ページ1に含まれる内容の要旨
CD-RECEIVER
KDC-W7534U
INSTRUCTION MANUAL
© B64-3385-00/00 (EW, E2W)
ページ2に含まれる内容の要旨
Contents Safety precautions 4 Tuner features 23 Tuning Notes 5 Station Preset Memory Auto Memory Entry About CDs 7 Preset Tuning About AAC, MP3 and WMA 8 RDS features 25 Traffic Information About USB device 10 Radio Text Scroll PTY (Program Type) Notes on Multi-function Program Type preset Key System 11 Changing Language for PTY Function General features 12 CD/USB device/Audio file/External disc control features 28 Power Selecting the Source Playing CD & Audio file Volume Playing USB device At
ページ3に含まれる内容の要旨
Menu system 36 Accessories/ Installation Procedure 46 Menu System Connecting Wires to Terminals 47 Security Code Touch Sensor Tone Installation 49 Manual Clock Adjustment Date Adjustment Removing the Unit 50 Date Mode Synchronize Clock Troubleshooting Guide 51 DSI (Disabled System Indicator) Selectable Illumination Specifications 55 Display Illumination Control Dimmer Built-in Amp Setting Dual Zone System Setting B.M.S. (Bass Management System) B.M.S. Frequency Offset AMP Control News Bulletin w
ページ4に含まれる内容の要旨
Safety precautions Do Not Load 3-in. CDs in the CD slot 2WARNING If you try to load a 3 in. CD with its adapter into the To prevent injury or fire, take the unit, the adapter might separate from the CD and following precautions: damage the unit. • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) About CD players/disc changers inside the unit. connected to this unit • Do not watch or fix your eyes on the unit’s display Kenwood disc changers
ページ5に含まれる内容の要旨
Notes • No USB device comes with this unit. You need to Cleaning the Unit purchase a commercially available USB device. For If the faceplate of this unit is stained, wipe it with a the types of available USB devices, refer to (page 10). If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then • If you experience problems during installation, wipe it again with a clean soft dry cloth.
ページ6に含まれる内容の要旨
Notes This Product is not installed by the manufacturer About "Media Manager" of PC application of a vehicle on the production line, nor by the attached to KDC-W7534U professional importer of a vehicle into an EU • "Media Manager" is recorded in the CD-ROM Member State. attached to this unit. • Refer to the attached installation manual for the installation method of "Media Manager". Information on Disposal of Old Electrical • Refer to the user’s manual in the installation and Electronic
ページ7に含まれる内容の要旨
About CDs Handling CDs Removing CDs • Do not touch the recording surface of the CD. When removing CDs from this unit, pull them out horizontally. CDs that cannot be used • CDs that are not round cannot be used. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Do not stick tape etc. on the CD, or use a CD with • CDs with coloring on the recording surface or CDs tape stuck on it. that are dirty cannot be
ページ8に含まれる内容の要旨
About AAC, MP3 and WMA The playable AAC/MP3/WMA file (hereafter called Playable CD-R/RW format Audio file) and the media format has the following • ISO 9660 Level 1/2 limitation. The Audio file, which is not conforming • Joliet to the specification, may not play normally, or the • Romeo file and folder names may not display correctly. • Long file name. Playable Audio file Playable file format of USB device • AAC, MP3, WMA • For the formats supported by USB devices, refer to http://www.kenw
ページ9に含まれる内容の要旨
Playing order of the Audio file • The Audio file plays in the order which is written by CD writing software. You may be able to set the playing order by writing the play sequence numbers such as "01" to "99" at the beginning of the file name. • Audio files are played in the order the files are written. You can specify the order of playback by numbering files in a folder and writing them by folder. (USB device) Example ^: F Folder older CD (1) ¡: Audio file Audio file ¡! 2 3 ¡" ¡# 4 ¡$ 5 ¡%
ページ10に含まれる内容の要旨
About USB device Notes on Use of the USB device This unit can play audio files stored in the flash • Install the USB device in the place where it will not memory and digital audio player that have a USB prevent you from driving your vehicle properly. port (these devices are referred to as USB devices in • Do not leave the USB device in the vehicle for a long this document). time. It can deform or damage due to direct sunlight, The following restrictions are placed on the types high tempe
ページ11に含まれる内容の要旨
Notes on Multi-function Key System Multi-function Key System serves to control various Real operational example of the Multi- functions with the [1] — [6] buttons. function Key System The basic operation of the Multi-function Key Example: Turning ON/OFF the Random Play during System is described below. CD play. 1. Show the function display of the Random Play. If "RDM" is not shown in the display, press the What is the Multi-function Key System? [NEXT] button to alternate the sections until
ページ12に含まれる内容の要旨
General features Control knob ATT VOL ANG NEXT 1 – 6 SRC Release button Power • This unit automatically turns full power OFF after 20 Turning ON the Power minutes lapses in Standby mode in order to save the Press the [SRC] button. vehicle's battery. The time until full power OFF can be set in (page 42). • When the power is ON, the (page 37) is displayed as "CODE ON" or "CODE OFF". Turning OFF the Power Press the [SRC] button for at least 1 second. Volume Inc
ページ13に含まれる内容の要旨
Attenuator Audio Control Turning the volume down quickly. 1 Select the source to adjust Press the [ATT] button. Press the [SRC] button. Each time you press the button, the Attenuator 2 Enter Audio Control mode turns ON and OFF. Press the [VOL] knob. When the Attenuator is ON, "ATT" is displayed. 3 Select the Basic Audio item to adjust Press the [VOL] knob. Each time you press the knob, the item to be System Q adjusted alternates between the items shown in the table below. Selecting the best s
ページ14に含まれる内容の要旨
General features Adjusting the detail of Audio Audio Setup Control Setting the Sound system, such as Cross over Network. Among the Basic Audio items, you can adjust the Bass level, Middle level, and Treble level in detail. 1 Select the source to adjust Press the [SRC] button. 1 Select the Basic Audio item Select the desired item to be set in detail from 2 Enter Audio Setup mode followings; Press the [VOL] knob for at least 1 second. • Bass level 3 Select the Audio Setup item to adjust • Midd
ページ15に含まれる内容の要旨
5 Exit Audio Setup mode TEL Mute Press the [VOL] knob for at least 1 second. The audio system automatically mutes when a call comes in. When a call comes in Speaker Setting "CALL" is displayed. The audio system pauses. Fine-tuning so that the System Q value is optimal when setting the speaker type. Listening to the audio during a call Press the [SRC] button. 1 Enter Standby The "CALL" display disappears and the audio Press the [SRC] button. system comes back ON. Select the "STANDBY" display.
ページ16に含まれる内容の要旨
General features Theft Deterrent Faceplate Display Type Selection The faceplate of the unit can be detached and Changing the display mode. taken with you, helping to deter theft. 1 Select the key function section Removing the Faceplate Press the [NEXT] button. Press the Release button. Repeatedly press the button until "DISP" is The faceplate is unlocked, allowing you to detach displayed above the [2] button. it. Refer to (page 11). 2 Enter display control
ページ17に含まれる内容の要旨
Graphic display Movie 1 • Under the display type other than "Display Type D", Movie 2 the function item is not displayed. When you select Wallpaper the display type other than "Display Type D", press [1] to [6] buttons or [NEXT] button. The function item will 7 Exit display control mode be displayed approximately for 5 seconds. Press the [6] ("RTN") button. • The indicator is displayed when the display type is set to "Display Type C" or "Display Type D". • To change the information by the
ページ18に含まれる内容の要旨
General features Display Type B In Audio file source Text Selection for Display Information Display Song title & Artist name "Title/Artist"* Selecting the text display. Album name & Artist name "Album/Artist"* 1 Select the key function section Folder name "Folder Name" Press the [NEXT] button. File name "File Name" Repeatedly press the button until "DISP" is Play time & File number "P-Time" displayed above the [2] button. Clock "Clock" Refer to Date "Date" (p
ページ19に含まれる内容の要旨
Display Type C/ Display Type D The text display in the Upper text display part Text Display Switching In Tuner source Changing the text display. Information Display 1 Select the key function section Program Service name (FM) "Frequency/PS"* Press the [NEXT] button. Radio text or Program Service name (FM) "Radio Text"* Repeatedly press the button until "DISP" is Frequency (MW, LW) "Frequency" displayed above the [2] button. Clock "Clock" Refer to Date "Date
ページ20に含まれる内容の要旨
General features The text display in the Middle text display The text display in the Lower text display part part In Tuner source In Tuner source Information Display Information Display Clock "Clock" Indicator "Status" Date "Date" Clock "Clock" Blank "Blank" Date "Date" Radio text (FM) "Radio Text"* Blank "Blank" Radio text (FM) "Radio Text"* In CD & External disc source In CD & External disc source Information Display Clock "Clock" Information Display Date "Date" Indicator "Status" Blank "Blan
