ページ1に含まれる内容の要旨
CD-RECEIVER
KDC-7080R
INSTRUCTION MANUAL
KDC-7080RV
COMPACT
DIGITAL AUDIO
© B64-1596-00 (EW)
ページ2に含まれる内容の要旨
Contents Before use Random Play......................................................................................24 Safety precautions ...............................................................................3 Magazine Random Play .....................................................................25 Handling Compact discs ......................................................................6 Text Scroll ................................................................................
ページ3に含まれる内容の要旨
Safety precautions IMPORTANT INFORMATION 2WARNING 2CAUTION You cannot connect the unit directly to the following CD automatic changers. For users To prevent injury and/or fire, take the To prevent damage to the machine, who want to use older changers with the following precautions: take the following precautions: unit, follow the directions below according to • Insert the unit all the way until it is fully • Make sure to ground the unit to a negative the type of changer you own: locked in place.
ページ4に含まれる内容の要旨
Safety precautions • The illustrations of the display and the panel Mask key NOTE appearing in this manual are examples used If you have transmitted the Mask Key's to explain more clearly how the controls are • If you experience problems during signal once to the unit in advance, you will used. Therefore, what appears on the display installation, consult your Kenwood dealer. have to transmit it once again if the unit has in the illustrations may differ from what been removed from the battery. T
ページ5に含まれる内容の要旨
Cleaning the Faceplate Terminals The marking of products using lasers If the terminals on the unit or faceplate get (Except for some areas) dirty, wipe them with a dry, soft cloth. CLASS 1 Cleaning the Unit LASER PRODUCT If the front panel gets dirty, turn off the power and wipe the panel with a dry silicon The label is attached to the chassis/case and cloth or soft cloth. says that the component uses laser beams 2CAUTION that have been classified as Class 1. It means that the unit is utilizing
ページ6に含まれる内容の要旨
Handling Compact discs Playing a CD that is dirty, scratched Cleaning CDs Do Not Load CD Accessories in Slot or warped can cause the sound to If a CD has become dirty, wipe it off gently Do not use commercially available CD using a commercially available cleaning cloth accessories that can be loaded into the CD skip and the unit to operate or a soft cotton cloth, starting from the slot, such as stabilisers, protective sheets, incorrectly, resulting in worsened centre of the disc and moving outwa
ページ7に含まれる内容の要旨
General features Power 4 ¢
d uATT FM SRC Á
You can help prevent theft of the unit by reversing the faceplate so that the control panel cannot be seen, hiding the unit, and shutting off the audio. EJECT Power ON/OFF: When you turn your vehicle’s ignition on, the unit’s power will DISP also turn on, with the faceplate reversing to show the control panel. When you turn your vehicle's ignition off, the faceplate will reverse to hide the control panel after a period of time which AUD CLK ATT / LOU
ページ8に含まれる内容の要旨
General features Switching Modes Volume Switching Modes: Increasing Volume: Each time you press the SRC button, the mode switches as Press the u button to turn up the volume. follows: Decreasing Volume: Press the d button to turn down the volume. Tuner mode CD mode External disc control mode 1 Attenuator This function allows you to turn down the volume quickly. External disc control mode 2/AUX mode Turning Attenuator On/Off: Standby mode Press the ATT button to switch the attenuator on and off.
ページ9に含まれる内容の要旨
1 Press the AUD button to enter the control mode. "Bass F" : Adjust the centre frequency of the bass. 2 Setting values: 60 / 70 / 80 / 100 (Only when the bass quality Selecting mode factor is set to 1.00, 1.25 or 1.50) / 150 (Only when the bass Press either the FM or AM button. quality factor is set to 2.00) Hz Each time the button is pressed, the adjustment mode will change. NOTE Please refer to the following for the contents of the This mode is available only when the Sound coordinate system i
ページ10に含まれる内容の要旨
General features quality factor, bass extension, treble center frequency, and "TreF" : Adjust the centre frequency of the treble. treble level adjust mode. Setting values: 10.0 / 12.5 / 15.0 / 17.5 kHz NOTE NOTE • This setting can be made only when the Sound coordinate This mode is available only when the Sound coordinate system is system is on. (page31) on. ( page31). • The settings you can preset are, bass centre frequency, bass level, bass quality factor, bass extension, treble centre frequen
ページ11に含まれる内容の要旨
• When you change the setting of type of speaker, the bass and "CALL" disappears from the display, and the volume of the treble tone settings are returned to original levels. original source is restored gradually. Turning TEL Mute Function Off After Phone Call: Hang the phone up. "CALL" disappears from the display. The original source (i.e., the one used before the phone call) is Switching Display returned to automatically, and the volume restored gradually. You can change the display in each mo
ページ12に含まれる内容の要旨
General features • When removing the faceplate, pull it out only when it is fully Removing the Faceplate open. The detachment of the faceplate whilst it is moving might The faceplate can be detached from the unit, helping to deter result in damage to the unit. theft. • Do not apply excessive force to the faceplate bracket without attaching the faceplate. Doing so will cause the faceplate Removing the faceplate: bracket to be deformed. 1 Choose the way from among the following and open the • Do n
ページ13に含まれる内容の要旨
the faceplate was mounted, check that the faceplate is securely NOTE attached to the faceplate bracket by holding its right side and When you set the Manual Open Button setting to 2 or 3, press pulling it gently towards you. the upper left part of the faceplate without pausing. If you do not press that part without pausing, the command cannot be verified correctly. Forced Closing This function prevents tampering with the unit your car is being serviced etc. Hiding the unit with the ignition turn
ページ14に含まれる内容の要旨
Tuner features Tuning 4 FM SRC ¢
1 Press the SRC button repeatedly until the tuner mode is obtained. "TUNER" is displayed only when the tuner mode is selected. EJECT 2 Press either the FM or AM button to select the band. Each time you press the FM button, the band switches DISP between the FM1, FM2 and FM3. Press the AM button to select the MW and LW bands. 3 • Auto Seek Tuning #1 - 6 TI/VOL ADJ DISP/NAME.S AM Press the ¢ button to seek increasing frequencies. Press the 4 button to seek decreas
ページ15に含まれる内容の要旨
1 2 Select the band/ station that you want to have stored. Once the name is displayed for the station you want to listen to 2 Hold down the button (#1-6) that you want to use for the Press the OK button. station, for two seconds or more. Reception starts of the displayed station, and the seek mode The button number blinks once in the display to indicate that ends. the data has been stored. Cancelling mode during input: Recalling a Preset Station: Press the DNPP button. Press the preset station
ページ16に含まれる内容の要旨
Tuner features RDS features Switching Display for Tuner 4 ¢
FM 38(PTY) You can change the display used when listening to the radio. Switching the Display: EJECT Pressing the DISP button switches the display as follows. Select the Radio Text Display mode. DISP Programme Service name (during RDS station reception)/Station frequency Radio text AM #1 - 6 TI/VOL ADJ DISP/NAME.S Displaying Frequencies: Hold down the DISP button for one second or more. The frequency for the RDS station will be display
ページ17に含まれる内容の要旨
RDS (Radio Data System) Traffic Information Function RDS is a digital information system that lets you receive You can listen to traffic information. If you are listening to signals besides those of regular radio programmes, such as tapes or discs, they will continue playing until a traffic bulletin network information being transmitted from radio stations. is broadcast. When listening to an RDS station (ie, a station with RDS Turning TI function On/Off: capability), the programme service name o
ページ18に含まれる内容の要旨
RDS features 17. Finance (Finance) Programme Type (PTY) Function 18. Children’s programmes (Children) Conduct auto seek tuning only on those stations with selected 19. Social Affairs (Social A) kinds of programmes. 20. Religion (Religion) 21. Phone In (Phone In) 1 Press the 38(PTY) button. 22. Travel (Travel) "PTY" is displayed, and the Programme Type Selection (PTY) 23. Leisure (Leisure) Mode entered. 24. Jazz Music (Jazz) If you make no key input in 30 seconds, the mode will 25. Country Music
ページ19に含まれる内容の要旨
Cancelling Programme Type Function During Its Operation: 2 Holding down the DISP button for one second or more results Press the 38(PTY) button. in one scrolling display of the text. To scroll automatically: 1 Press the DISP button to display the Radio Text. The text will be displayed in one scrolling display. 2 Holding down the DISP button for one second or more results in one scrolling display of the text. NOTE Presetting Volume for Traffic Information/News Please see the menu settings (page34
ページ20に含まれる内容の要旨
CD/External disc control features When a unit equipped with an O-N switch is to be connected, please also see the instruction manual of this 4 DISC+ 38 SRC Á
¢
unit. Set the O-N switch to "N". "N"-operation will be set. "N"-operation: EJECT • The disc title and track title of the CD text can be displayed. • The disc name will be displayed when the name has been registered to any connected unit with the Presetting Disc DISP Names function, or when the playing unit contains a disc to which the d
