep timer, which turns off the CD :Pauses playback or recording (MD). receiver after a specifi
ページ14に含まれる内容の要旨
Disc Notes Supported Discs Discs Made on Personal Computers The CD receiver supports the following discs. Discs made on personal computers, including those of a compatible format, may not work properly in the CD Disc Logo Format or file type receiver because of incorrect settings in the disc burning software. Check the manuals supplied with your disc Audio CD PCM burning software for additional compatibility informa- tion. Audio CD, MP3 MP3 Compatibility CD-R • MP3 discs must be ISO 9660 Leve
ページ15に含まれる内容の要旨
Disc Notes—Continued • The following ID3 tags are supported: versions Handling Discs 1.0/1.1 and 2.2/2.3/2.4. Versions 2.5 and later are not •Never touch the underside of a disc. Always hold discs supported. Normally, version 2.2/2.3/2.4 tags have by the edge, as shown. priority and will be displayed regardless of the ID3 VER 1 preference on page 37. •For ID3 version 2 tags, the tag information recognized will be those embedded in the beginning of the file. We recommend that you include onl
ページ16に含まれる内容の要旨
Connecting Antennas This section explains how to connect the supplied indoor If you cannot achieve good reception with the supplied FM antenna, AM loop antenna, and DAB antenna, and indoor FM antenna, try a commercially available out- how to connect commercially available outdoor FM and door FM antenna instead (see page 17). AM antennas. Connecting the AM Loop Antenna The CD receiver won’t pick up any radio signals without an antenna connected, so you must connect the antenna The supplied ind
ページ17に含まれる内容の要旨
Connecting Antennas—Continued Connecting the DAB Antenna •For safety reasons, outdoor antenna should be situated well away from power lines and other high-voltage equipment. Screw the supplied DAB antenna’s plug 1 • Outdoor antenna must be grounded in accordance onto the DAB ANTENNA jack. with local regulations to prevent electrical shock haz- Once the CD Receiver is ready for use, you’ll ards. need to tune into a DAB station and adjust the ■ Using a TV/FM Antenna Splitter position of the
ページ18に含まれる内容の要旨
Connecting Speakers Connecting Your Speakers • Connect the right speaker to the CD receiver’s right (R) SPEAKERS terminals. Connect the left speaker to the left (L) SPEAKERS terminals. • Connect the positive (+) terminal on each speaker to the corresponding positive (+) terminal on the CD receiver. Connect the negative (–) terminal on each speaker to the corresponding negative (–) terminal on the CD receiver. Use the red wires to connect the positive (+) terminals. Right speaker Left speaker
ページ19に含まれる内容の要旨
Connecting Other Components About Connections • Before making any connections, read the manuals • Push plugs in all the way to make Right! supplied with your other components. good connections (loose connec- tions can cause noise or malfunc- • Don’t connect the power cord until you’ve completed tions). and double-checked all connections. •To prevent interference, keep Wrong! Connection Color Coding audio cables away from power cords and speaker cables. RCA-type audio connections are usually
ページ20に含まれる内容の要旨
Connecting Other Components—Continued Connecting an Onkyo Cassette Deck The following diagram shows how to connect an optional Onkyo cassette deck. Connect the CD receiver’s MD/TAPE OUT jacks to the cassette deck’s INPUT (REC) jacks, and connect the CD receiver’s MD/TAPE IN jacks to the cassette deck’s OUTPUT (PLAY) jacks. CR-515DAB’s Onkyo cassette deck’s rear panel rear panel LINE 1 INPUT OUTPUT Red IN REMOTE (REC) (PLAY) CONTROL L OUT White MD/ Analog audio cables (RCA) TAPE R White IN OUT
