ページ1に含まれる内容の要旨
CD-RECEIVER
KDC-W5137
KDC-W5137Y
INSTRUCTION MANUAL
© B64-3760-00/00 (E0/E20)
ページ2に含まれる内容の要旨
Contents Safety precautions 3 Menu system 20 Menu System Notes 4 Security Code Touch Sensor Tone General features 7 Manual Clock Adjustment Power Synchronize Clock Selecting the Source DSI (Disabled System Indicator) Volume Selectable Illumination Attenuator Display Illumination Control Audio Control Dimmer Audio Setup Switching preout Bass Boost Supreme Setting Speaker Setting News Bulletin with Timeout Setting Switching Display Local Seek Subwoofer Output Tuning Mode Theft Deterrent Faceplate
ページ3に含まれる内容の要旨
Safety precautions Do Not Load 8 cm (3 in.) CDs in the CD slot 2WARNING If you try to load a 8 cm (3 in.) CD with its adapter into To prevent injury or fire, take the following the unit, the adapter might separate from the CD and precautions: damage the unit. • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside About CD players/disc changers connected the unit. to this unit • Mounting and wiring this product requires skills and Kenwoo
ページ4に含まれる内容の要旨
Notes • If you experience problems during installation, Cleaning the Unit consult your Kenwood dealer. If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. • When you purchase optional accessories, check with If the faceplate is stained badly, wipe the stain off with your Kenwood dealer to make sure that they work a cloth moistened with neutral cleaner, then wipe it with your model and in your area. again with a clean soft dry cloth. • The charac
ページ5に含まれる内容の要旨
About Audio file Handling CDs • Playable Audio file • Do not touch the recording surface of the CD. AAC (.m4a), MP3 (.mp3), WMA (.wma) • Do not stick tape etc. on the CD, or use a CD with tape stuck on it. • Playable disc media • Do not use disc type accessories. CD-R/RW/ROM • Clean from the center of the disc and move • Playable disc file format outward. ISO 9660 Level 1/2, Joliet, Romeo, Long file name. • When removing CDs from this unit, pull them out Although the audio files are compl
ページ6に含まれる内容の要旨
Notes This Product is not installed by the manufacturer of a About DAB Tuner control vehicle on the production line, nor by the professional Refer to A group on the Instruction manual of DAB importer of a vehicle into an EU Member State. Tuner KTC-9090DAB (optional accessory) for the control method of DAB Tuner function. However, the following control methods of the Information on Disposal of Old Electrical function for this unit may be differed from the and Electronic Equipment (applicab
ページ7に含まれる内容の要旨
General features ATT VOL FM AM Release button B.BOOST SRC Control knob Clock display BOOST indicator ATT indicator Power ⁄ • This unit automatically turns full power OFF after 20 Turning ON the Power minutes lapses in Standby mode in order to save the Press the [SRC] button. vehicle's battery. The time until full power OFF can be set in (page 25). • When the power is ON, the (page 20) is displayed as "CODE ON" or "CODE OFF". Turning OFF the Power Press the
ページ8に含まれる内容の要旨
General features Attenuator Audio Setup Turning the volume down quickly. Setting the Sound system, such as Volume offset. Press the [ATT] button. 1 Select the source to adjust Each time you press the button, the Attenuator Press the [SRC] button. turns ON and OFF. 2 Enter Audio Setup mode When the Attenuator is ON, the "ATT" indicator Press the [VOL] knob for at least 1 second. blinks. 3 Select the Audio Setup item to adjust Press the [VOL] knob. Each time you press the knob, the item to be A
ページ9に含まれる内容の要旨
In Audio file source Speaker Setting Information Display Fine-tuning so that the System Q value is optimal Song title & Artist name "TITLE" when setting the speaker type. Album name & Artist name "ALBUM" 1 Enter Standby Folder name "FOLDER" Press the [SRC] button. File name "FILE" Select the "STANDBY" display. Track number & Play time "P-TIME" Clock "CLOCK" 2 Enter Speaker Setting mode Press the [VOL] knob. In Standby/ Auxiliary input source 3 Select the Speaker type Information Display Turn th
ページ10に含まれる内容の要旨
General features Subwoofer Output 2 Push the faceplate in until it clicks. The faceplate is locked in place, allowing you to use Turning the Subwoofer output ON or OFF. the unit. Push the Control knob toward [AM] for at least 2 seconds. Each time you push the knob, Subwoofer output switches ON and OFF. When it is ON, "SW ON" is displayed. Theft Deterrent Faceplate The faceplate of the unit can be detached and taken TEL Mute with you, helping to deter theft. The audio system automatically mut
ページ11に含まれる内容の要旨
Tuner features AME FM AM 1 - 6 SRC Control knob Band display Frequency display ST indicator Preset station number Tuning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the "TUNER" display. 2 Select the band Push the Control knob towards [FM] or [AM]. Each time you push the knob toward [FM], it switches between the FM1, FM2, and FM3 bands. 3 Tune up or down band Push the Control knob towards [4] or [¢]. ⁄ • During reception of stereo stations the "ST" indicator is O
ページ12に含まれる内容の要旨
Tuner features Function of remote control Auto Memory Entry Direct Access Tuning Putting stations with good reception in the memory automatically. Entering the frequency and tuning. 1 Select the band for Auto Memory Entry 1 Select the band Push the Control knob towards [FM] or [AM]. Press the [FM] or [AM] button. 2 Enter Direct Access Tuning mode 2 Open Auto Memory Entry Press the [DIRECT] button on the remote Press the [AME] button for at least 2 seconds. control. "A-MEMORY" is displayed. "– –
ページ13に含まれる内容の要旨
RDS features TI FM AM 1 - 6 SRC Control knob TI indicator RDS indicator PTY indicator Receiving other traffic information stations Traffic Information Push the Control knob towards [4] or [¢]. Changing to traffic information automatically when ⁄ a traffic bulletin starts even when you are not • Traffic information can be switched when it is on the listening to the radio. Tuner Source. However, you cannot switch the Traffic Press the [TI] button. information during reception of the Traffic bu
ページ14に含まれる内容の要旨
RDS features PTY (Program Type) ⁄ • Speech and Music include the Program type shown Selecting the Program Type and searching for a below. station. Music: No.12 — 17, 26 — 30 Speech: No.3 — 11, 18 — 25, 31 1 Enter PTY mode • You can put the Program Type in the [1] — [6] button Press the Control knob. memory and for quick recall. Refer to the (page 14). ⁄ • You can change the display language. Refer to
ページ15に含まれる内容の要旨
Changing Language for PTY Function Selecting the Program Type display language. 1 Enter PTY mode Refer to (page 14). 2 Enter Changing Language mode Press the [TI] button. 3 Select the language Push the Control knob towards [FM] or [AM]. Each time you push the knob, the language alternates between the languages shown in the table below. Language Display English "ENGLISH" French "FRENCH" German "GERMAN" 4 Exit Changing Language mode Press the [TI] button. | English 15
ページ16に含まれる内容の要旨
CD/Audio file/External disc control features FM AM Release button SCAN RDM/ REP F.SEL M.RDM SRC Control knob 3 Track number Play time IN indicator Disc number Pause and play Playing CD & Audio file Press the Control knob. Each time you press the knob, the audio pauses or When there is no disc inserted plays. 1 Drop open the faceplate Press the Release button. Eject the disc 2 Insert a disc. 1 Drop open the faceplate Press the Release button. 3 Push the faceplate on the left side, and return it
ページ17に含まれる内容の要旨
Function of disc changer/ Audio file Playing External Disc Disc Search/Folder Search Playing discs set in the optional accessory disc player connected to this unit. Selecting the disc set in the Disc changer or the folder recorded on the Audio file media. Press the [SRC] button. Select the display for the disc player you want. Push the Control knob towards [FM] or [AM]. Display examples: Display Disc player "CD CH" CD changer Function of remote control "MD CH" MD changer Direct Track/File Sear
ページ18に含まれる内容の要旨
CD/Audio file/External disc control features Track/File/Disc/Folder Repeat Random Play Replaying the song, disc in the Disc changer or Play all the songs on the disc or Audio file folder in Audio file folder you are listening to. random order. Press the [REP] button. Press the [RDM] button. Each time you press the button, the Repeat Play Each time you press the button, Random Play turns alternates between the modes shown in the tables ON or OFF. below. When the Random mode is ON, "DISC RDM"/"F
ページ19に含まれる内容の要旨
Function of Audio file Text/Title Scroll Folder Select Scrolling the displayed CD text, Audio file text, or MD title. Quickly selecting the folder you want to hear. Push the Control knob toward [FM] for at least 1 Enter Folder Select mode 2 seconds. Press the [F.SEL] button. ⁄ "FLD SEL" is displayed. • When the (page 22) is set During Select mode the folder information is to OFF, the display may black out while scrolling. displayed as shown below. Folder name d
ページ20に含まれる内容の要旨
Menu system FM AM MENU SRC Control knob Menu display NEWS indicator RDS indicator Menu System 4 Exit Menu mode Press the [MENU] button. Setting beep sound during operation, etc. ⁄ functions. The Menu system basic operation method is • When other items those applicable to the basic operation method above are displayed, their setting explained here. The reference for the Menu items content chart is entered. (Normally the setting listed at and their setting content is after this operation the
