ページ1に含まれる内容の要旨
CD-RECEIVER
KDC-MP5032
INSTRUCTION MANUAL
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided below. Refer to the model and serial numbers
whenever you call upon your Kenwood dealer for information or service on the produc
ページ2に含まれる内容の要旨
The "AAC" logo is trademark of Dolby Laboratories. | 2 English
ページ3に含まれる内容の要旨
Contents Safety precautions 4 HD Radio control features 20 About HD Radio Notes 5 Tuning About CDs 7 Menu system 21 Menu System About AAC, MP3 and WMA 8 Activating Security Code Deactivating Security Code General features 9 Touch Sensor Tone Power Manual Clock Adjustment Selecting the Source DSI (Disabled System Indicator) Volume Selectable Illumination Attenuator Display Illumination Control System Q Dimmer Audio Control Built-in Amp Setting Audio Setup Dual Zone System Setting Speaker Setting
ページ4に含まれる内容の要旨
Safety precautions Do Not Load 3-in. CDs in the CD slot 2WARNING If you try to load a 3 in. CD with its adapter into the To prevent injury or fire, take the unit, the adapter might separate from the CD and following precautions: damage the unit. • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) About CD players/disc changers inside the unit. connected to this unit • Mounting and wiring this product requires Kenwood disc changers/ CD playe
ページ5に含まれる内容の要旨
Notes • If you experience problems during installation, Before using this unit for the first time consult your Kenwood dealer. This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the • When you purchase optional accessories, check (page 26). with your Kenwood dealer to make sure that they work with your model and in your area. • If the unit fails to operate properly, press the Reset About SIRIUS Satellite radio t
ページ6に含まれる内容の要旨
Notes 2Warning About DAB Tuner control 2CAUTION Refer to A group on the Instruction manual of DAB Use of controls or adjustments or performance of Tuner KTC-9090DAB (optional accessory) for the procedures other than those specified herein may control method of DAB Tuner function. result in hazardous radiation exposure. However, the following control methods of the In compliance with Federal Regulations, following function for this unit may be differed from the are reproductions of labels on,
ページ7に含まれる内容の要旨
About CDs Handling CDs Removing CDs • Do not touch the recording surface of the CD. When removing CDs from this unit pull them out horizontally. CDs that cannot be used • CDs that are not round cannot be used. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Do not stick tape etc. on the CD, or use a CD with • CDs with coloring on the recording surface or CDs tape stuck on it. that are dirty cannot be u
ページ8に含まれる内容の要旨
About AAC, MP3 and WMA The playable AAC/MP3/WMA file (hereafter called The maximum number of characters for Audio file) and the media format has the following display limitation. The Audio file, which is not comforming File/Folder name: 64 characters to the specification, may not play normally, or the MP3 ID3 Tag/ WMA Contents property/ AAC song file and folder names may not display correctly. information: 30 characters Playable Audio file • AAC, MP3, WMA • File/Folder name is the number o
ページ9に含まれる内容の要旨
General features Release button Control knob ATT indicator LOUD indicator Power Volume Turning ON the Power Increasing Volume Press the [SRC] button. Turn the [VOL] knob clockwise. Turning OFF the Power Decreasing Volume Press the [SRC] button for at least 1 second. Turn the [VOL] knob counterclockwise. Selecting the Source Attenuator Turning the volume down quickly. Press the [SRC] button. Press the [ATT] button. Source required Display Each time you press the button, the Attenuator SIRIUS
ページ10に含まれる内容の要旨
General features System Q Adjustment Item Display Range 1 Rear Volume * "R-VOL" 0 — 35 Selecting the best sound setting preset for 2,3 Subwoofer level* "SW L" –15 — +15 different types of music. 4 Bass level* "BAS L" –8 — +8 4 Middle level* "MID L" –8 — +8 1 Select the source to set 4 Treble level* "TRE" –8 — +8 Press the [SRC] button. Balance "BAL" Left 15 — Right 15 2 Select the Sound type 3 Fader* "FAD" Rear 15 — Front 15 Press the [Q] button. Exit Audio Control mode (Volume control mode)
ページ11に含まれる内容の要旨
Adjustment Item Display Range Speaker Setting 2 Front High Pass Filter* "HPF" Through/40/60/80/100/120/ Fine-tuning so that the System Q value is optimal 150/180/220 Hz when setting the speaker type. 2 Rear High Pass Filter* "HPR" Through/40/60/80/100/120/ 150/180/220 Hz 1 Enter Standby 1,2 50/60/80/100/120/ Low Pass Filter* "LPF" Press the [SRC] button. Through Hz Select the "STANDBY" display. 1,2,3 Subwoofer Phase* "PHAS" Reverse (180°)/ Normal (0°) 2 Enter Speaker Setting mode Volume offset
ページ12に含まれる内容の要旨
General features Switching Display Band & Channel number "CH NUM" Clock "CLOCK" Changing the information displayed. In Standby/ Auxiliary input source 1 Enter Switching Display mode Press the Control knob for at least 1 second. Information Display "DISP SEL" is displayed. Source name "SRC NAME" Clock "CLOCK" 2 Select the Display item Push the Control knob towards [4] or 3 Exit Switching Display mode [¢]. Press the Control knob. In Tuner source Information Display • * If the contents of the in
ページ13に含まれる内容の要旨
Theft Deterrent Faceplate TEL Mute The faceplate of the unit can be detached and The audio system automatically mutes when a taken with you, helping to deter theft. call comes in. Removing the Faceplate When a call comes in Press the Release button. "CALL" is displayed. The faceplate is unlocked, allowing you to detach The audio system pauses. it. Listening to the audio during a call Press the [SRC] button. The "CALL" display disappears and the audio system comes back ON. When the call ends Ha
ページ14に含まれる内容の要旨
Tuner features Control knob Band display Frequency display Preset station number ST indicator Tuning Tuning Mode Selecting the station. Choose the tuning mode. Press the [AUTO] button. 1 Select tuner source Each time you press the button, the Tuning Press the [SRC] button. mode alternates between the modes shown in Select the "TUNER" display. the table below. 2 Select the band Tuning mode Display Operation Push the Control knob towards [FM] or [AM]. Auto seek "AUTO 1" Automatic search for
ページ15に含まれる内容の要旨
Function of remote control Auto Memory Entry Direct Access Tuning Putting stations with good reception in the memory automatically. Entering the frequency and tuning. 1 Select the band for Auto Memory Entry 1 Select the band Push the Control knob towards [FM] or [AM]. Press the [FM] or [AM] button. 2 Enter Direct Access Tuning mode 2 Open Auto Memory Entry Press the [DIRECT] button on the remote Press the [AME] button for at least 2 seconds. control. "A-MEMORY" is displayed. "– – – –" is displa
ページ16に含まれる内容の要旨
CD/Audio file/External disc control features Control knob Play time Track number IN indicator Disc number Each time you press the knob, the audio pauses Playing CD & Audio file or plays. When there is no disc inserted Eject the disc 1 Open the panel 1 Eject the disc Press the [0] button. Press the [0] button. 2 Insert a disc. 2 Return the panel to the original position Press the [0] button. • When the faceplate slides open, it might interfere with the shift lever or other vehicle func
ページ17に含まれる内容の要旨
Pause and play Function of disc changer/ Audio file Press the Control knob. Disc Search/Folder Search Each time you press the knob, the audio pauses Selecting the disc set in the Disc changer or the or plays. folder recorded on the Audio file media. Push the Control knob towards [FM] or [AM]. • Disc 10 is displayed as "0". • The functions that can be used and the information that can be displayed will differ depending on the external disc players being connected. Function of remote control
ページ18に含まれる内容の要旨
CD/Audio file/External disc control features Function of disc changer Track/File/Disc/Folder Repeat Magazine Random Play Replaying the song, disc in the Disc changer or Audio file folder you are listening to. Play the songs on all the discs in the disc changer in random order. Press the [REP] button. Each time you press the button, the Repeat Play Press the [M.RDM] button. alternates between the modes shown in the Each time you press the button, the Magazine tables below. Random Play turns ON
ページ19に含まれる内容の要旨
3 Decide the folder to play Press the Control knob. The Folder Select mode releases, and the Audio file in the folder being displayed plays. Cancelling the Folder Select mode Press the [F.SEL] button. Text/Title Scroll Scrolling the displayed CD text, Audio file text, or MD title. Push the Control knob toward [FM] for at least 2 seconds. • When the (page 23) is set to OFF, the display may black out while scrolling. English | 19
ページ20に含まれる内容の要旨
HD Radio control features Control knob Band display Frequency display Preset station number ST indicator About HD Radio Tuning Selecting the station. • When you connect an HD Radio, Tuner features of the unit are disabled and changed to HD 1 Select HD Radio source Radio tuner features. A portion of the setting Press the [SRC] button. methods including the Tuning Mode will Select the "HD RADIO" display. change. 2 Select the HD FM band • With the HD Radio tuner, you can use the Push the Cont
