ページ1に含まれる内容の要旨
®
COMPACT DISC PLAYER
AM/FM/TV1/TV2 (WEATHER) BAND STEREO CASSETTE RECORDER
MODEL CD-103/BP-103
OPERATING INSTRUCTIONS
PLAYS MUSIC COMPACT DISCS
FULLY PROGRAMMABLE CD PLAYER WITH REPEAT
RECEIVES TV BAND AND WEATHER BAND
RECEIVES AM/FM BROADCASTS
RECORDS FROM CD, RADIO, OR BUILT-IN MICROPHONE
FM STEREO AND POWER LED INDICATORS
2 WAY POWER - AC/DC
REQUIRES 6 SIZE C BATTERIES (not included)
PLEASE READ CAREFULLY BEFORE USE
IB-CD103(SY)-WM-E-053002
ページ2に含まれる内容の要旨
WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with WARNING: TO REDUCE THE The exclamation point within arrowhead symbol, within an RISK OF ELECTRIC SHOCK, an equilateral triangle is equilateral triangle, is DO NOT REMOVE
ページ3に含まれる内容の要旨
ADDITIONAL SAFETY INSTRUCTIONS 1. Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 2. Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling. 3. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. 4. Servicing - The user should not attempt to service the appliance bey
ページ4に含まれる内容の要旨
BATTERY SAFETY INSTRUCTIONS CAUTION: TO REDUCE THE RISK OF FIRE OR PERSONAL INJURY OR DAMAGE TO YOUR SET, READ AND FOLLOW THESE INSTRUCTIONS. 1. Use only the type and size of batteries mentioned in the operating instructions manual (batteries are not included with this set, please buy the proper batteries). 2. Do not dispose the batteries into a fire. The cells may explode. Check with local codes for possible special disposal instructions. 3. Do not open or mutilate the batteries. Released elect
ページ5に含まれる内容の要旨
CHOOSING THE POWER SOURCES You can use the AC power or batteries as a power source. AC SOCKET To a wall outlet NOTE: One blade of plug and outlet is wider. Battery compartment 1. Connecting the AC power Tip cord If the plug of the AC power Insert one end of the supplied AC power cord into cord does not match your the socket located at the rear of the player, and the outlet, do not force it. other end to the wall outlet. Reverse it and try again. This plug is polarized and only fits one way in
ページ6に含まれる内容の要旨
PLAYING A CD 2 & 3 1 4 Connect the supplied AC power cord or batteries (see page 4). Slide the FUNCTION switch to CD position POWER 1 (power on), the POWER lamp lamp will be on. And the display will show 2 dashes flashing , then . Lift the right corner of the 2 CD DOOR to open it and place the CD in the CD compartment. The label side of the CD should face upward. Close the CD DOOR by POWER 3 pushing it down. The lamp display will show the total tracks on that CD. Press the CD
ページ7に含まれる内容の要旨
USE THESE BUTTONS FOR ADDITIONAL OPERATIONS OPEN THE CD DOOR FUNCTION SWITCH BY LIFTING HERE VOLUME CONTROL PLAY/PAUSE STOP Track number TIP BACKWARD FORWARD When CD play is paused, the PLAY/ To Press or Adjust PAUSE lamp will flash and no music Adjust the volume VOLUME control will play. Stop playback STOP To resume play, press the PAUSE PLAY/PAUSE button again, the The PLAY lamp will flash Pause playback PLAY lamp will stop during pause. Press again flashing and music to resume play after paus
ページ8に含まれる内容の要旨
LISTENING TO THE RADIO 2 1 3 4 Connect the supplied AC power cord or batteries (see page 4). Slide the FUNCTION switch to RADIO 1 position, the POWER lamp will be on. Slide the BAND switch to the proper band position (AM, FM, or TV1, TV2 (WEATHER WEATHER 2 BAND)) that you want. Select AM to tune AM radio stations. Select FM to tune FM radio stations. Select TV1 to tune TV channels 2 through 6. Select TV2 to tune TV channels 7 through 13, including WEATHER BAND. 3 T U N Tune into the station yo
ページ9に含まれる内容の要旨
USE THESE BUTTONS FOR ADDITIONAL OPERATIONS FUNCTION SWITCH VOLUME CONTROL TIP To Slide or Adjust Next time you want to • listen to the radio, just Adjust the volume VOLUME control slide the FUNCTION switch to RADIO.The player automatically Slide the FUNCTION Turn off the Radio starts playing the pre- switch to TAPE position viously tuned station. To improve broadcast reception Change position of the antenna for FM,TV1 or TV2 (WEATHER BAND). Move the set itself for AM. 8 IB-CD103(SY)-WM-E-053002
ページ10に含まれる内容の要旨
PLAYING A TAPE 3 2 1 Connect the supplied AC power cord or batteries (see page 4). TAPE PLAY DIRECTION Slide the FUNCTION 1 switch to TAPE position. A EMPTY FULL REEL REEL STOP/EJECT Press the STOP/EJECT button to open the tape 2 / compartment and insert INSERT TAPE THIS WAY FULL REEL ON RIGHT a recorded tape. Close the door. PLAY Press the PLAY button. The player turns on and 3 starts playing. OK NO When the set finishes playing this side of the AUTO STOP 4 tape, the set will stop. To hear th
ページ11に含まれる内容の要旨
USE THESE BUTTONS FOR ADDITIONAL OPERATIONS VOLUME CONTROL MICROPHONE PAUSE STOP/EJECT PLAY PHONES JACK FAST F.&REWIND To Press or Adjust Adjust the volume VOLUME control Stop playback STOP/EJECT button Fast forward or rewind FAST FORWARD button or the tape REWIND button PAUSE button Pause playback Press again to resume play after pause. Eject the cassette STOP/EJECT button To enjoy the music Insert your headphone plug into without disturbing others the PHONES jack. Make sure cassette buttons ar
ページ12に含まれる内容の要旨
RECORDING ON A TAPE 1 3 Connect the supplied AC power cord or batteries (see page 4). Press the STOP/EJECT button to STOP/EJECT TAPE PLAY DIRECTION open the tape compartment and 1 insert a blank tape. Select the / program source (AM, FM, TV1, A TV2, CD, or, built-in microphone) you want to record. EMPTY FULL To record from the CD player, insert REEL REEL 2 a CD and follow the steps to play a INSERT TAPE THIS WAY CD (see page 5). FULL REEL ON RIGHT To record from the radio, slide the FUNCTION sw
ページ13に含まれる内容の要旨
USE THESE BUTTONS FOR ADDITIONAL OPERATIONS FUNCTION SWITCH TIP • For best recording effect, use the AC power instead of STOP/EJECT PAUSE batteries. To Press or Adjust •To erase a recording, just start Stop recording a new recording, STOP/EJECT button and the old one is automatically PAUSE button Pause recording replaced. Press the button again to resume recording. Press the STOP/EJECT Turn off the power button and slide the FUNCTION switch to TAPE position. 12 IB-CD103(SY)-WM-E-053002
ページ14に含まれる内容の要旨
PLAYING CD TRACKS REPEATEDLY (REPEAT PLAY) You can play CD tracks over and over in normal or program play modes (see page 14). FUNCTION SWITCH REPEAT BUTTON PROGRAM BUTTON 1. Slide the FUNCTION switch to CD position. 2. Select the track by pressing or , and then press . 3. Press the CD REPEAT button. To repeat Press Display shows PLAY/ Press the REPEAT button PAUSE a single track (song) once, the REPEAT lamp will PROGRAM flash. REPEAT PLAY/ Press the REPEAT button PAUSE all th
ページ15に含まれる内容の要旨
PLAYING CD TRACKS IN PROGRAMMED ORDER Programmed Play You can make a program of up to 16 tracks in the order you want them to be played. PROGRAM 1. Slide the FUNCTION switch to CD position. Make sure the CD is stopped. PLAY/ PAUSE 2. Press the PROGRAM button. The letters PROGRAM and the PROGRAM lamp will flash. REPEAT 3. Press or to select the tracks you want to program in the order you want. 4. Press the PROGRAM button to confirm. The letters will flash and the PROGRA
ページ16に含まれる内容の要旨
PRECAUTIONS On Power Sources On Safety As the laser beam used in the CD For battery operation, use 6 size C batteries. We recommend alkaline player section may be harmful to the eyes, do not attempt to disassemble batteries for longer life. the cabinet. Refer servicing to When the batteries will not be used qualified personnel only. for a few weeks or more, remove them to avoid damage that can be caused Should any solid object or liquid fall by battery leakage or corrosion. into the p
ページ17に含まれる内容の要旨
PRECAUTIONS (continued) Notes on CDs Notes on Cassettes Before playing, clean the CD with a Break off the cassette tab from side A cleaning cloth. Wipe the CD from the or B to prevent accidental recording. center out. Side A Tab for side A Do not use solvents such as benzene, Tab for side B thinner, commercially available cleaners or anti-static spray intended To record on a tape with its tab broken for vinyl LPs. off, cover the respective tab hole for Do not expose the CD to direct s
ページ18に含まれる内容の要旨
MAINTENANCE Cleaning the Lens Notes for Storing If the lens becomes dirty, it may cause a Cassette Tapes skipping of sound during CD operation. 1. Do not put a tape near a magnetic Clean with a commercially available lens field, such as a TV, or speaker. cleaner and blower. Magnetic fields may reduce the tape sensitivity or even erase the recording. 2. Do not store tape for any length of time in a hot, moist or dusty place. Cleaning the Tape Heads Wipe the heads, the pinch roller and the capstan
ページ19に含まれる内容の要旨
TROUBLE SHOOTING Remedy Problem Connect the AC power cord to a wall outlet securely. The power is not on. Make sure the batteries are inserted correctly and they are fresh. Make sure the FUNCTION switch is in the correct position. There is no sound. Adjust the volume. Unplug the headphones when listening through speakers. Make sure that the CD compartment is closed. Place the CD with the label side up. Clean the CD. Take out the CD and leave the CD DOOR open for CD does not play
ページ20に含まれる内容の要旨
SPECIFICATION General Description Power source: AC 120V, 60Hz 12 Watts DC 9V (6 size C batteries) (Alkaline batteries are recommended) 1 Speakers: 2 - 3 / 8 ohm 2 Output power: 1.5W/channel 1 Dimensions: Width: 14 / 2 Depth: 8 3 Height: 6 / 4 Weight: 5LBs (without batteries) CD Section Plays disc type: Any normal CD used in portable players Laser wavelength: 760 - 800 NM Tracking method: 3 - spot error detection 3.86 mm lens Frequency response: 50Hz - 15kHz +1/-2dB NO
