ページ1に含まれる内容の要旨
®
CD AUDIO SYSTEM
WITH DIGITAL RADIO & BASS REFLEX
SPEAKERS
MODEL SL-328
OPERATING INSTRUCTIONS
DIGITAL RADIO WITH PRESETS
PLAYS MUSIC COMPACT DISCS
FULLY PROGRAMMABLE CD PLAYER WITH REPEAT PLAY
RECEIVES AM/FM STEREO BROADCASTS
RECORDS CASSETTES FROM CD OR RADIO
AC POWER INDICATOR
LARGE BACKLIT LCD DISPLAY FOR CD & RADIO
PRESET GRAPHIC EQUALIZER SYSTEM
BASS REFLEX SPEAKER SYSTEM
PLEASE READ CAREFULLY BEFORE USE
IB-SL328-SY-WM-E-120801
ページ2に含まれる内容の要旨
WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with WARNING: TO REDUCE THE The exclamation point within arrowhead symbol, within an RISK OF ELECTRIC SHOCK, an equilateral triangle is equilateral triangle, is DO NOT REMOVE
ページ3に含まれる内容の要旨
ADDITIONAL SAFETY INSTRUCTIONS 1. Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 2. Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling. 3. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. 4. Servicing - The user should not attempt to service the appliance bey
ページ4に含まれる内容の要旨
CONNECTING THE SPEAKERS AND ANTENNAS Carefully unwind and stretch out the speaker wire on the back of each speaker box and plug the right plug into Speaker Jack marked R , and the left plug into Speaker Jack marked L . FM ANTENNA AM ANTENNA SOCKET AC CORD AM LOOP ANTENNA Unwind the FM ANTENNA (thin wire) at the back of the set and straighten it out for FM reception; for AM reception, please use the AM LOOP ANTENNA and plug its wire into the AM ANTENNA SOCKET at the back of the set, then po
ページ5に含まれる内容の要旨
REMOTE CONTROL You can control the player with the provided REMOTE control. 1. MUTE 1 8 2. TAPE 2 9 3. BAND 3 10 4. CD REPEAT/RADIO PRESET 4 11 5. RADIO TUNING DOWN/CD BACKWARD SKIP 5 12 6. STOP 6 13 7. VOLUME DOWN 8. POWER 7 14 9. CD 10. RADIO 11. CD PROGRAM/RADIO STORE 12. RADIO TUNING UP/CD FORWARD SKIP 13. CD PLAY/PAUSE 14. VOLUME UP Slide the battery cover to remove. Insert two size AAA batteries (not included) correctly so that the + and - polarities match the polarity
ページ6に含まれる内容の要旨
CLOCK SETTING 3&5 NOTE: If the POWER switch is ON and you want to set the time, press the TAPE switch first, and then follow the listed steps to 2,4&6 set the clock. Connect the AC power cord (see page 3). Once the set is connected with the 1 AC power, the display will show as AM right: HOUR MINUTE Press the PROGRAM(STORE) 2 switch, the hour digits will flash for AM 10 seconds. Press the TIME/TUNING 3 switches to select the correct hour time. Observe the AM & PM AM indicators, advance the time
ページ7に含まれる内容の要旨
PLAYING A CD 5 STANDBY INDICATOR 1 3&4 2 6 Connect the AC power cord (see page 3). Press the POWER switch, the AC 1 POWER STANDBY INDICATOR will go off and the display will light up. Press the CD switch, the display TRACK 2 will show six zeros 0. Press the CD DOOR OPEN/CLOSE 3 button to open the CD DOOR and place the disc in the CD compartment. The label side of the CD should face outward. Close the CD DOOR by pressing 4 TRACK the CD DOOR OPEN/CLOSE button again. The display will show the t
ページ8に含まれる内容の要旨
USE THESE BUTTONS FOR ADDITIONAL OPERATIONS CD DOOR OPEN/CLOSE TRACK POWER VOLUME + VOLUME - TIP When CD play is paused, the To Press or Adjust elapsed playing time will flash and VOLUME + or VOLUME - button Adjust the volume no music will play. Stop playback STOP button To resume play, PAUSE button press the PAUSE button again, the The elapsed playing time will Pause playback elapsed playing flash during pause. Press again time will stop to resume play after pause. flashing and music Go to the
ページ9に含まれる内容の要旨
REPEAT PLAY PLAYING CD SONGS (TRACKS) OVER AND OVER You can play CD tracks over and over in normal or programmed play modes (see page 9). POWER REPEAT PROGRAM GRAPHIC CD FUNCTION EQUALIZER SWITCH 1. Press the POWER switch, the AC POWER STANDBY INDICATOR will go off. 2. Press the CD switch. 3. Select the track by pressing or , and then press . 4. Press the CD REPEAT button. To repeat Press Display shows a single track (song) Press the REPEAT button twice REPEAT Flashing REP
ページ10に含まれる内容の要旨
SELECTING YOUR OWN MUSIC PLAYING ORDER (Programmed Play) You can make a program of up to 20 tracks in the order you want them to be played. NOTE: Programming is only done during stop mode. POWER PROGRAM During STOP mode, press the MEMORY 1 PROGRAM (STORE) button. The TRACK display will show , MEMORY and TRACK will flash in the display. MEMORY Press the SKIP/SEARCH buttons 2 TRACK either or until the desired track shows in the display. MEMORY Press the PROGRAM button. The 3 TRACK di
ページ11に含まれる内容の要旨
LISTENING TO THE RADIO 4 1 6 3 2 Connect the AC power cord (see page 3). Press the POWER switch, the AC POWER 1 STANDBY INDICATOR will be off. Press the RADIO switch. 2 Press the BAND switch to choose the 3 proper band (AM or FM ) that you want. Tune into the station you prefer using the TUNING UP or DOWN button. 4 Each time the button is pressed, the frequency changes. Keep the button pressed, the station will change rapidly (automatic tuning), release the button and it will stop at the next st
ページ12に含まれる内容の要旨
PRESETTING RADIO STATIONS Allows you to store your favorite stations for quick one button tuning. 3 2&4 Connect the AC power cord (see page 3). Follow Steps 1 to 4 (LISTENING TO 1 THE RADIO on the previous page) to select a station. Press the PROGRAM (STORE) STEREO 2 CH switch, CH will show and FM MHz MEMORY will flash in the display for about 5 seconds. While the MEMORY is flashing, STEREO 3 press the PRESET (REPEAT) CH button to choose a memory location FM MHz (01-20). Press the PROGRAM
ページ13に含まれる内容の要旨
LISTENING TO THE PRESET STATIONS (after you programmed them) Connect the AC power cord (see page 3). Press the POWER switch, the 1 dial will light. Press the RADIO switch. 2 Press the AM/FM BAND 3 switch to select the desired band. 1 Press the PRESET (REPEAT) 4 4 switch several times to choose a memory location 3 2 (01-20). You will receive the station you stored into that preset memory location. USE THESE BUTTONS FOR ADDITIONAL OPERATIONS Press or Adjust To VOLUME + or 1. Adjust the volume VOLU
ページ14に含まれる内容の要旨
PLAYING A TAPE 1 2 INSERT THIS WAY 4 3 Connect the AC power cord (see page 3). Press the POWER switch, 1 the dial will light up. Press the TAPE switch. 2 Press the STOP/EJECT 3 button to open the tape compartment and insert a recorded tape as shown. Close the door. 4 Press the PLAY button. The player turns on and starts playing. When the set finishes playing this side of the tape, 5 AUTO STOP the set will stop. To hear the other side of the tape, flip the tape over, then insert and press PLAY.
ページ15に含まれる内容の要旨
USE THESE BUTTONS FOR ADDITIONAL OPERATIONS AC POWER STANDBY INDICATOR MUTE INDICATOR VOLUME + & VOLUME - EQUALIZER HEADPHONE JACK PLAY STOP/EJECT PAUSE REWIND & FAST FORWARD To Press or Adjust VOLUME + or VOLUME - switch Adjust the volume Get different sound effect EQ switch Stop playback STOP button FAST FORWARD button or Fast forward or rewind REWIND button the tape PAUSE button Pause playback Press again to resume play after pause. Eject the cassette STOP button To enjoy the music Insert yo
ページ16に含まれる内容の要旨
RECORDING ON A TAPE INSERT THIS WAY 3 1 Connect the AC power cord (see page 3). Press the STOP/EJECT button 1 to open the tape compartment and insert a blank tape. Select the program source (AM, FM or CD) you want to record. To record from the CD player, 2 insert a CD and follow the steps to play a CD (see page 6). To record from a radio, press the RADIO switch, select AM or FM band and tune into the station you want (see page 10). Press the RECORD button to 3 start recording. (The PLAY button
ページ17に含まれる内容の要旨
USE THESE BUTTONS FOR ADDITIONAL OPERATIONS TIP •To erase a recording, just start STOP/EJECT PAUSE a new recording, and the old one is To Press or Adjust automatically replaced. Stop recording STOP/EJECT button Pause recording PAUSE button Press the button again to resume recording. Turn off the player Press the STOP/EJECT button and press the POWER switch to off, the AC POWER STANDBY INDICATOR will go on. NOTE: If the PLAY button pops up, your tape may have reached the end, reverse the tape or
ページ18に含まれる内容の要旨
PRECAUTIONS On Operation On Safety As the laser beam used in the CD If the player is brought directly from a player section may be harmful to the cold to a warm location, or is placed eyes, do not attempt to disassemble in a very damp room, moisture may the cabinet. Refer servicing to condense on the lens inside the CD qualified personnel only. player section. Should this occur, the player will not operate properly. In Should any solid object or liquid fall this case, remove the CD and
ページ19に含まれる内容の要旨
PRECAUTIONS (continued) Notes on CDs Notes on Cassettes Before playing, clean the CD with a Break off the cassette tab from side A cleaning cloth. Wipe the CD from the or B to prevent accidental recording. center out. Side A Do not use solvents such as benzene, Tab for side A thinner, commercially available Tab for side B cleaners or anti-static spray intended for vinyl LPs. Do not expose the CD to direct To record on a tape with its tab broken sunlight or heat sources such as hot o
ページ20に含まれる内容の要旨
MAINTENANCE Cleaning the Lens Notes for Storing If the lens becomes dirty, it may cause a Cassette Tapes skipping of sound during CD operation. 1. Do not put a tape near a magnetic Clean with a commercially available lens field, such as a TV, or speaker. cleaner and blower. Magnetic fields may reduce the tape sensitivity or even erase the recording. 2. Do not store tape for any length of time in a hot, moist or dusty place. Cleaning the Tape Heads Wipe the heads, the pinch roller and the capstan
