ページ1に含まれる内容の要旨
CD-PLAYER
KDC-D300
INSTRUCTION MANUAL
COMPACT
© B64-1430-00 (E) (MC)
DIGITAL AUDIO
00/2 1 99/12 11 10 9 8 7 6 5 4 3 2 1
ページ2に含まれる内容の要旨
Contents Before use Safety Precautions ........................................................................3 Handling Compact Discs...............................................................5 Operations Buttons and Display ......................................................................6 Playing CDs...................................................................................6 Switching Spectrum Analyzer Display...........................................7 Presetting Disc Names
ページ3に含まれる内容の要旨
Safety precautions 2WARNING 2CAUTION 2CAUTION To prevent injury or fire, take the To prevent damage to the machine, Do Not Load 3-in. CDs in the CD slot following precautions: take the following precautions: If you try to load a 3 in. CD with its adapter into the unit, the adapter might separate from • Insert the unit all the way in until it is fully • Make sure to ground the unit to a negative the CD and damage the unit. locked in place. Otherwise it may fall out of 12V DC power supply. place w
ページ4に含まれる内容の要旨
Safety precautions Cleaning the Faceplate Terminals Cleaning the CD Slot If the terminals on the unit or faceplate get As dust can accumulate in the CD slot, clean dirty, wipe them with a dry, soft cloth. it occasionally. Your CDs can get scratched if you put them in a dusty CD slot. Cleaning the Unit If the front panel gets dirty, turn off the power and wipe the panel with a dry silicon cloth or soft cloth. 2CAUTION Do not wipe the panel with a stiff cloth or a cloth dampened by volatile solven
ページ5に含まれる内容の要旨
Handling Compact discs Playing a CD that is dirty, scratched Cleaning CDs Do Not Load CD Accessories or warped can cause the sound to If a CD has gotten dirty, wipe it off gently Do not use commercially available CD using a commercially available cleaning cloth accessories that can be loaded into the CD skip and the unit to operate or a soft cotton cloth, starting from the slot, such as stabilizers, protective sheets, or incorrectly, resulting in worsened center of the disc and moving outward.
ページ6に含まれる内容の要旨
Operations drop to the front, thereby exposing the CD slot. Buttons and Display 2 Holding the CD with the labeled side facing up, insert it in the Release button slot. The CD will start playing. 3 Push back on the right side of the faceplate with your hand until it locks. CD PLAYER KDC-D300 INTEGRATED QUAD MENU 1 BIT D/A CONVERTER DISP NOTE • Select "CD2" when this unit is connected to tha CD receiver. DPAC • Selection of the "CD" mode when a CD has not been loaded 11BAND11BAND DIGITAL OPTI
ページ7に含まれる内容の要旨
Switching Spectrum Analyzer Display Presetting Disc Names You can select the display to enjoy sounds with eyes. NOTE Depending on the centre unit, the number of characters and/or Operation for "N" Setting: Each time you press the DISP button, the spectrum analyzer the number of discs that can be preset may differ, or operations may not be possible. display switches as following table; Operation for "O" Setting: Operation for "N" Setting: This unit permits up to 12 characters to be used for disc
ページ8に含まれる内容の要旨
Operations Eject Theft Deterrent Faceplate The faceplate of the unit can be detached and taken with you, A press of the 0 button stops the CD play and ejects the CD. helping to deter theft. 0 Removing Faceplate: Press the release button and drop open the faceplate. In its dropped condition, whilst drawing the faceplate to one side, pull it to the front and remove it. Release button CD PLAYER KDC-D300 INTEGRATED QUAD 1 BIT D/A CONVERTER DISP NOTE DPAC DIGITAL OPTIMUM 11BAND SERVO CONTROL 60 12
ページ9に含まれる内容の要旨
Accessories External view External view ......... Number of items ......... Number of items Reattaching Faceplate: Hold the faceplate so that the operation face faces the front 3 1 toward you and press until it .........2 .........2 locks. The faceplate will be set and the unit will be operational. 4 NOTE 2 .........1 .........1 When there is difficulty in setting the faceplate, align the depression on the left side of the faceplate with the shaft of the unit, then lock. Shaft Depression 2CAUTIO
ページ10に含まれる内容の要旨
Installation Procedure Connections The O-N switch should be set according to the Centre unit in use Centre unit as well as to the connected models. When the centre unit is compatible with the "N"-operation, set the O-N switch to "N". When it is not compatible with the "N"- operation, set the O-N switch to "O" because the operation is not available. The initial setting of the switch is "N". Control input 1. To prevent a short circuit, remove the key from the ignition and disconnect the - battery
ページ11に含まれる内容の要旨
Installation Installation Firewall or metal support Accessory2 Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and Metal mounting strap Self-tapping attach it in place. (commercially available) screw (commercially available) On cars where there is no compartment in the centre for installing a car audio unit: Use the spacer 3 to affix the centre unit sleeve and the sleeve attached to the main unit in such a way that they are correctly aligned both depthwise and horizo
ページ12に含まれる内容の要旨
Installation Removing the hard rubber frame Removing the Unit 1 1 Refer to the section “Removing the hard rubber frame” and Engage the catch pins on the removal tool and remove the two then remove the hard rubber frame. locks on the lower level. Lower the frame and pull it forward as shown in the figure. 2 Remove the Hex-head screw with integral washer (M4 8) on the back panel. 3 Insert the two removal tools deeply into the slots on each side, Catch as shown. Lock Accessory2 Catch facing up Acce
ページ13に含まれる内容の要旨
Troubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. PROBLEM POSSIBLE CAUSE SOLUTION The disc control mode cannot No cable has been connected to the disc changer input Connect the control cable to the disc changer input terminal be selected. terminal on the unit. on the centre unit. No CD has been inserted. For centre units brought on to the
ページ14に含まれる内容の要旨
Troubleshooting Guide The following messages are displayed on the centre unit when certain problems are occurring in your system. Take the recommended actions. No CD in the unit. E-01 ] Insert the CD. EJECT The faceplate of this unit has been removed. NO PANEL ] Replace it. E-30 The CD is quite dirty. The CD is upside-down. The CD is scratched a lot. E-04 ] Clean the CD and load it correctly. The unit is malfunctioning for some reason. E-99 ] Press the reset button on the centre unit. If the "E-
ページ15に含まれる内容の要旨
Specifications Specifications subject to change without notice. CD player section General Laser diode ....................................................GaAlAs ( =780 nm) Operating voltage ..............................14.4 V (11 – 16 V allowable) Digital filter (D/A)......................................8 Times Over Sampling Current consumption............................................................0.6 A D/A Converter ......................................................................1
