ページ1に含まれる内容の要旨
Model PMD351 User Guide
Combination Stereo Cassette Deck/CD Player
CLASS 1 LASER PRODUCT
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
ページ2に含まれる内容の要旨
WARNINGS CAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclam
ページ3に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality protective device. If replacement of the plug is required, be sure and safety standards. There are, however, some installation and the service technician has used a replacement plug specified operation precautions which you should be particularly aware of. by the manufacturer that has the same overload protection as the original plug. 1. Read Instructions – All the safe
ページ4に含まれる内容の要旨
ANTENNA WARNINGS LEAD IN WIRE Do not expose the equipment to rain or moisture. ANTENNA GROUND DISCHARGE CLAMP Do not remove the cover from the equipment. UNIT (NEC SECTION 810-20) Do not insert an ything into the equipment through ELECTRIC GROUNDING the ventilation holes. SERVICE CONDUCTORS EQUIPMENT (NEC SECTION 810-21) Do not cover the ventilation with any items such as tablecloths, newspapers, curtains, etc. GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM No open flame sources, such as
ページ5に含まれる内容の要旨
CONTROL AND CONNECTION DIAGRAMS 12 3 4 5 6 7 8 9 10 11 12 STEREO CASSETTE DECK / COMPACT DISC PLAYER PMD351 PROFESSIONAL PLAY PAUSE EJECT STOP PLAY PLAY DOLBY B-C NR NX PRO IR TAPE PLAY /PAUSE STOP/EJECT TAPE POWER PITCH CONT. REC/PAUSE MEMO RESET DUBB CASCADE B OFF C ON OFF CD TAPE + CD REV MODE ALC QUICK REVERSE DOLBY NR TAPE CD AUTOMATIC TAPE SELECT SYSTEM CD-RW PLAYBACK HP SELECT CD PITCH CONT. TIME REPEAT A-B PROGRAM BALANCE REC LEVEL PHONES LR 13 14 15 16 17 18 19 20 21 22 23 24 25 a b c
ページ6に含まれる内容の要旨
TABLE OF CONTENTS PRECAUTIONS WARNINGS CAUTIONS ..................................................................................................................... 2 IMPORTANT SAFETY INSTRUCTIONS ............................................................................................ 3 CONTROL AND CONNECTION DIAGRAMS .............................................................................................. 5 TABLE OF CONTENTS ............................................................
ページ7に含まれる内容の要旨
RC-5 REMOTE CONTROL COMPATIBILITY INTRODUCTION The PMD351 comes equipped with an RC-5 remote Thank you for selecting the Marantz Professional in and out port. Through the use of various remote PMD351 combination Stereo Cassette Deck/CD control options the major functions of the unit can be Player. Please read these operating instructions operated via wired or wireless remote control. carefully. We recommend that you read the entire user guide prior to connecting and operating the unit. ONE-TOUCH
ページ8に含まれる内容の要旨
MEMO button DOLBY HX PRO HEADROOM EXTENSION 6 Press the MEMO button to store a memory point The Dolby HX PRO system monitors the total amount into the counter memory. Once this point is set, of effective bias during recording and instantaneously compensates for any excess bias by reducing the the tape deck will rewind or fast forward until it deck’s bias signal level accordingly. The system reaches this point in the tape and will stop. To operates independently on each channel. HX PRO is cancel
ページ9に含まれる内容の要旨
mode, this function is used along with the NEXT/ PLAY PAUSE STOP PLAY PLAY SEARCH FAST FORWARD button to select the desired tracks to be played. Note: Automatic search operations cannot operate on TAPE the Tape and CD at the same time. g b c d e PLAY/PAUSE button Press the PLAY/PAUSE button to change b REVERSE PLAY button the CD player mode from CD play to CD pause Press the REVERSE PLAY button to engage or from CD pause to CD play. the tape deck into t
ページ10に含まれる内容の要旨
CD PITCH CONTROL buttons DOLBY NR switch 18 16 By pressing the CD player PITCH CONTROL The DOLBY NR switch allows for the encoding buttons, you can adjust the CD player playback or decoding of Dolby B or C Noise Reduction. pitch from -12% to +12% in 0.1% increments. When recording with Dolby Noise Reduction on, You can return the CD player to the normal select the type (B or C) of noise reduction speed position by pressing the center “0” desired and place the switch in the appropriate control. P
ページ11に含まれる内容の要旨
TRACK time indicator displays the playing time to flash. Pressing the PROGRAM button again f of the CD in four digits, representing minutes and will place the CD player in the single track play seconds. This display typically represents mode, and the track indicator will begin to flash. elapsed time of the track being played. When the Pressing the PROGRAM button again will return REM indicator is displayed, the time shown the CD player to the normal play mode. represents the remaining time of th
ページ12に含まれる内容の要旨
REAR PANEL CONNECTIONS FADER START jacks I Upon receiving a dry switch contact closure on MIC (MICROPHONE) INPUT jack the jack connections, the CD Player can be A For use with microphones as the input source switched in and out of play and play/pause into the tape deck. When microphones are mode. The Tape deck can be switched in and installed into these jacks, the line inputs are out of play and stop or the record and stop automatically switched off and only the micro- mode. phone signal is inpu
ページ13に含まれる内容の要旨
REVERSE PLAY button to begin recording in TAPE REWIND/FAST FORWARD Regardless of the direction that the tape transport is the reverse direction. When the tape enters into the playback mode the REC indicator and the play currently in, pressing the (Fast Forward) control control button indicator will change from the button will place the tape transport in the high speed flashing mode to the constant on mode. This fast forward mode and the tape will advance quickly indicates the tape transport is
ページ14に含まれる内容の要旨
SELECTING THE TRACK CD-R/CD-RW disc play 1. By pressing the CD-NEXT or the CD- In addition to conventional music CDs and CD-R PREVIOUS buttons, you can select the track to (recordable) discs, this player can also play CD-RW be played. Each press of the CD button will (rewritable) discs. It also supports the unfinalized advance the CD player to the beginning of the discs that cannot be played by regular CD players. next track and enter into the play/pause mode. Each press of the CD button wil
ページ15に含まれる内容の要旨
recorded by any recorder that complies with the "Orange book" of CD-R/CD-RW standards. Example play sequence as displayed in Windows Explorer: The player can play only those discs recorded in the Album 02 music format (CD-DA) or using MP3 files. Album 03 aaaa03.mp3 If there is not much recording time, it may be difficult aaaa04.mp3 for the data to be read, and it may cause an error. aaaa05.mp3 aaaa06.mp3 When the player is to play a CD-RW disc or Album 04 unfinalized CD-R/CD-RW disc, it automati
ページ16に含まれる内容の要旨
Precautions for discs recorded using MP3 Concerning random play files Random play proceeds on an album by album (folder by folder) basis. When all the tracks of the album The format of the files played have the “.mp3” or • currently playing have been played, play moves on to “.MP3” extension. Files with any other extension the next album in the sequence. During random play, cannot be played. the 1-track repeat and A-B repeat functions cannot be • The Joliet file system, an extension to the use
ページ17に含まれる内容の要旨
EXTENDED CASCADE OPERATION AUTOMATIC RECORD LEVEL By using the cascade feature on the PMD351 with TAPE DUBBING another PMD351 or other Marantz Professional 1. By pressing the CD STOP/EJECT button and the products offering the cascade feature, several units tape eject button, you can load the CD to be can be connected to supply long playback or recording dubbed onto the CD tray and a recordable tape functionality. into the tape transport. Gently press the front of each mechanism to close them. Th
ページ18に含まれる内容の要旨
middle of an operation, the cassette tape remains 5. Begin the recording of the first source by pressing loaded and it may be impossible to eject. In such a the play control button. The unit will enter record case, turn the power on; enter PLAY mode; press mode. After the first source has completed record- STOP; and then eject the tape. The same caution as ing, the next component in the cascade will begin above applies in case of power failure. To prevent recording. This will continue until the
ページ19に含まれる内容の要旨
RS-232C control Hand shake flow charts for control commands: Connect a male (D-Sub 9 Pin) to female (D-Sub 9 Pin) PMD351 Typical Host straight cable for RS-232C external control by host equipment. Received Command • The RS-232C host can control all functions of the Status Command PMD351 externally • The PMD351 automatically transmits status data Host sends a command that causes a when status is changed. change in PMD351 status. • The PMD351 will respond to status requests by transmitting the ass
ページ20に含まれる内容の要旨
Response from TAPE Request Command for TAPE Status from TAPE Category Standby "@118POFF"+CR "@118POFF"+CR Standby "@1?18POWE"+CR Power Power Power On "@118PRON"+CR "@118PRON"+CR Power On IN "@118CAIN"+CR IN "@118CAIN"+CR Cassette "@1?18CASS"+CR Cassette Eject "@118CAEJ"+CR Eject "@118CAEJ"+CR Stop "@118STOP"+CR "@118STOP"+CR Stop Play FW "@118PLFW"+CR "@118PLFW"+CR Play FW Play REV "@118PLRV"+CR "@118PLRV"+CR Play REV Play Mode Pause "@118PASE"+CR "@118PASE"+CR Pause Play FF "@118FASF"+CR "@1?18
