ページ1に含まれる内容の要旨
®
COMPACT DISC PLAYER
MW/FM DUAL CASSETTE RECORDER
WITH REMOTE CONTROL
MODEL CD-511
OPERATING INSTRUCTIONS
INCLUDES FULL FEATURE REMOTE CONTROL
MULTI-COLOURED FLUORESCENT DISPLAY
PLAYS MUSIC COMPACT DISCS
SING ALONG WITH KARAOKE
FULLY PROGRAMMABLE CD PLAYER WITH REPEAT PLAY
FUNCTION
RECEIVES MW/FM STEREO BROADCASTS
ROTARY BASS & TREBLE CONTROLS
RECORDS FROM CD, TAPE OR RADIO
2 WAY POWER - AC/DC
REQUIRES 8 X LR20 (SIZE D ) BATTERIES (NO INCLUDED)
PLEASE READ CAREFULLY BEFOR
ページ2に含まれる内容の要旨
W WARNINGS ARNINGS The exclamation mark within a triangle is a warning sign alerting the user of important instructions accompanying the product. The lightning flash with arrowhead symbol within a triangle is a warning sign alerting the user of dangerous voltage inside the player. CAUTION To reduce the risk of electric shocks, do not remove the cover. No user- RISK OF ELECTRIC SHOCK serviceable parts inside the player. Refer all servicing to qualified DO NOT OPEN personnel. CLASS 1 This player
ページ3に含まれる内容の要旨
BATTERY SAFETY INSTRUCTIONS CAUTION: TO REDUCE THE RISK OF FIRE, PERSONAL INJURY OR DAMAGE TO THE PLAYER, PLEASE READ AND FOLLOW THESE INSTRUCTIONS. 1. Use only the type and size of batteries stated in the operating instructions booklet (Batteries are not included with the player. Please buy the correct batteries). 2. Do not dispose of the batteries by burning them as they may explode. Check with local regulations for any special instructions on the disposal of batteries. 3. Do not open or dis
ページ4に含まれる内容の要旨
CHOOSING A POWER SOURCE AC power or batteries may be used as a power source. AC SOCKET 1. Connecting the AC power TIP cord Replace the batteries Insert one end of the supplied AC power cord (located when the display dims or in the polyfoam) into the socket located at the back when the player stops of the player, and the other end into a wall outlet. operating. Replace all batteries with new ones. 2. Using battery power Before replacing Insert 8 X LR20 (size D) batteries (not included) batter
ページ5に含まれる内容の要旨
ATTACHING THE SPEAKERS 1.Position one of the speakers to the right of the main unit. PROG. 2.Align the tracks (rails) on the speaker with the main unit as shown in FIG. 1. FIG.1 3.When the speaker tracks (rails) are lined up, push the speaker into the tracks (rails) on the main unit as shown in FIG. 2. PROG. 4.Repeat steps 1 to 3 above for the left side. FIG.2 5.Carefully unwind the speaker wire from behind each speaker and insert the right plug into Speaker Jack R and the left plug into Speaker
ページ6に含まれる内容の要旨
“AAA” REMOTE CONTROL The CD PLAYER can be operated with the REMOTE CONTROL provided (includes the following controls: POWER ON/OFF, MUTE, VOLUME, CD REPEAT and PLAY). NOTE: When you use the REMOTE CONTROL to operate the CD PLAYER, make sure the POWER button on the main unit is turned on. Otherwise, the REMOTE CONTROL will not work. 1. POWER ON/OFF 2. MUTE 9 3. REPEAT - ONE & ALL SONGS 1 4. PROGRAMME 5. VOLUME UP/DOWN 8 6. SKIP/SEARCH BACKWARD 2 7. SKIP/SEARCH FORWARD 8. STOP 3 7 9. PLAY/
ページ7に含まれる内容の要旨
PLAYING A CD 5 3 1 2 6 PROG. Connect the supplied AC power cord or batteries (see page 3). Press the POWER button for the 1 VFD display and AUDIO LEVEL to come on. Slide the FUNCTION switch to the 2 CD position. Two dashes, -- , will appear on the VFD display. Open the CD DOOR by pressing the bottom righthand corner of the CD 3 door marked OPEN/CLOSE and OPEN CLOSE CLOSE place the CD in the CD compartment. The label side of the CD should face upward. Close the CD DOOR by pushing it 4 down. The
ページ8に含まれる内容の要旨
USE THESE BUTTONS FOR ADDITIONAL OPERATIONS VOLUME CONTROL TIP The AUDIO LEVEL will light up when the power is on and PROG. the pointer will indicate any changes in audio levels. TIP When CD play is paused, will flash and the CD FUNCTION SWITCH will stop playing. To Press or Adjust Adjust the volume VOLUME control STOP Stop playback To resume play, press the PAUSE PLAY/PAUSE button again, will flash when a CD is in Pause playback will stop flashing pause mode. Press again to and
ページ9に含まれる内容の要旨
REPEAT PLAY PLAYING CD SONGS (TRACKS) REPEATEDLY CD tracks can be played over and over again in either normal or programmed play mode (see page 9). (NOTE: To use this feature, you need to operate the set with the REMOTE CONTROL, because there is no REPEAT button on the main unit.) POWER BUTTON REPEAT FUNCTION SWITCH 1. Press the POWER button for the display to light up. 2. Set the FUNCTION switch to the CD position. 3. Select the track by pressing or , and then press . 4.
ページ10に含まれる内容の要旨
PROGRAMMED CD PLAY SELECTING YOUR OWN MUSIC PLAYING ORDER PROGRAMME Up to 19 tracks may be programmed to play in whatever order you wish. NOTE: Programming is only done during STOP mode. During STOP mode, press the 1 PROGRAMME button. and PRG. will flash in the display. Press the SKIP/SEARCH 2 , buttons, or until the desired track shows in the display. Press the PROGRAMME button. 3 and PRG. will flash in the display. Repeat steps 2 and 3 until all the 4 desired tracks are progr
ページ11に含まれる内容の要旨
LISTENING TO THE RADIO 1 3 2 4 3 PROG. 6 Connect the supplied AC power cord or batteries (see page 3). Press the POWER button for the VFD 1 display and the AUDIO LEVEL to come on. Set the FUNCTION switch to the RADIO position. 2 Set the BAND switch to the proper 3 band position (MW or FM), and the FM MODE switch to STEREO or MW FM MONO. Tune into the station of your choice using the TUNING control. Adjust for 4 the clearest sound. FM ST. will appear in the VFD display when receiving FM
ページ12に含まれる内容の要旨
USE THESE BUTTONS FOR ADDITIONAL OPERATIONS VOLUME FM MODE FUNCTION PROG. TIP To Press or Set If an FM broadcast is • noisy, move the FM Adjust the volume VOLUME control (UP or MODE switch from DOWN). STEREO to MONO. Set the FUNCTION switch Turn off the Radio to the TAPE position or This player has an • press the POWER button. electronic volume control. The volume can be raised or To improve broadcast reception lowered by pressing Change position of the antenna for FM or FM Stereo. the VOLUME UP
ページ13に含まれる内容の要旨
PLAYING A TAPE 1 2 PROG. 4 3 Connect the supplied AC power cord or batteries (see page 3). Press the POWER 1 button for the VFD display to come on. FU LL EMPTY RE EL REEL Set the FUNCTION 2 switch to the TAPE position. Press the STOP/EJECT STOP/EJECT IN SERT THIS WAY 3 button (DECK A or DECK B) to open the tape compartment and insert a recorded tape. Close the door. PLAY Press the PLAY button. 4 The player will come on and start playing the tape. When the player comes AUTO STOP 5 to the end of o
ページ14に含まれる内容の要旨
RELAY PLAY 2 1 PROG. 5 4 3 Connect the supplied AC power cord or batteries (see page 3). To play tapes in DECK A and then DECK B, follow the steps below: Press the POWER button for the VFD 1 display and AUDIO LEVEL to come on. Set the FUNCTION switch to the TAPE 2 position. Press the cassette PLAY button on PLAY 3 DECK A for the tape in DECK A to play. Press the cassette PAUSE button on PAUSE 4 DECK B. Press the cassette PLAY button on PLAY DECK B. When DECK A finishes playing, 5 DECK B will au
ページ15に含まれる内容の要旨
USE THESE BUTTONS FOR ADDITIONAL CASSETTE TAPE OPERATIONS VOLUME CONTROL PROG. PAUSE PLAY PAUSE PLAY STOP/EJECT STOP/EJECT RECORD FAST F.&REWIND FAST F.&REWIND To Press or Adjust Press the VOLUME button Adjust the volume (UP or DOWN) Stop playback STOP/EJECT button Fast forward or rewind FAST FORWARD button or REWIND button PAUSE button Pause playback Press again to resume play Eject the cassette STOP/EJECT button To enjoy music without Insert your headphone plug disturbing others into the HEADP
ページ16に含まれる内容の要旨
RECORDING ONTO A TAPE 1 PROG. 3 MICROPHONE JACK 4 2 Connect the supplied AC power cord or batteries (see page 3). Press the POWER button for the VFD display and AUDIO 1 LEVEL to come on. Press the STOP/EJECT button (DECK STOP/EJECT 2 B) to open the tape compartment and insert a blank tape. Select the source (MW, FM, CD, or microphone) you wish OK NO to record from. To record from the CD player, set the FUNCTION switch to the CD position, insert a CD and follow the steps for playing 3 a CD (see
ページ17に含まれる内容の要旨
USE THESE BUTTONS FOR ADDITIONAL OPERATIONS PROG. TIP DOUBLE SPEED SWITCH PAUSE • For best recording STOP/EJECT effect, use AC power instead of batteries. • To erase a recording, simply start a new To Press or Set recording, and the old one will auto- Stop recording STOP/EJECT button matically be erased. Pause recording PAUSE button • See page 20 for Press the button again to notes on cassettes. resume recording. Adjust recording DUBBING SPEED speed when copying switch from NORMAL to tapes HIGH
ページ18に含まれる内容の要旨
SING ALONG WITH KARAOKE FUNCTION VOLUME PROG. MIC VOLUME MICROPHONE JACK 2 Connect the supplied AC power cord or batteries (see page 3). Insert the microphone plug into the microphone 1 jack. To avoid howling from the microphone, lower the volume level first. NOTE: Microphone is not included. You can purchase one at the shop where you purchased your player. To sing along with the CD player, set the FUNCTION 2 switch to the CD position, insert a KARAOKE CD disc and follow the steps for playing a
ページ19に含まれる内容の要旨
USE THESE BUTTONS FOR ADDITIONAL OPERATIONS PROG. VOLUME MIC VOLUME BASS TREBLE CONTROL To Press or Adjust Adjust the MIC volume MIC. VOLUME Adjust the CD or TAPE VOLUME control volume Adjust the sound effect BASS or TREBLE for low or high tones. control. TIP: If any squealing or howling (feedback) occurs during KARAOKE use, move the microphone away from the speakers or turn down the volume. 18 IB-CD511(TA)-SW-E-091002
ページ20に含まれる内容の要旨
PRECAUTIONS Power Sources Safety The laser beam used in the CD player For battery operation, use 8 X LR20 section could damage your eyes so (size D) batteries (not included). We you should never attempt to take the recommend alkaline batteries for cabinet apart. Refer servicing to longer life. qualified personnel only. When the batteries will not be used If any solid object or liquid gets into for several weeks or more, they should the player, unplug it, and have it be removed to avo
