ページ1に含まれる内容の要旨
KDC-X792
KDC-X692
KDC-MP738U
KDC-MP638U
CD-RECEIVER
INSTRUCTION MANUAL
AMPLI-TUNER LECTEUR DE CD
MODE D’EMPLOI
REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM
MANUAL DE INSTRUCCIONES
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the sp
ページ2に含まれる内容の要旨
Contents Before use 3 Other Functions 19 Activating Security Code Basic Operation 4 Deactivating Security Code General functions Manual Clock Adjustment Tuner functions Date Adjustment Disc & Audio file play functions AMP Control Picture downloading Function Control 6 Demonstration mode setting Theft Deterrent Faceplate ⁄ • Read through this page first for the setting of each function. Audio Adjustments 23 Audio Control Display Settings 8 Adjusting the detail of Audio Control About Display Type
ページ3に含まれる内容の要旨
Before use Cleaning the Unit 2 WARNING If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. To prevent injury while using this If the faceplate is stained badly, wipe the stain off with product, take the following safety a cloth moistened with neutral cleaner, then wipe it precautions: again with a clean soft dry cloth. • To prevent a short circuit and possible fire, never put any metallic objects (such as coins or metal € tools) inside the prod
ページ4に含まれる内容の要旨
Basic Operation Release [AUD] Control knob AUX Auxiliary input [1] [2] [3] [4] [5] [6] [FNC] [AUTO] [ATT] [SRC] (Rear side) USB Terminal • To use the TEL Mute feature, you need to hook General functions ⁄ up the MUTE wire to your telephone using a commercial telephone accessory. Refer to Power/Source Select button [SRC] (page 34). Turns on the power. When the power is ON, select a source. Auxiliary input Auxiliary input SRC Select mode 1: Press the [SRC]
ページ5に含まれる内容の要旨
, : Indicates the button etc. to operate. Tuning Control knob USB device removing [0] Changes the frequency when pushing toward left or Press this button for 2 seconds or longer to select the right. remove mode, and the remove the USB device. • During reception of stereo stations the “ST” indicator During the remove mode, The 0 indicator blinks. ⁄ is ON. Pause and play Control knob Tuning mode select [AUTO] Switches between pause and play each time the Switches as follows each time t
ページ6に含まれる内容の要旨
Function Control Functions in the table below can be set up by using Function Control. Category Item Setting Entry Setting overview Condition Page Sets/Resets security code. MENU “Security Set”/ 1 sec. 19 “Security Clear” Sets the source selection method. “SRC Select” “1”*/ “2” 32 When set to “ON”, allows you to select music in the manner “iPod Mode” “OFF”/ “ON”* 15 similar to that of the iPod. Setting the operation check sound (beep sound) ON/OFF. “Beep” “OFF”/ “ON”* Sets the clock. “Clock
ページ7に含まれる内容の要旨
Category Item Setting Entry Setting overview Condition Page When set to “ON”, displays the function information for Type > STATUS “ON”/ “OFF” Å A. 1 Sets the G-Analyzer screen. Ï > GMENU* 12 1 Uses the G-Analyzer functions. > GMA* Ï 12 Presets a station. P.MEM 17, 27 SCAN “ON”/ — When set to “ON”, plays the intro of the music in the folder successively. When set to “ON”, plays the music in the folder randomly. RDM “ON”/ — FiREP “ON”/ — When set to “ON”, plays the music repeatedly. When set t
ページ8に含まれる内容の要旨
Display Settings Function Control 1 Enter Function Control mode About Display Type Press the [FNC] button. Shown below are examples of display types. Function icon is displayed. Display Display Type 2 Select your desired setup item “TYPE [A]” 2 Operation type Operation 4 Movement between items Turn the Control knob. 1 Selection of item Press the Control knob. “TYPE [B]” 2 Return to previous item Press the [FNC] button or “ ” icon 1 1 Repeat selection and determination until your 1 desired setu
ページ9に含まれる内容の要旨
In HD Radio source (Optional) Text Display Selection Information Display Changing the text display. Station name “Station Name” Title “Title” In Tuner source Frequency “Frequency” Information Display Clock “Clock” Station name “SNPS” Date “Date” Title & Artist name* (FM) “Title/Artist” Blank “Blank” Station name* (FM) “Station Name” Radio text plus* (FM) “Radio Text Plus” In SIRIUS/ SAT source (Optional) 1 Radio text (FM)* “Radio Text” Information Display Frequency “Frequency” Channel Name “Ch
ページ10に含まれる内容の要旨
Display Settings Station/Disc Naming (SNPS/DNPS) ⁄ • If the selected display item does not have any Attaching a title to a Station or CD. information, alternative information is displayed. • Some items cannot be selected depending on the 1 Receive/play the station/disc you want to display type and row. attach a title to • When LX-AMP is connected, the item setup by the 2 Select Name set mode item during Menu Display mode of LX-AMP is displayed. • When selecting “Folder Name” while playing
ページ11に含まれる内容の要旨
Auxiliary Input Display Setting Selects the display below when changing to Auxiliary input source. 1 Select Auxiliary input display setting item during Menu mode (In AUX mode) Select the “Name Set” display. For how to select Function Control items, refer to (page 6). 2 Enter Auxiliary input display setting mode Press the Control knob for at least 1 second. The presently selected Auxiliary input display is displayed. 3 Select the Auxiliary input display Turn the Control kn
ページ12に含まれる内容の要旨
Function of KDC-X792 G-Analyzer Operation In Standby mode G-Analyzer Control G-Analyzer Vehicle Setup You can adjust following G-Analyzer Control items ; Enter vehicle weight or class to calculate Item Setting/ Page Setting overview horsepower. > “GMENU” G- Graphic/ Downloaded G-Analyzer display 1 2 G-Graphic* / G-Meter* / Selection 1 Enter G-Analyzer vehicle weight setup 2 G-Counter* mode (In Display Type F) > “GMA” > “STOP . (page 13) G-Analyzer Stop Watch Select “DISP” > “GMA” > “HP SET”
ページ13に含まれる内容の要旨
In Standby mode G-Analyzer Stop Watch G-Analyzer Calibration Setup The control of stop watch can be started by G- Analyzer function. G-Analyzer requires calibration for horizontal acceleration and braking. € ⁄ • Do not use G-Analyzer stop watch on the Public roads. • To ensure accurate calibration, go through the following 1 Enter G-Analyzer Stop Watch mode (In Display steps at a level place where you can move the vehicle Type F) straight ahead. Select “DISP” > “GMA” > “STOP.W”. 1 Park the
ページ14に含まれる内容の要旨
Function of KDC-X792 G-Analyzer Operation G-Analyzer Horsepower Analysis G-Analyzer Reset This measures the horsepower and displays graph Resets the value of G-Meter, G-Counter and G- and max power. It automatically saves the highest Analyzer Horsepower Analysis. record. 1 Enter G-Analyzer Reset mode (In Display Type € F) • Do not use G-Analyzer Horsepower Analysis on the Select “DISP” > “GMA” > “RESET”. Public roads. For how to select Function Control item, refer to • Do not use this produc
ページ15に含まれる内容の要旨
Music disc/Audio file Operation Function of Audio file/ Internal CD source Function of remote control Music Select Direct Music Search Selecting the music you want to listen to from the Searchs the music by entering the track number. device or media being played now. 1 Enter the music number 1 Enter Music Select mode Press the number buttons on the remote Turn the Control knob. control. The music list is displayed. 2 Search the music 2 Search for music Press the [4] or [¢] button. Select the ca
ページ16に含まれる内容の要旨
Music disc/Audio file Operation Basic Operation of Disc Changer (Optional) Selecting CD changer source Press the [SRC] button. Select the “CD Changer” display. For how to select source item, refer to of (page 4). Music search Push the Control knob towards right or left. Disc Search Push the Control knob towards up or down. Playing the Current Song or Disc Repeatedly. (Repeat play) Press the [4] button. Pressing the button repeatedly selects Trac
ページ17に含まれる内容の要旨
Tuner Operation Function of remote control Station Preset Memory Direct Access Tuning Putting a station in the memory. Entering the frequency and tuning. 1 Select the frequency to put in the memory Push the Control knob towards right or left. 1 Enter Direct Access Tuning mode Press the [DIRECT] button on the remote 2 Enter Preset Memory mode control. Select “P.MEM” . “– – – –” is displayed. For how to select Function Control item, refer to (page 6). 2 Enter the frequency Pre
ページ18に含まれる内容の要旨
Tuner Operation Function of KDC-X792 Function of KDC-X792 PTY (Program Type) Program Type preset Selecting the Program Type below and searching Putting the Program Type in the Preset button for a station; memory and quick recall. Program Type Display Program Type Display Presetting the Program Type Speech “All Speech” Jazz “Jazz” 1 Select the Program Type to preset Music “All Music” Classical “Classical” Refer to (page 18). News “News” R & B “Rhythm & Blues” Information “I
ページ19に含まれる内容の要旨
Other Functions Activating Security Code Deactivating Security Code To deactivate the Security Code function. ⁄ • You can set the Security Code with a 4 digit number of your 1 Select Security Code item during Menu choice. mode (In Standby mode) • The Security Code cannot be displayed or referenced. Make Select the “Security Clear” display. a note of the Security Code and treasure it up. For how to select Function Control items, refer to 1 Select Security Code item during Menu
ページ20に含まれる内容の要旨
Other Functions Function of KDC-X792/KDC-X692 Manual Clock Adjustment When LX AMP unit connecting 1 Select Clock Adjustment item during Menu AMP Control mode (In Standby mode) You can control the LX AMP connected to the unit. Select the “Clock Adjust” display. For how to select Function Control items, refer to 1 Select AMP Control item during Menu mode (page 6). Select the “AMS Control” display. For how to select Function Control items, refer to 2 Enter Clock adjustment mo
