Contents Safety precautions 3 Menu system 24 Menu System Notes 4 Security Code Source Select Mode General features 6 iPod mode setting Power Touch Sensor Tone Selecting the Source Manual Clock Adjustment Volume Date Adjustment Attenuator Date Mode Audio Control DSI (Disabled System Indicator) Adjusting the detail of Audio Control Display Illumination Control Audio Setup Dimmer Speaker Setting Built-in Amp Setting Subwoofer Output Dual Zone System Setting TEL Mute Supreme Setting Function Control
Safety precautions About CD players/disc changers connected 2WARNING to this unit To prevent injury or fire, take the following Kenwood disc changers/ CD players released in 1998 precautions: or later can be connected to this unit. • To prevent a short circuit, never put or leave any Refer to the catalog or consult your Kenwood dealer metallic objects (such as coins or metal tools) inside for connectable models of disc changers/ CD players. the unit. Note that any Kenwood disc changers/ CD
Notes • If you experience problems during installation, Cleaning the Faceplate Terminals consult your Kenwood dealer. If the terminals on the unit or faceplate get dirty, wipe them with a dry, soft cloth. • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. About KENWOOD "Music Editor" of PC • The characters conforming to ISO 8859-1 character application attached to KDC-X7006U set can be displayed. • "Music E
An online manual about audio files is put on the About Bluetooth Hands free control site, www.kenwood.com/audiofile/. On this online Refer to the instruction manual of the Bluetooth manual, detailed information and notes which are not Hands Free Box KCA-BT100 (optional accessory). written in this manual are provided. Make sure to read About Menu operation through the online manual as well. For how to operate Menu, refer to
in this instruction manual. For the items to be se
ページ6に含まれる内容の要旨
General features ATT VOL Release button FNC SRC Control knob ATT indicator Function icon Power Selecting the Source There are two types of source selection methods Turning ON the Power depending on the setting. Press the [SRC] button. SRC Select mode 1: ⁄ • When the power is ON, the (page 25) is 1 Press the [SRC] button. displayed as "CODE ON" or "CODE OFF". 2 Turn the Control knob or push it towards left or Turning OFF the Power right. Press the [SRC] button for at least 1 s
ページ7に含まれる内容の要旨
Audio Control ⁄ • * Function of KDC-X7006U. 1 Select the source to adjust • When connection of the iPod is recognized, the source Press the [SRC] button. display changes from "USB" to "iPod". Refer to (page 6). • Switch between SRC Select mode 1 and 2 in (page 25). 2 Enter Audio Control mode • USB (iPod) source is recognized as CD source on the Press the [VOL] knob. connected unit. 3 Select the Basic Audio item to adjust Press the [VOL] knob. Each t
ページ8に含まれる内容の要旨
General features Adjusting the detail of Audio Control Audio Setup Among the Basic Audio items, you can adjust the Bass Setting the Sound system, such as Cross over level, Middle level, and Treble level in detail. Network. 1 Select the Basic Audio item 1 Select the source to adjust Select the desired item to be set in detail from Press the [SRC] button. followings; Refer to (page 6). • Bass level 2 Enter Audio Setup mode • Middle level Press the [VOL] knob for at least 1
ページ9に含まれる内容の要旨
Speaker Setting TEL Mute Fine-tuning so that the System Q value is optimal The audio system automatically mutes when a call when setting the speaker type. comes in. 1 Enter Standby When a call comes in Press the [SRC] button. "CALL" is displayed. Select the "STANDBY" display. The audio system pauses. Refer to (page 6). Listening to the audio during a call 2 Enter Speaker Setting mode Press the [SRC] button. Press the [VOL] knob. The "CALL" display disappears and the audio
ページ10に含まれる内容の要旨
General features Function Control mode Display Type Selection To set up various functions of this unit, select tree- Changing the display mode. structured function items. 1 Enter Display Type Selection mode 1 Enter Function Control mode Using the Control knob, select "DISP" > "TYPE". Press the [FNC] button. For the operation method, refer to (page 10). 2 Select your desired setup item Select a setup item using the Control knob. 2 Select the display Type Turn the Control
ページ11に含まれる内容の要旨
Display Type A/ Display Type B ⁄ Graphic Display Selection • To change the information by the Display Type, refer to the page on the following table for the methods to Changing the graphic Display. alternate by the Display Type. Display Type AB C D E 1 Enter Graphic Display Selection mode Graphic 1 11 11 — — — Using the Control knob, select "DISP" > Status 2 11 11 — — — "GRAPH". Text 3 — 12 ——— For the operation method, refer to (page 10). Middle 5
ページ12に含まれる内容の要旨
General features Text Display Selection Text Display Selection —Display Type B&E— — Display Type C&D— Selecting the text display. Changing the text display. 1 Enter Text Dispaly Selection mode 1 Enter Text Display Selection mode Using the Control knob, select "DISP" > "TEXT". Using the Control knob, select "DISP" > "TEXT". For the operation method, refer to (page 10). Control mode> (page 10). 2 Select the text 2 Select the tex
ページ13に含まれる内容の要旨
In Auxiliary input source The text display Information Display Condition In Tuner source 34 Auxiliary input name "Source Name" 1 Spectrum Analyzer & Clock* "Speana/Clock" 456 Information Display Condition 1 37 34 Clock* "Clock" Station name "SNPS" 2 Clock* "Clock" 34567 Frequency "Frequency" 34 1 34567 456 Date "Date" Spectrum Analyzer & Clock* "Speana/Clock" 1 Blank "Blank" 567 Clock* "Clock" 37 2 34567 Clock* "Clock" 1 * Function of KDC-X7006U. Date "Date" 34567 2 * Function of KDC-X7006. 567
ページ14に含まれる内容の要旨
General features Station/Disc Naming (SNPS/DNPS) 9 Exit Menu mode Press the [FNC] button. Attaching a title to a Station or CD. ⁄ 1 Receive/play the station/disc you want to • When operation stops for 10 seconds the name at that attach a title to time is registered, and Name Set mode closes. • Memory numbers ⁄ - FM/AM: 30 stations • A title cannot be attached to MD or Audio file media. - Internal CD player: 10 discs 2 Enter Menu mode - External CD changer/ player: Varies according to the C
ページ15に含まれる内容の要旨
Theft Deterrent Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the Faceplate 1 Press the Release button. Drop open the faceplate. 2 Drawing the faceplate to left side pull it to forward and remove it. € • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. • Keep the faceplate in its faceplate case while detached. • Do not expose the faceplate (and the faceplate case) to direct sunlight or excessive
ページ16に含まれる内容の要旨
Tuner/TV control features ATT AUTO/AME FM AM FNC 1 - 6 SRC Control knob ST indicator Frequency display Band display Preset station number Function icon Tuning Tuning Mode Selecting the station. Choose the tuning mode. Press the [AUTO] button. 1 Select tuner source Each time you press the button, the Tuning mode Press the [SRC] button. alternates between the modes shown in the table Select the "TUNER" display. below. Refer to (page 6). Tuning mode Display Operation 2 Se
ページ17に含まれる内容の要旨
3 Enter the frequency 1 Select the band for Auto Memory Entry Press the number buttons on the remote Push the Control knob towards [FM] or [AM]. control. 2 Open Auto Memory Entry Example: Press the [AME] button for at least 2 seconds. Desired frequency Press button When 6 stations that can be received are put in the 92.1 MHz (FM) [0], [9], [2], [1] memory Auto Memory Entry closes. 810 kHz (AM) [0], [8], [1], [0] Cancelling Direct Access Tuning Press the [DIRECT] button on the remote Preset Tun
ページ18に含まれる内容の要旨
Tuner/TV control features Function of LX BUS Television Function of LX BUS Television TV Tuning Preset TV Tuning Selecting the TV channel of a connected LX BUS Recalling the TV channels in the memory. Television (optional accessory). 1 Select the TV band The action depends on the setting of the connected Push the Control knob toward [FM]. LX BUS Television. Refer to the user instruction of the LX BUS Television for details. 2 Enter Preset Tuning Select mode Turn the Control knob. 1 Select TV s
ページ19に含まれる内容の要旨
M.RDM CD/USB device/Audio file/External disc control features SCAN RDM/ REP SRC Release button FNC SRC Control knob S.MODE A.RDM IN indicator Folder number File number Play time Function icon When a disc is inserted Playing CD & Audio file Press the [SRC] button. Select the "Compact Disc" display. When there is no disc inserted Refer to (page 6). 1 Drop open the faceplate Press the Release button. Pause and play Press the Control knob. 2 Insert a disc. Each time you pre
ページ20に含まれる内容の要旨
CD/USB device/Audio file/External disc control features Pause and play 3 Press the faceplate on the left side, and return it Press the [38] button. to its former position. Each time you press the knob, the audio pauses or ⁄ plays. • You can eject the disc for 10 minutes after switching off the engine. Playing CD & Audio file. Removing the USB device 1 Drop open the faceplate Press the Release button. 2 Set the remove mode as the USB source Function of KDC-X7006U Press the [0] button for at le
