Contents Safety precautions 4 RDS features 30 Traffic Information Notes 5 Radio Text Scroll PTY (Program Type) About CDs 7 Program Type preset Changing Language for PTY Function About AAC, MP3 and WMA 8 CD/Audio file/External disc control Notes on Multi-function System 9 features 33 Playing CD & Audio file General features 10 Playing External Disc Power Fast Forwarding and Reversing Selecting the Source Track/File Search Volume Disc Search/Folder Search Attenuator Direct Track/File Search Audio
ページ3に含まれる内容の要旨
Menu system 42 Basic Operations of remote control 51 Menu System Accessories/ Installation Procedure 53 Security Code Touch Sensor Tone Connecting Wires to Terminals 54 Manual Clock Adjustment Date Adjustment Installation 56 Date Mode Synchronize Clock Removing the Unit 57 DSI (Disabled System Indicator) Selectable Illumination Troubleshooting Guide 58 Dimmer Contrast Adjustment Specifications 61 Display-reversing Setting Built-in Amp Setting Dual Zone System Setting B.M.S. (Bass Management Syst
ページ4に含まれる内容の要旨
Safety precautions About CD players/disc changers 2WARNING connected to this unit To prevent injury or fire, take the KENWOOD disc changers/ CD players released in following precautions: 1998 or later can be connected to this unit. • To prevent a short circuit, never put or leave any Refer to the catalog or consult your Kenwood metallic objects (such as coins or metal tools) dealer for connectable models of disc changers/ inside the unit. CD players. Note that any KENWOOD disc changers/ C
ページ5に含まれる内容の要旨
Notes • If you experience problems during installation, Before using this unit for the first time consult your Kenwood dealer. This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the • If the unit fails to operate properly, press the Reset (page 49). button. The unit returns to factory settings when the Reset button is pressed. • Press the reset button if the disc auto changer fails About ODD (Offset Dual Differ
ページ6に含まれる内容の要旨
Notes About "Media Manager" of PC application • "Media Manager" is recorded in the CD-ROM attached to this unit. • Refer to the attached installation manual for the installation method of "Media Manager". • Refer to the user’s manual recorded in the installation CD-ROM and Help of "Media Manager" for the operation method of "Media Manager". • The unit can play CD (hereafter called "ACDrive disc") created by "Media Manager". • Refer to the following site for the updated information of "Med
ページ7に含まれる内容の要旨
About CDs Handling CDs Removing CDs • Don’t touch the recording surface of the CD. When removing CDs from this unit pull them out horizontally. CDs that can’t be used • CDs that aren’t round can’t be used. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Do not stick tape etc. on the CD, or use a CD with • CDs with coloring on the recording surface or that tape stuck on it. are dirty can’t be used. • Th
ページ8に含まれる内容の要旨
About AAC, MP3 and WMA The playable AAC/MP3/WMA file (hereafter called The maximum number of characters for Audio file) and the media format has the following display limitation. The Audio file, which is not comforming File/Folder name: 128 characters to the specification, may not play normally, or the MP3 ID3 Tag/ WMA Contents property file and folder names may not display correctly. : 30 characters AAC song information: 60 characters • Attach the correct extension for the Audio file (AAC:
ページ9に含まれる内容の要旨
Notes on Multi-function System What is the Multi-function System? Real operational example of the Multi- Multi-function System shows the Multi-function function System display, allowing you to select various functions and Example: T urning ON/OFF the Random Play during settings. CD play. Functions available for the current source are 1. Show the Multi-function display of the Random displayed. Play. Press the [NEXT] button. Operational 1 Press the [NEXT] button to Show the Multi- Scan Rando
ページ10に含まれる内容の要旨
General features ATT NEXT ANG VOL TI SRC Control knob Release button ATT indicator Power • This unit automatically turns full power OFF after 20 Turning ON the Power minutes lapses in Standby mode in order to save the Press the [SRC] button. vehicle's battery. The time until full power OFF can be set in (page 48). • When the power is ON, the (page 42) is displayed as "CODE ON" or "CODE OFF". Turning OFF the Power Press the [SRC] button for at leas
ページ11に含まれる内容の要旨
Attenuator turns ON and OFF. 2 Enter Audio Setup mode When the Attenuator is ON, the "ATT" indicator Press the [VOL] knob for at least 1 second. blinks. 3 Select the Audio Setup item to adjust Press the [VOL] knob. Each time you press the knob, the item to be adjusted alternates between the items shown in Audio Control the table below. 1 Select the source to adjust 4 Setup the Audio item Press the [SRC] button. Turn the [VOL] knob. 2 Enter Audio Control mode Adjustment Item Display Range Pres
ページ12に含まれる内容の要旨
General features 12 3 Sound Field control item Subwoofer Output "X'Over" "HPF Front" "fc" Front High Pass Filter Frequency Turning the Subwoofer output ON or OFF. "SLP" Front High Pass Filter Slope Hold down on [AM] of the Control knob for at "HPF Rear"*¹ "fc" Rear High Pass Filter Frequency "SLP" Rear High Pass Filter Slope least 1 second. "LPF "fc" Subwoofer Low Pass Filter Frequency Each time you press the button, Subwoofer SubWoofer"*² "SLP" Subwoofer Low Pass Filter Slope output switches
ページ13に含まれる内容の要旨
DTA Front/DTA Rear 0 — 610 (cm) DTA Subwoofer • "Preset": Y ou can store an adjusted sound control Position Setting Front-Left/ Front-Right/ value by selecting "Memory". Refer to Front/ ALL (page 16). Also, you can recall it by selecting "Recall". Refer to (page 16). • When the "2ZONE" of
ページ14に含まれる内容の要旨
General features Top 40 "Top40" Equalizer Control Jazz "Jazz" 1 Select the source to adjust Press the [SRC] button. • User memory: 2 Show the Multi-function display The values set on the . appears. • Change each setting value with the (page Management system> (page 13). 9). First, select the speaker type with the Speaker setting. 3 Enter Equalizer
ページ15に含まれる内容の要旨
WOW Control Item Range Effect Middle/High/User/Through/Low • T o get the best sound, first set the Cabin Setting FOCUS OFF/1 — 9 and Speaker Select Front/Rear parameters using the TruBass Front OFF/1 — 4 (page 13). TruBass Rear OFF/1 — 4 6 Exit Equalizer Control mode SRS 3D OFF/1 — 4 Turn the [VOL] knob to select "Return". Press the [VOL] knob. • Effect: T ruBass, FOCUS and SRS 3D are all set to values shown in the table below. Effect TruBass FOCUS SRS 3D WOW Control
ページ16に含まれる内容の要旨
General features Bypass Control 4 Put in the memory Turn the [VOL] knob to select "Memory1" or Temorarily bypassing DSP (Digital Signal "Memory2". Processor) System. Press the [VOL] knob for at least 2 seconds. The "MEMORY" display blinks 1 time. 1 Select the source to adjust Press the [SRC] button. 5 Exit Memory mode Turn the [VOL] knob to select "Return". 2 Show the Multi-function display Press the [VOL] knob. Press the [NEXT] button repeatedly until "DSP" appears. Refer to
ページ17に含まれる内容の要旨
"Recall1": Recall the value put in "Memory1" by 2 Push the faceplate in until it clicks. (page 16). The faceplate is locked in place, allowing you to "Recall2": Recall the value put in "Memory2" by use the unit. (page 16). 7 Exit Memory Recall mode Turn the [VOL] knob to select "Return". Press the [VOL] knob. Theft Deterrent Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the Faceplate Faceplate Angle Adju
ページ18に含まれる内容の要旨
General features Display Type Selection 5 Exit display control mode Turn the [VOL] knob to select "Return". Changing the display mode. Press the [VOL] knob. 1 Show the Multi-function display Press the [NEXT] button repeatedly until • Change the inf ormation by the Display Type. Refer to "Display" appears. the page on the following table for the methods to Refer to (page alternate by the Display Type. 9). Display Type AB C D 1st text 1 — — 22 22 2 Enter displa
ページ19に含まれる内容の要旨
Select wallpaper manually 6 Select the graphic/ spectrum analyzer 1 Turn the wallpaper scan OFF. display part display Press the Control knob. Push the Control knob towards [4] or Each time you press the knob, the Wallpaper [¢]. scan is turned ON and OFF. Each time you press the button, the graphic 2 Select the wallpaper. display/ spectrum analyzer display alternates Push the Control knob towards [FM] or [AM]. between the displays shown in the table below. Each time you push the knob, the W
ページ20に含まれる内容の要旨
General features Display Type B In Audio file source Text Selection for Display Information Display Song title & Artist name "Title/Artist"* Selecting the text display. Album name & Artist name "Album/Artist"* Folder name "Folder Name" 1 Show the Multi-function display File name "File Name" Press the [NEXT] button repeatedly until File number & Play time "P-Time" "Display" appears. Clock "Clock" Refer to (page Date "Date" 9). 2 Enter display control mode In DAB
