ページ1に含まれる内容の要旨
PROGRAMMABLE COMPACT DISC PLAYER
MODEL CD-566
OPERATING INSTRUCTIONS
PLAYS ALL MUSIC COMPACT DISCS, CD-R & CD-RW
•
• PUSH BUTTON ELECTRONIC VOLUME CONTROL
6 DIGIT LCD VISUAL DISPLAY
•
TRACK REPEAT & DISC REPEAT
•
DELUXE STEREO HEADPHONES INCLUDED
•
USES 2 SIZE “AA” BATTERIES (NOT INCLUDED)
•
PLEASE READ CAREFULLY BEFORE USE
IB-CD566(CDX35A-0A3)-WM-E-011905
IB-CD566(CDX35A-0A3)-WM-E-011905(MS).pmd 1 1/19/2005, 8:45 PM
ページ2に含まれる内容の要旨
LOCATION OF CONTROLS 1 14 2 3 13 4 5 12 1. BACKWARD SKIP BUTTON ( ) 11 2. FORWARD SKIP BUTTON ( ) 10 6 9 3. REPEAT BUTTON 7 8 4. PROGRAM BUTTON 5. LCD VISUAL DISPLAY 6. PLAY/PAUSE BUTTON ( ) 7. STOP & POWER OFF BUTTON ( ) 8. VOLUME BUTTON ( ) (DECREASES VOLUME) 9. VOLUME BUTTON ( ) (INCREASES VOLUME) 10. CD DOOR OPEN BUTTON 11. HEADPHONES JACK (PHONES) 12. AC ADAPTOR JACK (AC ADAPTOR NOT INCLUDED) 13. CD DOOR 14. BATTERY DOOR(AT THE BOTTOM OF THE SET) READ THIS IMPORTANT IN
ページ3に含まれる内容の要旨
POWER SOURCES Power your CD player by connecting an optional AC ADAPTOR or by inserting 2 size “AA” fresh alkaline batteries. 1.USING WITH BATTERIES Insert two size “AA” alkaline batteries according to the + and markings on the bottom of the set. NOTE: Player will not work, and batteries will be drained, if batteries are not inserted as shown on the bottom of the set. TIPS ON BATTERY USE Reversing polarities will damage the batteries and possibly this set. Be sure to • follow polarity ( + and
ページ4に含まれる内容の要旨
CD PLAYING 1 Load the disc. Push here LABEL SIDE UP Disc PRESS TO OPEN 2 Connect the headphones. STEREO HEADPHONES TO PHONES JACK 3 Press the PLAY/PAUSE button ( ) to turn on the set. TRACK NUMBER ELAPSED PLAYING CURRENTLY TI ME OF THE PLAYING CURRENT TRACK PLAY/PAUSE BUTTON 4 Adjust the volume. INCREASE DECREASE NOTE: The default volume level is 20, every time you turn off the CD player and play it again, the volume level will go back to 20, you can press the volume control (+ or -) buttons to
ページ5に含まれる内容の要旨
OTHER OPERATIONS Operation Press Display window shows To pause play PLAY/PAUSE button TRACK NUMBER PLAYING TIME CURRENTLY FLASHES PLAYING To release pause and resume play PLAY/PAUSE button TRACK NUMBER PLAYING TIME CURRENTLY ADVANCES PLAYING To stop play STOP button TOTAL TRACKS TOTAL PLAYING TIME Press the STOP button once and wait 30 seconds, or To turn off the power press STOP button twice quickly. To skip to the next once (or repeatedly) track(s) To skip to the previous once (or repeatedly
ページ6に含まれる内容の要旨
REPEAT, INTRO AND RANDOM PLAY You may have repeat, intro or random play using the REPEAT button. Press the RE- PEAT button several times, and the display will show the followings in turn: REPEAT 1 REPEAT ALL INTRO RANDOM NORMAL PLAY REPEAT SINGLE TRACK REPEAT x 1 Plays one song over and over till you press STOP. During play, select the song you want to repeat with either of the SKIP buttons ( or ), then press the REPEAT T button once, the symbol R
ページ7に含まれる内容の要旨
PROGRAMMED PLAY The tracks (songs) on the disc can be programmed (arranged in advance) to play in any order you prefer (up to 20 tracks can be programmed). Programming Example etc. Program Number 1 2 3 4 5 6 7 8 Track Number (song number) 3 5 8 1 2 4 1 1 etc. During programming, the symbol PROG (program) flashes in the display. To program songs to play in your preferred order, follow steps below: 1.Press the PROGRAM button. Program #2 will now show in the display, ready for your next selection o
ページ8に含まれる内容の要旨
MAINTENANCE Handling Compact Discs Cleaning the lens Dirty, scratched or warped discs may • A dirty lens will cause sound skipping. If cause skipping or noise. the lens is very dirty, the player may not Handle the disc only by the edges. To work. We suggest using a special • keep clean, do not touch its surface. cleaning disk (not included) available in most music and Hi-Fi stores. However, if you do not have one, you may use the instructions below. Discs should be stored in their cases • after
ページ9に含まれる内容の要旨
SAFETY PRECAUTIONS Do not take the set apart. The laser beam used in the set may harm your eyes. Refer servicing to qualified service personnel only. Do not insert pins or coins, clips, or any objects inside the set. This set is equipped with a safety device which automatically turns the laser beam off when the disc door is opened. Do not drop the set or subject it to strong shocks. Doing so could result in damage. Do not place the set in locations where the temperature is high, or in humid or d
ページ10に含まれる内容の要旨
IMPORTANT INFORMATION REQUIRED BY THE FCC Since the CD circuitry may cause interference to other radios nearby, switch this set off when not in use or move it away from the affected radios. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation. NOTE: This equipment has been te
ページ11に含まれる内容の要旨
TROUBLE SHOOTING Causes Solutions Symptoms Replace both batteries with fresh Batteries are weak (they Tracks do not alkaline batteries. Battery life with may test OK on tester but change or set does fresh batteries is about 8 hours for they are weak for CD not play normally. continuous CD play (rechargeable operation). batteries have 1/2 of that life). Replace both batteries with fresh Dead or weak batteries. ones. CD Player will not The optional AC Check the optional AC ADAPTOR turn on. ADAPTOR
ページ12に含まれる内容の要旨
TECHNICAL SPECIFICATIONS General Maximum output (stereo headphones)............ 20mW + 20mW Power Supply AC Adaptor Input .......................................... 120V/60Hz-4.5V, 600 mA DC Output (optional) DC ................................................................ 3V: Using 2 size “AA” alkaline batteries (not included) Set Dimensions (approximate) Width .......................................................... 5 5/8" Depth .......................................................... 6
