ページ1に含まれる内容の要旨
CD-RECEIVER
KDC-MP5029V
KDC-MP5029VG
INSTRUCTION MANUAL
© B64-3051-00/00 (MW)
ページ2に含まれる内容の要旨
Contents Safety precautions 3 Menu system 17 Menu System Notes 4 Security Code Touch Sensor Tone About CDs 5 Manual Clock Adjustment DSI (Disabled System Indicator) About,MP3, and WMA 6 CRSC (Clean Reception System Circuit) Auxiliary Input Display Setting General features 7 Text Scroll Power CD Read Setting Selecting the Source Switches the NTSC/PAL setting Volume Basic Operations of remote 21 Attenuator System Q Accessories/ Audio Control Installation Procedure 23 Audio Setup Speaker Setting C
ページ3に含まれる内容の要旨
Safety precautions About CD players/disc changers 2WARNING connected to this unit To prevent injury or fire, take the KENWOOD disc changers/ CD players released in following precautions: 1998 or later can be connected to this unit. • To prevent a short circuit, never put or leave any Refer to the catalog or consult your Kenwood metallic objects (such as coins or metal tools) dealer for connectable models of disc changers/ inside the unit. CD players. Note that any KENWOOD disc changers/ C
ページ4に含まれる内容の要旨
Notes • If you experience problems during installation, About DAB Tuner control consult your Kenwood dealer. Refer to A group on the Instruction manual of DAB Tuner KTC-9090DAB (optional accessory) for the • If the unit fails to operate properly, press the Reset control method of DAB Tuner function. button. The unit returns to factory settings when However, the following control methods of the the Reset button is pressed. function for this unit may be differed from the • Press the reset
ページ5に含まれる内容の要旨
About CDs Handling CDs Removing CDs • Don’t touch the recording surface of the CD. When removing CDs from this unit pull them out horizontally. CDs that can’t be used • CDs that aren’t round can’t be used. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Don’t stick tape etc. on the CD. • CDs with coloring on the recording surface or that Also, don’t use a CD with tape stuck on it. are dirty can’t be use
ページ6に含まれる内容の要旨
About, MP3 and WMA The playable MP3/WMA file (hereafter called The maximum number of characters for Audio file) and the media format has the following display limitation. The Audio file, which is out of the File/Folder name: 64 (Joliet: 32) characters specification, may not able to be played normally, MP3 ID3 Tag/ or the file and folder names may not be displayed WMA Contents property: 30 characters correctly. • File/Folder name is the number of the characters • Attach the correct extens
ページ7に含まれる内容の要旨
General features ATT/DIM VOL Q SRC Release button Control knob ATT indicator Clock display Power • A disc containing Video CD files can also be played Turning ON the Power back. The Video CD is called the VCD in this manual. Press the [SRC] button. • When the power is ON, the (page 18) is displayed as "CODE ON" or "CODE OFF". Turning OFF the Power Volume Press the [SRC] button for at least 1 second. Increasing Volume Turn the [VOL] knob clockwise. Decreasing Volume Selecting th
ページ8に含まれる内容の要旨
General features Attenuator 3 Select the Audio item for adjustment Press the [VOL] knob. Turning the volume down quickly. Each time the knob is pressed, the items that can Press the [ATT] button. be adjusted switch as shown below. Each time the button is pressed, the Attenuator 4 Adjust the Audio item turns ON and OFF. Turn the [VOL] knob. When it’s ON, the "ATT" indicator blinks. Adjustment Item Display Range Bass level "BAS L" –8 — +8 Middle level "MID L" –8 — +8 System Q Treble level "TRE L
ページ9に含まれる内容の要旨
Speaker Setting Fine-tuning so that the System Q value is optimal • The faceplat e is a precision piece of equipment and when setting the speaker type. can be damaged by shocks or jolts. For that reason, keep the faceplate in its special storage case while 1 Enter Standby detached. Press the [SRC] button. • Do not expose the faceplate or its storage case to Select the "STANDBY" display. direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility o
ページ10に含まれる内容の要旨
General features Switching Display Switching the information displayed. • * If the contents of the information cannot be displayed, Play time is displayed. 1 Enter Switching Display mode • When the clock display is selected, the display setting Press the Control knob for at least 1 second. of each source will be switched to the clock display. "DISP SEL" is displayed. • Album name cannot be displayed in WMA file. 2 Select the Display item Push the Control knob to [4] or [¢]. In Tuner source
ページ11に含まれる内容の要旨
Tuner features AUTO/ AME SRC 1 - 6 Control knob ST indicator Band display Frequency display Preset station number Tuning Tuning mode Display Operation Auto seek "AUTO 1" Automatic search for a station. Selecting the station. Preset station seek "AUTO 2" Search in order of the stations in the Preset memory. 1 Select tuner source Manual "MANUAL" Normal manual tuning control. Press the [SRC] button. Select the "TUNER" display. 2 Select the band Push the Control knob to [FM] or [AM]. Station Prese
ページ12に含まれる内容の要旨
Tuner features Auto Memory Entry Frequency Step Setting Putting stations with good reception in the Changing the tuning frequency step. memory automatically. The original setting is FM band 50 kHz, and AM band 9 kHz. 1 Select the band for Auto Memory Entry Push the Control knob to [FM] or [AM]. 1 Turn the power OFF Press the [SRC] button for at least 1 second. 2 Open Auto Memory Entry Press the [AME] button for at least 2 seconds. 2 Switch the frequency step When 6 stations that can be received
ページ13に含まれる内容の要旨
CD/Audio file/VCD/External disc control features Release button SCAN/ RDM/ REP F.SEL M.RDM Control knob SRC M/S 3 IN indicator Track number Track time Disc number • You cannot use the PBC (Playback Control) function Playing CD, Audio file & VCD even if the media having the PBC function is played back by this system. When there is no disc inserted When a disc is inserted 1 Drop open the faceplate Press the [SRC] button. Press the Release button. Select the "CD" display. 2 Insert a disc. Pause a
ページ14に含まれる内容の要旨
CD/Audio file/VCD/External disc control features Function of disc changer/ Audio file Playing External Disc Disc Search/Folder Search Playing discs set in the optional accessory disc player connected to this unit. Selecting the disc set in the Disc changer or the folder recorded on the Audio file media. Press the [SRC] button. Select the display for the disc player you want. Push the Control knob to [FM] or [AM]. Display examples: Display Disc player "CD CH" CD changer Function of remote "MD C
ページ15に含まれる内容の要旨
In CD ,VCD & External disc source Function of disc changer Magazine Random Play Repeat play Display Track Repeat "TRACK REP" Play the songs on all the discs in the disc changer Disc Repeat (In Disc Changer) "DISC REP" in random order. OFF "REP OFF" Press the [M.RDM] button. Each time the button is pressed, the Magazine In Audio file Random Play turns ON and OFF. Repeat play Display When it’s ON, "MGZN RDM" is displayed. File Repeat "FILE REP" Folder Repeat "FOLD REP" • When the Control knob is
ページ16に含まれる内容の要旨
CD/Audio file/VCD/External disc control features Function of Audio file Function of VCD Folder Select Audio output select Quickly selecting the folder you want to listen to. You can switch the audio output to STEREO, Left or Right. 1 Enter Folder Select mode Press the [M/S] button. Press the [F.SEL] button. "F-SELECT" is displayed. Display Operation During Select mode the folder information is "STEREO" The stereo sound is output. displayed as shown below. "LL" Outputs the Left channel sound to
ページ17に含まれる内容の要旨
Menu system MENU SRC Control knob Menu display Menu System 4 Exit Menu mode Press the [MENU] button. Setting during operation beep sound etc. functions. The Menu system basic operation method is • When other items that are applicable to the basic explained here. The reference for the Menu items operation method above are displayed, afterwards their setting content chart is entered. (Normally the and their setting content is after this operation uppermost setting in the chart is the origina
ページ18に含まれる内容の要旨
Menu system In Standby mode Press the Reset button and when it’s removed from the battery power source Security Code 1 Turn the power ON. Because authorization by the Security Code is 2 Do the step 4 through 7 step operation, and required when it’s removed from the vehicle, reenter the security code. personalizing this unit is by using the Security "APPROVED" is displayed. Code is a help in preventing theft. The unit can be used. • When the Security Code function is activated, it can’t be
ページ19に含まれる内容の要旨
4 Exit Clock adjustment mode 4 Enter Auxiliary input display setting mode Press the [MENU] button. Press the [4] or [¢] button for at least 1 second. The presently selected Auxiliary input display is displayed. In Standby mode DSI (Disabled System Indicator) 5 Select the Auxiliary input display Push the Control knob to [4] or [¢]. A red indicator will blink on the unit after the Each time the button is pressed, the display faceplate is removed, warning potential thieves. switches as shown be
ページ20に含まれる内容の要旨
Menu system In Standby mode CD Read Setting When there is a problem on playing a CD with special format, this setting play the CD by force. Display Setting "CD READ 1" Play CD and Audio file. "CD READ 2" Play CD by force. • Setting "CD READ 2" cannot play Audio file. Some music CDs may not be played back even in the "CD READ 2" mode. In Standby mode Switches the NTSC/PAL setting Switches to the NTSC broadcast mode or PAL broadcast mode setting. Display Setting "PAL" Set this in the PAL broadc
