ページ1に含まれる内容の要旨
Mini Compo CD Player
with Radio
Model: MX9790
Memcorp, Inc.
Weston, FL
Printed in Hong Kong
Note: Please read and follow these instructions before using your unit.
Visit our website at www.memorexelectronics.com
ページ2に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS WARNING TO PREVENT ELECTRIC SHOCK; DO NOT USE THIS PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADES EXPLOSURE. TO PREVENT FIRE OR SHOCK HAZARD; DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block a
ページ3に含まれる内容の要旨
LOCATION OF CONTROLS CONNECTING THE LOUDSPEAKERS Connect the cables of the two loudspeakers to the corresponding input (R) for the right speaker and input (L) for the left speaker, located at the back of the unit. Warning: Connect the loudspeakers before powering the unit: The unit may not work properly or get damaged if you use speakers different than the ones supplied with the unit AC OPERATION Connect the plug to the AC socket of the unit and the other end to a standard AC
ページ4に含まれる内容の要旨
PROGRAMMING THE CD PLAYER RADIO WAKE UP FUNCTION The programming of the CD player should be done during STOP mode. Select the desired radio station and set the volume to the desired level and 1. Press the PROGRAM button to begin programming the CD player; make the following steps: 2. Press SKIP or SKIP buttons, to select desired track; 1. Slide the Function Switch to auto position; 3. Press PROGRAM button again to store this track in memory; 2. Press the ALARM ON/OFF button once
ページ5に含まれる内容の要旨
1. Stop Button USEFUL ADVICE BEFORE REQUIRING SERVICE SUPPORT 2. Skip/Search Button Many of the problems are probably caused by improper adjustments of the product or by 3. Skip/Search Button simple problems. Before contacting your Service Centre for help, check the following table. 4. Repeat Button PROBLEM CAUSE AND REMEDY GENERAL 5. Play/Pause Button No Power Supply - Check that the power cord is properly 6. Battery Compartment connected to wall out. No Audio - Adjust
ページ6に含まれる内容の要旨
CARE AND MAINTENANCE Precautions 1. Always turn OFF the unit after use; 2. Keep the unit away from magnetic objects, water or any heat sources; 3. Use a clean soft moist cloth to clean the unit’s cabinet. Do not use chemical cleaners that could damage the finishing of the unit; 4. Never touch the CD pickup lens. If fingerprints get on the pickup lens, use a commercial lens cleaner. 5. Disconnect the unit from any power sources before starting the cleaning operation. SPECIFICATION C
