ページ1に含まれる内容の要旨
CD-RECEIVER
KDC-MP6029
KDC-MP5029
INSTRUCTION MANUAL
© B64-2950-00/00 (MW)
ページ2に含まれる内容の要旨
Contents Safety precautions 3 Menu system 19 Menu System Notes 4 Security Code Touch Sensor Tone About CDs 5 Manual Clock Adjustment DSI (Disabled System Indicator) About AAC,MP3 and WMA 6 Selectable Illumination Dimmer General features 7 Built-in Amp Setting Power AMP Control Selecting the Source CRSC (Clean Reception System Circuit) Volume Auxiliary Input Display Setting Attenuator Text Scroll System Q CD Read Setting Audio Control Basic Operations of remote 23 Audio Setup Spe
ページ3に含まれる内容の要旨
Safety precautions About CD players/disc changers 2WARNING connected to this unit To prevent injury or fire, take the KENWOOD disc changers/ CD players released in following precautions: 1998 or later can be connected to this unit. • To prevent a short circuit, never put or leave any Refer to the catalog or consult your Kenwood metallic objects (such as coins or metal tools) dealer for connectable models of disc changers/ inside the unit. CD players. Note that any KENWOOD disc changers/ C
ページ4に含まれる内容の要旨
Notes • If you experience problems during installation, About DAB Tuner control consult your Kenwood dealer. Refer to A group on the Instruction manual of DAB Tuner KTC-9090DAB (optional accessory) for the • If the unit fails to operate properly, press the Reset control method of DAB Tuner function. button. The unit returns to factory settings when However, the following control methods of the the Reset button is pressed. function for this unit may be differed from the • Press the reset
ページ5に含まれる内容の要旨
About CDs Handling CDs Removing CDs • Don’t touch the recording surface of the CD. When removing CDs from this unit pull them out horizontally. CDs that can’t be used • CDs that aren’t round can’t be used. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Don’t stick tape etc. on the CD. • CDs with coloring on the recording surface or that Also, don’t use a CD with tape stuck on it. are dirty can’t be use
ページ6に含まれる内容の要旨
About AAC, MP3 and WMA The playable AAC/MP3/WMA file (hereafter called MP3 ID3 Tag/ WMA Contents property: Audio file) and the media format has the following 30 characters limitation. The Audio file, which is out of the specification, may not able to be played normally, • File/Folder name is the number of the characters or the file and folder names may not be displayed including the extensions correctly. • MP3 ID3 Tag can only display the tag of Ver1.X. Playable Audio file Limitation of st
ページ7に含まれる内容の要旨
General features ATT/DIM VOL Q SRC Release button Control knob ATT indicator Clock display Power • * Function of the KDC-MP6029 Turning ON the Power Press the [SRC] button. • When the power is ON, the (page 20) is displayed as "CODE ON" or "CODE OFF". Volume Turning OFF the Power Press the [SRC] button for at least 1 second. Increasing Volume Turn the [VOL] knob clockwise. Decreasing Volume Turn the [VOL] knob counterclockwise. Selecting the Source Press the [SRC] button. Sour
ページ8に含まれる内容の要旨
General features Attenuator 2 Enter Audio Control mode Press the [VOL] knob. Turning the volume down quickly. 3 Select the Audio item for adjustment Press the [ATT] button. Press the [VOL] knob. Each time the button is pressed, the Attenuator Each time the knob is pressed, the items that can turns ON and OFF. be adjusted switch as shown below. When it’s ON, the "ATT" indicator blinks. 4 Adjust the Audio item Turn the [VOL] knob. Adjustment Item Display Range System Q 1 2 Subwoofer level * * "S
ページ9に含まれる内容の要旨
Function of the KDC-MP6029 Adjustment Item Display Range Subwoofer Output Front High Pass "HPF" Through/80/100/120/150 2 Filter * /180 Hz Turning the Subwoofer output ON or OFF. Rear High Pass "HPR" Through/80/100/120/150 2 Hold down on [AM] of the Control knob for at Filter * /180 Hz 1 2 least 1 second. Low Pass Filter* * "LPF" 60/80/120/Through Hz 1 2 Each time the button is pressed, Subwoofer Subwoofer Phase* * "PHAS" Reverse (180°) / Normal (0°) output switches ON and OFF. Volume offset "V
ページ10に含まれる内容の要旨
General features Function of the KDC-MP5029 Switching Display Dimmer Control Switching the information displayed. You can change the unit's display to dimmer. 1 Enter Switching Display mode Press the [DIM] button for at least 1 second. Press the Control knob for at least 1 second. Each time the button is pressed for 1 second, the "DISP SEL" is displayed. Dimmer contol turns ON and OFF. 2 Select the Display item When it’s ON, "DIM ON" is displayed. Push the Control knob to [4] or [¢]. In Tuner
ページ11に含まれる内容の要旨
2 Push the faceplate in until it clicks. The faceplate is locked in place, allowing you to use the unit. TEL Mute The audio system automatically mutes when a call comes in. When a call comes in "CALL" is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL" display disappears and the audio system comes back ON. When the call ends Hang up the phone. The "CALL" display disappears and the audio system comes back ON. English | 11
ページ12に含まれる内容の要旨
Tuner/TV control features AUTO/ AME SRC 1 - 6 Control knob ST indicator Band display Frequency display Preset station number Each time the button is pressed, the Tuning Tuning mode switches as shown below. Selecting the station. Tuning mode Display Operation Auto seek "AUTO 1" Automatic search for a station. 1 Select tuner source Preset station seek "AUTO 2" Search in order of the stations Press the [SRC] button. in the Preset memory. Select the "TUNER" display. Manual "MANUAL" Normal manual
ページ13に含まれる内容の要旨
Example: Frequency Step Setting Desired frequency Press button Changing the tuning frequency step. 92.1 MHz (FM) [0], [9], [2], [1] The original setting is FM band 50 kHz, and AM 810 kHz (AM) [0], [8], [1], [0] band 9 kHz. Canceling Direct Access Tuning 1 Turn the power OFF Press the [DIRECT] button on the remote. Press the [SRC] button for at least 1 second. 2 Switch the frequency step While pressing the [1] and [5] button, press the [SRC] button. Station Preset Memory Release your fingers fr
ページ14に含まれる内容の要旨
Tuner/TV control features Function of the KDC-MP6029 Function of LX BUS Television TV channel Preset Memory Putting the TV channels in the memory. 1 Select the TV band Press the [FM] button. 2 Select the TV channel to put in the memory Push the Control knob to [4] or [¢]. 3 Put the TV channel in the memory Press the desired [1] — [6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 TV channel can be put in the memory on each [1] — [6] button. Function of
ページ15に含まれる内容の要旨
CD/Audio file/External disc control features Release button Control knob SRC SCAN RDM/ REP F.SEL M.RDM 3 IN indicator Track number Track time Disc number When a disc is inserted Playing CD & Audio file Press the [SRC] button. Select the "CD" display. When there is no disc inserted 1 Drop open the faceplate Pause and play Press the Release button. Press the Control knob. Each time the knob is pressed, it pauses and 2 Insert a disc. plays. 3 Push the faceplate on the left side, and return Eject
ページ16に含まれる内容の要旨
CD/Audio file/External disc control features Function of disc changer/ Audio file Playing External Disc Disc Search/Folder Search Playing discs set in the optional accessory disc player connected to this unit. Selecting the disc set in the Disc changer or the folder recorded on the Audio file media. Press the [SRC] button. Select the display for the disc player you want. Push the Control knob to [FM] or [AM]. Display examples: Display Disc player "CD CH" CD changer Function of remote "MD CH" M
ページ17に含まれる内容の要旨
In CD & External disc source Press the [M.RDM] button. Each time the button is pressed, the Magazine Repeat play Display Random Play turns ON and OFF. Track Repeat "TRAC REP" When it’s ON, "MGZN RDM" is displayed. Disc Repeat (In Disc Changer) "DISC REP" OFF "REP OFF" • When the Control knob is pushed to [¢], the next In Audio file random song starts. Repeat play Display File Repeat "FILE REP" Folder Repeat "FOLD REP" OFF "REP OFF" Function of Audio file Folder Select Quickly selecting the fol
ページ18に含まれる内容の要旨
CD/Audio file/External disc control features Text/Title Scroll Scrolling the displayed CD text, Audio file text, or MD title. Hold down on [FM] of the Control knob for at least 1 second. | 18 English
ページ19に含まれる内容の要旨
Menu system MENU SRC Control knob Menu display Menu System 4 Exit Menu mode Press the [MENU] button. Setting during operation beep sound etc. functions. The Menu system basic operation method is • When other items that are applicable to the basic explained here. The reference for the Menu items operation method above are displayed, afterwards their setting content chart is entered. (Normally the and their setting content is after this operation uppermost setting in the chart is the origina
ページ20に含まれる内容の要旨
Menu system In Standby mode The unit can be used. Security Code • If an incorrect code is input, "WAITING" is displayed, Because authorization by the Security Code is and the input prohibited time shown below is required when it’s removed from the vehicle, generated. personalizing this unit is by using the Security After the input prohibited time lapses, "CODE" is Code is a help in preventing theft. displayed, and input can be done. Number of times the Input prohibited time • When the Sec
