ページ1に含まれる内容の要旨
KDC-X492
KDC-MP438U
KDC-MP408U
KDC-MP338
CD-RECEIVER
INSTRUCTION MANUAL
AMPLI-TUNER LECTEUR DE CD
MODE D'EMPLOI
REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM
MANUAL DE INSTRUCCIONES
Kenwood Corporation
D Madefor
~
H3'Radio· «i
@J iPod
'!IREADY
'~IO'"
READY Me
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new CD-receiver.
For your records
Record the serial number, found on the b
ページ2に含まれる内容の要旨
Contents Before use 16 Basic Operation 4 Accessories/Installation Procedure 18 General functions Connecting Wires to Terminals 19 Tuner functions Disc & Audio file play functions Installation 20 General Operation 6 Troubleshooting Guide 21 Audio Control Adjusting the detail of Audio Control Specifications 23 Audio Setup Speaker Setting Display Switching Tuner Operation 9 Direct Access Tuning Frequency Step Setting Music disc/Audio file Operation 10 Play Functions of Disc Changer Direct Music Sea
ページ3に含まれる内容の要旨
Before use • If you experience problems during installation, AWARNING consult your Kenwood dealer. To prevent injury or fire, take the following • When you purchase optional accessories, check with precautions: your Kenwood dealer to make sure that they work • To prevent a short circuit, never put or leave any with your model and in your area. metallic objects (such as coins or metal tools) inside • The characters which can be displayed by this unit the unit. are A-Z 0-9 @ " , ' % & * + - = , .1
ページ4に含まれる内容の要旨
ページ5に含まれる内容の要旨
ページ6に含まれる内容の要旨
General Operation Function of KDC-X492/KDC-MP40BU Audio Control Adjusting the detail of Audio Control You can adjust following Audio Control items; You can adjust the following Basic Audio Items in datail: Bass level, Middle level, and Treble leva!. Subwooferlevel "SUB-Wt' -15-+15 Bass Boost** "B.BOOSH' "Ll"/"L2"I"OFF" (The indicator turns on according to the setting.) System a "NATURAt'/ Natural/User setting/Rock/ BassaFactor "BASS 0" "USER"I"ROCK"j Pops/EasylTop 40/Jazz Bass Extend "BASS EXT"
ページ7に含まれる内容の要旨
Audio Setup Speaker Setting You can set Sound system, such as follows; Fine-tuning so that the System Q value is optimal when setting the speaker type as follows; Front High Pass Filter* "HPF" Through/40*'/60*'/80/100/120/ ---- 1501180/220*' Hz 11."""""_- OFF "SP SEL OFF" Rear High Pass Filter* "HPR" Through/40*1/60*1/80/100/120/ For 5&4in. speaker "SP SEL 5/4" 1501180/220*' Hz For 6&6x9 in. speaker "SP SEL 6*9/6" Low Pass Filter "LPF SW" 50*'/60*1.2/801100*1/1201160*3/ For the OEM speaker "SP S
ページ8に含まれる内容の要旨
General Operation Display Switching 1 Enter Switching Display mode Press the [~II] button for at least 1 second. Changes displayed information on each source "DISPLAY SEL" is displayed. following; 2 Select the Display item In Tuner source Push the Control knob towards right or left. 3 Exit Switching Display mode Press the [~II] button. ~ • When you select the clock display, the display setting of In CD &External disc source each source will be changed to the clock display. 1_"_.. • If the select
ページ9に含まれる内容の要旨
Tuner Operation Function ofremote control Direct Access Tuning Entering the frequency and tuning. 1 Enter Direct Access Tuning mode Press the [DIRECT] button on the remote control. "- - - -" is displayed. 2 Enter the frequency Press the number buttons on the remote control. Example: ~,',.,', .' ~% " ••~'_ •• ",' l$i"" ",. ',""," _--:}~. 92.1 MHz (FM) [0], [9], [2], [1] 810 kHz (AM) [0], [8], [1], [0] Cancelling Direct Access Tuning Press the [DIRECT] button on the remote control. Q ~ • You can e
ページ10に含まれる内容の要旨
Music discIAudio file Operation Function ofdisc changers with remote control Play Functions of Disc Changer Direct Disc Search While a disc in the disc changer is being played, the following play functions can be used. Searchs the disc by entering the disc number. Playing the Current Song or Disc Repeatedly. 1 Enter the disc number (Repeatplay) Press the number buttons on the remote Press the [4) button. control. Pressing the button repeatedly selects Track Repeat 2 Search the disc play on nRAC
ページ11に含まれる内容の要旨
Function of KDC-X492/KDC-MP438U Function of iPod iPod Select Search for the song you want to listen to by selecting the same menu item as that of iPod. 1 Enter Multi Jog Select mode Press the [MJOG] button. "MULTI JOG ON" is displayed. Displays the play list. 2 Searching for and playing a song _ ..18__ Movement between items Turn the Control knob. Selection of item Press the Control knob. Return to previous item Push the Control knob towards up. Return to Top menu Push the Control knob towards u
ページ12に含まれる内容の要旨
Menu Operation source to which the item is displayed. Menu System (]iJ: Can be set in other than standby state. Set up the following functions; m :Can be set in standby state. ..: Can be set while Audio file source of CD/USB (excluding iPod). "SECURITY Referto liD: Can be set during FM reception. SET"/ page 12 Em: Can be set during Satellite radio source. "SECURITY r.tm3 :Can be set while accessing AUX source. CLR" GIED: Can be set while HD Radio source. "CLOCK Refer to Sets the clock, m - : Can
ページ13に含まれる内容の要旨
"CLEAR" is displayed. S Repeat steps 3 and 4, and complete the The Security Code function deactivates. Security Code. 7 Exit Security Code mode 6 Confirm the Security Code Press the [MJOG] button. Press the Control knob for at least 3 second. ~ When "RE-ENTER" is displayed, "CODE" is also ~ displayed. • If the entered security code is incorrect, "ERROR" is displayed. Enter a correct security code. 7 Do the step 3 through 6 operation, and reenter the Security Code. "APPROVED" is displayed. The Se
ページ14に含まれる内容の要旨
Menu Operation Auxiliary Input Display Setting 3 Set the Receive mode Push the Control knob towards up or down. Selects the display below when changing to Auxiliary input source; 4 Exit Receive mode Press the [MJOG] button. •"AUX" •"DVD" •"PORTABLE" ·"GAME" Demonstration mode Setting •"VIDEO" ·"TV" Turning the demonstration mode ON/OFF. 1 Select Auxiliary input display setting item 1 Select Demonstration item during Menu mode during Menu mode Select the "DEMO MODE" display. Select the "NAME SET"
ページ15に含まれる内容の要旨
Basic Operations of remote control In Tuner/HD Radio source $11( VOL-~~ __-+++--An Band select ~ [FM]/[AM] AUD--+__ Station select ~[~]/[~] Recall preset stations ~ [1] - [6] *!--DIRECT In CD/USB source Music select ~[~]/[~J Folder/Disc select ~ [FM]/[AM] Pause/Play ~ [~II] *KDC-X4921MP438U/MP408U only In Satellite Radio tuner source General control Preset band select ~ [FM] ~ [VOL] Volume control Channel select ~[~]/[~] Source select ~[SRCJ Recall preset channels ~ [1] - [6] ~ [ATT] Volume redu
ページ16に含まれる内容の要旨
Appendix About Audio file About USB device • Playable Audio file • If you start playback after connecting the iPod, the AAC-LC (.m4a), MP3 (.mp3), WMA (.wma) music that has been played by the iPod is played fi rst. • Playable disc media In this case, "RESUMING" is displayed without CD-RiRW/ROM displaying a folder name, etc. Changing the browse • Playable disc file format item will display a correct title, etc. ISO 9660 Levell /2, Joliet, Romeo, Long file name. • When the iPod is connected to thi
ページ17に含まれる内容の要旨
listening to output from external unit. This Disconnection Massage>, and , press [AUTO] button for at least 1 prevents the noise when no external unit is connected to AUX terminal. second. Moreover, some displays are different from the OFF: Disables the selection of AUX source. description of KCA-BT1 00 Instruction Manual. Set to OFF when not using the AUX terminal. • ZONE2 (Dual Zone) Set the destination (front speaker "FRONT" or rear speaker "REAR") of the sub sourc
ページ18に含まれる内容の要旨
Accessories/Installation Procedure If you use the wrong screws, you could damage the unit. Accessories If the power is not turned ON ("PROTECT" is displayed), the speaker wire may have a short-circuit or touched the chassis of the vehicle and the protection function may have been activated. Therefore, the speaker wire should be checked. If your car's ignition does not have an ACC position, connect the ignition wires to a power source that can be turned on and off with the ignition key. If you co
ページ19に含まれる内容の要旨
Connecting Wires to Terminals Steering remote control (Light BluelYellow) (KDC-X492/MP438U/MP408U only) To use the steering wheel remote control feature, you need to an exclusive KDC-X492/MP438U remote adapter (not supplied) matches your car is required. When this terminal is not in use, leave its cap on. Rear preout :0:0] L:O:O]R Front preout Front preout SubWoofer preout [0:0] lb=C31 (KDC-MP338 only) KDC-MP408U L R _.--- FM/AM antenna input Rear preout/SubWoofer preout -_ (KDC-X492/MP438U/MP40
ページ20に含まれる内容の要旨
Installation non-Japanese cars Removing the hard rubber frame 1 Engage the catch pins on the removal tool and Metal mounting strap remove the two locks on the upper level. (commercially available) Upper the frame and pull it forward as shown in Firewall or metal support the figure. \ Accessory@ Bend the tabs of the Removal tool mounting sleeve with a screwdriver or similar utensil 2 When the upper level is removed, remove the and attach it in place. lower two locations. ~ Self-tapping screw ~ (c
