ページ1に含まれる内容の要旨
SANTO 3843-8 KG
Electronic Refrigerator/Freezer
Operating Instructions
818 22 15-00/7
ページ2に含まれる内容の要旨
Dear customer, Before placing your new refrigerator into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance. Notes which are important for your safety or for the proper function- 1 ing of the appliance are stressed with a warning triangle and/or with signal words (Warnin
ページ3に含まれる内容の要旨
Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Environmental Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Old Appliances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Appliance Transport . . . . . . . . . . . . .
ページ4に含まれる内容の要旨
Contents Control and Information Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 "Open Door"-Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Temperature Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Function Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Interior Accessories . . . . . . . . . . . . . .
ページ5に含まれる内容の要旨
1 Important Safety Instructions These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using this appliance. Your safety is of paramount importance. If you are unsure about any of the meanings of these warnings contact the Customer Care Department. Prior to Installation • Check the refrigerator/freezer for transport damage. Under no circumstances should a damaged appliance be installed! In the event of damage, please contact yo
ページ6に含まれる内容の要旨
Important Safety Instructions Child Safety Do not allow children to tamper with the controls or play with the product. Keep packaging material away from children! (There is a risk of suffocation!) During Use This appliance is designed for domestic use only, specifically for the storage of edible foodstuffs only. It is not intended for commercial or industrial use Containers with flammable gases or liquids can leak at low temperatures. Do not store any containers with flammable mat
ページ7に含まれる内容の要旨
Environmental Information Packaging All transit packaging materials are environmentally compatible and can be reused. Wood is un-treated. The plastics can be recycled and are identified as follows: >PE< for polyethylene, e.g. the outer covering and the bags in the interior. >PS< for polystyrene foam, e.g. the pads, which are pure hydrocarbon compounds and can be recycled. The carton parts are made from recycled paper. Please dispose of the packaging with due care for the environment. Old A
ページ8に含まれる内容の要旨
2. In order to push the appliance into its final position, press carefully at the top of the door and tip the appliance back slightly. The weight is thus transferred to the back wheels and the appliance can be easily pushed. Before Use Packaging 0 1. Remove all adhesive tape and packaging from the interior of the appli- ance. Any remnants of adhesive can be removed with white spirit. 3 2. Remove the transport protection pieces and pull off the adhesive tape. 3. Wash the inside of the app
ページ9に含まれる内容の要旨
Remove the transport fittings from the storage shelves: 4. Slide the fittings securing the shelf forward to the thicker section on the edge of the storage shelf. 5. Slide the storage shelf far enough forward so that it can be hinged downwards and the fittings can be removed from the guides. Installation Installation Location The appliance should be installed in a well ventilated, dry room. Energy use and efficient performance of the appliance is affected by the ambient temperature. The ap
ページ10に含まれる内容の要旨
Installation The Refrigerator/Freezer Needs Ventilation Air is fed under the door through the vent slots in the base and is exhausted upwards along the back wall. To ensure proper air circulation never cover or alter the vent openings. Important! If the appliance is installed under a hanging cabinet, a clearance of at least 10 cm between the top of the appliance and the cabinet above it must be maintained. Please check whether, after installing your appliance and especially after reve
ページ11に含まれる内容の要旨
Installation Electrical Connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. WARNING – THIS APPLIANCE MUST BE EARTHED 1 The manufacturer declines any liability should these safety measures not be observed. Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance rating plate. The rating plate is inside, on the left. The appliance is supplied with a 13 amp pl
ページ12に含まれる内容の要旨
Reversing the Door The door hinges can be changed from right (as supplied) to left if required to suit the location where the appliance is installed. Warning! Unplug from the mains, before reversing the door. 1 0 1. Open the freezer compartment door and remove the plinth to the front. Move the door bearing cover on the plinth from the left. Refit to the right. 2. Close the freezer compartment door. Open the fridge compart- ment door and unscrew the retaining screw for the self-clos-
ページ13に含まれる内容の要旨
Reversing the Door 5. Unscrew the centre door bearing. 6. Remove the fridge compartment door carefully to the front and place on one side. 7. Unscrew the retaining screw for the self-closing mechanism on the bottom of the fridge compart- ment door. 8. Move the upper bearing pivot to the left. 9. Move the door handles from the left to the right and cover the remaining holes with the hole cover pins. 10. Fasten the self-closing mechanism to the bottom left of the fridge compartment d
ページ14に含まれる内容の要旨
Reversing the Door 11. Carefully slide the fridge com- partment door onto the top bear- ing pivot and close. 12. Slide the centre door bearing into the bottom left of the fridge com- partment door and fasten to the housing. 13. Fasten the self-closing mechanism on the top left of the freezer compartment door, 14. Carefully slide the freezer com- partment door onto the centre bearing pivot and close. 15. Place the lower door bearing with the bearing pivot in the lower left of the freez
ページ15に含まれる内容の要旨
Appliance Description View of Appliance á Control panel à Butter and cheese compartment with lid â Door storage compartments ä Variable storage box ã Bottle compartment/bottle rack å Fruit and vegetable drawers ç Shelves é Freezer drawer (only for storage) When defrosting the bottom drawer also serves as a water collecting vessel. è Freezer drawer (for storage and freezing) ê Freezer tray ë Rating plate 818 22 15-00/7 15
ページ16に含まれる内容の要旨
Appliance Description Freezer Tray with "Cold Accumulation Block" A freezer tray with a cold accu- mulation block and one ice tray is included below the upper drawer in the freezer compartment. Refer to the section "Prior to Initial Start-Up" regarding the freezing of the cold accumula- tion block. In the event of power failure or a malfunction of the appliance, the 3 cold accumulation block will increase the hold over period by several hours. The block may also be used in a cool bag to
ページ17に含まれる内容の要旨
Appliance Description Control Panel 1 ON/OFF indicator light for refrigerator (green) 2 ON/OFF button for refrigerator 3 Temperature setting button for refrigerator (for warmer temperatures) 4 Temperature display for refrigerator 5 Temperature setting button for refrigerator (for colder temperatures) 6 COOLMATIC indicator light (yellow) COOLMATIC for intensive cooling in the refrigerator 7 COOLMATIC button 8 ON/OFF indicator light for freezer compartment (green) 9 ON/O
ページ18に含まれる内容の要旨
Appliance Description Temperature Setting Buttons The temperature is adjusted using the „+“ (WARMER) and „-“ (COLDER) buttons. These buttons are connected to the temperature display. The temperature display is switched over from the display of the ACTUAL temperature (Temperature display is illuminated) to the dis- play of the DESIRED temperature (Temperature display flashes) by pressing one of the two buttons, „+“ (WARMER) or „-“ (COLDER). Each time one of the two buttons is pressed agai
ページ19に含まれる内容の要旨
Prior to Initial Start-Up Before connecting the appliance to the mains and putting it into ope- 1 ration for the first time, leave the appliance to stand for 30 minutes if was transported upright. After transport on its side, the appliance must be left to stand for 2 hours before putting it into operation. This is necessary to allow the oil to flow back into the compressor. Otherwise the compressor may be damaged. 0 1. Please clean the appliance interior and all accessories prior to initial
ページ20に含まれる内容の要旨
Initial Start-Up The refrigerator and freezer compartments can be operated and con- trolled independently of one another. 0 1. Insert plug into mains socket. Refrigerator Start-Up 0 1. Press the refrigerator ON/OFF button. The green power indicator for the fridge compartment lights up. Set the refrigerator to the desired temperature (see section: "Temperature Adjustment"). Goods to be refrigerated can be loaded immediately after switching on, 3 because the storage temperature in the refriger
