ページ1に含まれる内容の要旨
KDC-MP2035
KDC-MP235
KDC-MP205
KDC-MP235CR
CD-RECEIVER
INSTRUCTION MANUAL
AMPLI-TUNER LECTEUR DE CD
MODE D’EMPLOI
REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM
MANUAL DE INSTRUCCIONES
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the
ページ2に含まれる内容の要旨
Contents Safety precautions 3 Menu system 18 Menu System Notes 4 Activating Security Code Deactivating Security Code General features 7 Touch Sensor Tone Power Manual Clock Adjustment Selecting the Source DSI (Disabled System Indicator) Volume Dimmer Attenuator Switching preout Audio Control Supreme Setting Audio Setup CRSC (Clean Reception System Circuit) Bass Boost Receive mode Setting Speaker Setting SIRIUS ID (ESN) display Switching Display Auxiliary Input Display Setting Subwoofer Output Te
ページ3に含まれる内容の要旨
Safety precautions About CD players/disc changers connected 2WARNING to this unit To prevent injury or fire, take the following Kenwood disc changers/ CD players released in 1998 precautions: or later can be connected to this unit. • To prevent a short circuit, never put or leave any Refer to the catalog or consult your Kenwood dealer metallic objects (such as coins or metal tools) inside for connectable models of disc changers/ CD players. the unit. Note that any Kenwood disc changers/ CD
ページ4に含まれる内容の要旨
Notes • If you experience problems during installation, Cleaning the Unit consult your Kenwood dealer. If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. • When you purchase optional accessories, check with If the faceplate is stained badly, wipe the stain off with your Kenwood dealer to make sure that they work a cloth moistened with neutral cleaner, then wipe it with your model and in your area. again with a clean soft dry cloth. • We recomme
ページ5に含まれる内容の要旨
About Audio file Handling CDs • Playable Audio file • Do not touch the recording surface of the CD. MP3 (.mp3), WMA (.wma) • Do not stick tape etc. on the CD, or use a CD with tape stuck on it. • Playable disc media • Do not use disc type accessories. CD-R/RW/ROM • Clean from the center of the disc and move • Playable disc file format outward. ISO 9660 Level 1/2, Joliet, Romeo, Long file name. • When removing CDs from this unit, pull them out Although the audio files are complied with the
ページ6に含まれる内容の要旨
Notes About SIRIUS Satellite radio tuner 2CAUTION Use of controls or adjustments or performance of (KDC-MP2035/KDC-MP235) procedures other than those specified herein may Refer to the instruction manual of SIRIUS Satellite result in hazardous radiation exposure. radio tuner KTC-SR901/SR902/SR903 (optional In compliance with Federal Regulations, following accessory), when connected, for the operation are reproductions of labels on, or inside the product method. relating to laser product s
ページ7に含まれる内容の要旨
General features Release button Control knob Auxiliary input Clock display ATT indicator Power ⁄ • ** Function of KDC-MP2035/KDC-MP235 Turning ON the Power • Use the mini-plug which is stereo type and does not Press the [SRC] button. have any resistance. Turning OFF the Power Press the [SRC] button for at least 1 second. Volume Increasing Volume Selecting the Source Turn the [VOL] knob clockwise. Press the [SRC] button. Decreasing Volume Source required Display Turn the [VOL] knob countercloc
ページ8に含まれる内容の要旨
General features Audio Control 2 Enter Audio Setup mode Press the [VOL] knob for at least 1 second. 1 Select the source to adjust 3 Select the Audio Setup item to adjust Press the [SRC] button. Press the [VOL] knob. 2 Enter Audio Control mode Each time you press the knob, the item to be Press the [VOL] knob. adjusted alternates between the items shown in the table below. 3 Select the Audio item to adjust Press the [VOL] knob. 4 Adjust the Audio setup item Each time you press the knob, the item
ページ9に含まれる内容の要旨
In HD Radio source 3 Select the Speaker type Turn the [VOL] knob. Information Display Each time you turn the knob, the setting alternates Station name "ST NAME" between the settings shown in the table below. Song title/ Artist name/ "TITLE" Album name/ Genre Speaker type Display Frequency "FREQ" OFF "SP OFF" Clock "CLOCK" For 5 & 4 in. speaker "SP 5/4" For 6 & 6x9 in. speaker "SP 6*9/6" In Standby/ Auxiliary input source For the OEM speaker "SP OEM" Information Display 4 Exit Speaker Setting mo
ページ10に含まれる内容の要旨
General features Theft Deterrent Faceplate TEL Mute The faceplate of the unit can be detached and taken The audio system automatically mutes when a call with you, helping to deter theft. comes in. Removing the Faceplate When a call comes in Press the Release button. "CALL" is displayed. The faceplate unlocks, allowing you to detach it. The audio system pauses. € Listening to the audio during a call • The faceplate is a precision piece of equipment and can Press the [SRC] button. be damaged by
ページ11に含まれる内容の要旨
Tuner features Control knob ST indicator Band display Frequency display Preset station number Tuning Tuning Mode Selecting the station. Choose the tuning mode. Press the [AUTO] button. 1 Select tuner source Each time you press the button, the Tuning mode Press the [SRC] button. alternates between the modes shown in the table Select the "TUNER" display. below. 2 Select the band Tuning mode Display Operation Push the Control knob towards [FM] or [AM]. Auto seek "AUTO 1" Automatic search for a s
ページ12に含まれる内容の要旨
Tuner features Station Preset Memory Putting a station in the memory. 1 Select the band Push the Control knob towards [FM] or [AM]. 2 Select the frequency to put in the memory Push the Control knob towards [4] or [¢]. 3 Put the frequency in the memory Press the desired [1] — [6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [1] — [6] button. Auto Memory Entry Putting stations with good reception in the memory a
ページ13に含まれる内容の要旨
CD/Audio file/External disc control features Control knob Disc number IN indicator Track number Play time Function of KDC-MP2035/KDC-MP235 Playing CD & Audio file Playing External Disc When a disc is inserted Playing discs set in the optional accessory disc Press the [SRC] button. player connected to this unit. Select the "CD" display. Press the [SRC] button. ⁄ Select the display for the disc player you want. • When a CD is inserted, the "IN" indicator is ON. Display examples: Pause and pla
ページ14に含まれる内容の要旨
CD/Audio file/External disc control features Function of KDC-MP2035/KDC-MP235 Fast Forwarding and Reversing Function of remote control Fast Forwarding Direct Track/File Search Hold down toward [¢] with the Control knob. Doing Track/File Search by entering the track/file Release to resume the playback. number. Reversing 1 Enter the track/file number Hold down toward [4] with the Control knob. Press the number buttons on the remote Release to resume the playback. control. ⁄ 2 Do Track/File Searc
ページ15に含まれる内容の要旨
Track/File/Disc/Folder Repeat Random Play Replaying the song, disc in the Disc changer or Play all the songs on the disc or Audio file folder in Audio file folder you are listening to. random order. Press the [REP] button. Press the [RDM] button. Each time you press the button, the Repeat Play Each time you press the button, Random Play turns alternates between the modes shown in the tables ON or OFF. below. When the Random mode is ON, "DISC RDM"/"FOLD RDM" is displayed. In CD & External disc
ページ16に含まれる内容の要旨
CD/Audio file/External disc control features Function of Audio file Text/Title Scroll Folder Select Scrolling the displayed CD text, Audio file text, or MD title. Quickly selecting the folder you want to hear. Push the Control knob toward [FM] for at least 1 Enter Folder Select mode 2 seconds. Press the [F.SEL] button. "FLD SEL" is displayed. During Select mode the folder information is displayed as shown below. Folder name display Displays the current folder name. 2 Select the folder level P
ページ17に含まれる内容の要旨
Function of KDC-MP2035/KDC-MP235 HD Radio control features Control knob ST indicator Band display Frequency display Preset station number About HD Radio Tuning Selecting the station. • When you connect an HD Radio, Tuner features of the unit are disabled and changed to HD Radio 1 Select HD Radio source tuner features. A portion of the setting methods Press the [SRC] button. including the Tuning Mode will change. Select the "HD RADIO" display. • With the HD Radio tuner, you can use the simila
ページ18に含まれる内容の要旨
Menu system Control knob Menu display Menu System 4 Exit Menu mode Press the [MENU] button. Setting beep sound during operation, etc. ⁄ functions. The Menu system basic operation method is • When other items those applicable to the basic operation method above are displayed, their setting explained here. The reference for the Menu items content chart is entered. (Normally the setting listed at and their setting content is after this operation the top of the chart is the original setting.)
ページ19に含まれる内容の要旨
• To deactivate the Security Code function, see the next ⁄ section . • You can set the Security Code with a 4 digit number of your choice. • The Security Code cannot be displayed or referenced. Make a note of the Security Code and treasure it up. Function of KDC-MP2035/KDC-MP235 1 Enter Standby In Standby mode Press the [SRC] button. Deactivating Security Code Select the "STANDBY" display. To deactivate the Security Code function. 2 Enter Menu mode Press the [MENU]
ページ20に含まれる内容の要旨
Menu system In Standby mode Display Setting Manual Clock Adjustment "SWPRE R" Rear preout. "SWPRE SW" Subwoofer preout. 1 Select Clock Adjustment mode Push the Control knob towards [FM] or [AM]. Select the "CLK ADJ" display. In Audio file source 2 Enter Clock Adjust mode Press the Control knob for at least 1 second. Supreme Setting The clock display blinks. When MP3 or WMA files encoded at a low bit rate 3 Adjust the hours (less than 96kbps (fs=32k, 44.1k, 48kHz)) are played, Push the Control
