ページ1に含まれる内容の要旨
Model PMD325 User Guide
CD Player
R
CLASS 1 LASER PRODUCT
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
TEXT
ページ2に含まれる内容の要旨
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within
ページ3に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT 13. Power-Cord Protection – Power-supply cords should be routed so This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, precautions which you should be particularly aware of. convenience receptacles, and the point
ページ4に含まれる内容の要旨
FIGURE 1 EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE, ANSI/NFPA 70 ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ELECTRIC GROUNDING CONDUCTORS SERVICE (NEC SECTION 810-21) EQUIPMENT GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) NEC - NATIONAL ELECTRICAL CODE NOTE TO CATV SYSTEM INSTALLER: This reminder is provided to call the CATV (Cable-TV) system installer's attention to Article 820-40 of the NEC, which provides gu
ページ5に含まれる内容の要旨
INSTALLATION FOREWORD Remember the following important points when installing the player: This section must be read before any connection is made to the • Do not expose the player to rain or moisture, as this may cause mains supply. damage to the player. • All players produce some heat during operation and this heat must be allowed to disperes freely. Do not close any ventilation openings Warnings and insure that there is adequate ventilation space behind, beside and above the player. Do not exp
ページ6に含まれる内容の要旨
ENGLISH CONTENTS 1. BEFORE USING....................................................................................................3 2. ACCESSORIES .....................................................................................................5 3. FEATURES ............................................................................................................6 4. CONNECTIONS ....................................................................................................7 5. NAMES
ページ7に含まれる内容の要旨
1. BEFORE USING Notes about the discs Inappropriate places for installation To keep your player in perfect working order for the longest * Handle the discs carefully so as not to scratch their surfaces. possible time, avoid installing the player in the following locations. * Keep the surfaces of the discs clean at all times. When cleaning the surfaces of discs, always be sure to • Wherever it will be exposed to direct sunlight use the special cleaner and wipe the surfaces in the • Wherever it wi
ページ8に含まれる内容の要旨
ENGLISH BEFORE USING Do not place objects on top Cautions on handling batteries Misuse of the batteries can result in electrolyte leakage, • Refrain from placing any objects on top of the player. rupturing, corrosion, etc. Bear in mind the following points when using batteries. Cautions on handling power cord • Remove the batteries from the remote control unit if the unit is not going to be used for a prolonged period (a month • Do not touch the power cord with wet hands. or more). • When discon
ページ9に含まれる内容の要旨
2. ACCESSORIES • Operational range Checking the accessories As shown in the figure below, the player can be operated After opening the cover of the packing box, check that the by the remote control unit in a range which of about 5 meters following accessories are included. from the player’s remote sensor and over an angle up to • Remote control unit (RC7300CD) 30 degrees to the left and 30 degrees to the right of the position directly in front. OPEN/CLOSE DISPLAY REPEAT 12 3 4 5 6 AMS 78 9 RANDO
ページ10に含まれる内容の要旨
ENGLISH 3. FEATURES • Play of unfinalized CD-R and CD-RW discs • Manual cue function supported By setting the play start position in advance, play can always be started at the preset position. The PMD325 can play even partially once-written CD-R and CD-RW discs that could not be played by conventional CD players. Since unfinalized discs which have some • End warning function recording time left can be played, even partially edited When the end of the track being played is approached, discs can
ページ11に含まれる内容の要旨
4. CONNECTIONS This CD player is connected to an amplifier, CD recorder and • Connecting the ANALOG BALANCED other components for use. To ensure that the components OUT (analog balanced output) connectors are connected properly, refer to the instruction manuals that Connect the unit to the stereo amplifier or AV amplifier using come with the components to be connected. XLR connector cables. Before connecting the components, be absolutely sure to turn When making the connections, insert the plug
ページ12に含まれる内容の要旨
ENGLISH CONNECTIONS • Connecting the coaxial output connector Connecting to a digital audio component Use a coaxial digital connecting cable available on the market. This unit comes with three different digital output connectors: BALANCED OPTICAL (x1), COAXIAL (x1) and DIGITAL OUT (SPDIF) R L (digital balanced). CONTROL I/O RS232C OUTPUT LEVEL L IN You can enjoy digital recording when the player is connected DIGITAL OUT (SPDIF) to a CD recorder or other digital recording component. R OUT CONNECT
ページ13に含まれる内容の要旨
5. NAMES AND FUNCTIONS Front panel CD PLAYER PMD325 STOP CUE PLAY/PAUSE OPEN/CLOSE TIMER RNDM PROG A — B RPT 1 S.PLAY END DISC TTL TRK INDX TTL TIME WARNING —+ ALBUM MP3 EASY JOG TEXT 1 2 3 4 5 6 7 8 9 10 11121314 1516 17181920 POWER ON/OFF QUICK REPLAY LEVEL PHONES 1 23456789 0 - + POWER ON/OFF switch (search forward) button This is used to turn the player’s power ON and OFF. When This is used to search forward during play. it is pressed, the display lights and the power is turned It also serv
ページ14に含まれる内容の要旨
ENGLISH NAMES AND FUNCTIONS Display TIMER RNDM PROG A — B RPT 1 S.PLAY DISC TTL TRK INDX TTL TIME MP3 TEXT 12 3 4 5 6 7 8 9 10 1112 1314 1516 1718 1920 Main display RPT (repeat) indicator This displays the time information and text information of This lights during repeat play. the disc played, the setting menus, etc. 1 (1-track repeat) indicator TEXT indicator This lights during 1-track repeat play. This lights when a disc supporting CD-TEXT has been loaded. S.PLAY (single track play) indicator
ページ15に含まれる内容の要旨
NAMES AND FUNCTIONS , (track skip) buttons Remote control unit : Use this to return to the start of the track now playing or return to the start of the previous track. : Use this to advance to the start of the subsequent track. (stop) button This is used to stop the play. OPEN/ CLOSE DISPLAY REPEAT (pause) button 12 3 This is used to temporarily suspend play. AMS 4 5 6 , (search) buttons RANDOM 78 9 : This button is used to search backward when it is held down during play. A-B PROGRAM CANCEL
ページ16に含まれる内容の要旨
ENGLISH NAMES AND FUNCTIONS A-B (A-B repeat) button SCROLL/RECALL button This is used to set start point (A) and end point (B) when a This is used to scroll the text display when text is displayed. particular section is to be played repeatedly. When it is pressed during program play, it is possible to check which tracks have been programmed. CANCEL button This is used to cancel the programmed tracks. ENTER button This is used to enter the play function settings. TIME button This switches the mai
ページ17に含まれる内容の要旨
NAMES AND FUNCTIONS ANALOG BALANCED OUT (analog balanced CONTROL I/O (control input/output) connector This connector is used to connect the remote control input/ output) connector output signals. For details, refer to “How to use the The signals of the music now playing are output from this CONTROL I/O (control input/output) connector” (page 41). connector. Using an XLR connector cable, connect the connector to a component equipped with an analog balanced input RS-232C connector connector. Usin
ページ18に含まれる内容の要旨
ENGLISH 6. BASIC OPERATIONS Playing CDs • Stopping play CD PLAYER PMD325 STOP CUE PLAY/PAUSE OPEN/CLOSE TIMER RNDM PROG A — B RPT 1 S.PLAY END DISC TTL TRK INDX TTL TIME — ALBUM + WARNING MP3 EASY JOG TEXT 12 3 4 5 6 7 8 9 10 1112 1314 1516 1718 1920 POWER ON/OFF QUICK REPLAY LEVEL PHONES 1 23456789 0 - + STOP CUE PLAY/PAUSE JOG 2 3, 4 5 QUICK REPLAY LEVEL PHONES - + OPEN/CLOSE DISPLAY 3, 4 12 3 REPEAT AMS 4 5 6 RANDOM 78 9 Press the button on the player or remote control unit during PROGRAM 0
ページ19に含まれる内容の要旨
BASIC OPERATIONS Playing a specific track • Specifying the number of a track to be • Playing a previous or subsequent track played (direct search) (track skip) Select the number of the track to be played directly by pressing Advancing to a subsequent track the numeric buttons (0 to 9) on the player or remote control EASY JOG unit. To select track number 10 or above, use the numeric buttons QUICK REPLAY to select the higher digit first and then select the lower digit. Once the number of the track
ページ20に含まれる内容の要旨
ENGLISH BASIC OPERATIONS The search (backward search) mode is established by holding Playing a specific part of a specific track down the button on the player or remote control unit. During MP3 file play, play returns to the album title which is • Using the index function (index skip) equivalent to the number of times the button has been pressed. Holding down the button initiates a backward search. (Returns SCROLL/ TEXT MENU ENTER RECALL during backward searches are not constant.) INDEX Q. REP
